Submersible (Drainage) Pumps

RX Submersible DRAINAGE pump in stainless steel for clear water INSTALLATION AND USE The RX series pumps are suitable for use with clear water that does not contain abrasive particles. As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable. They are suitable for use in fixed installations and applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps. FEATURES Liquid type: clean water Uses: domestic, civil

Load capacity up to 650 l/min (39.0 m3/h) Prevalence up to 15m

The RC900 is a multistage submersible pump ideal for the transfer and pressurisation of clean water. The pump has a stainless steel construction and impeller with Noryl diffuser. Applications include: Boosting Domestic and industrial use Agriculture and farms Irrigation Water distribution Rainwater harvesting systems

The SAM 316-130/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. Fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 230v motor is fitted with internal overloads and internal starting capacitors. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater conditions.

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

750W Submersible Pump with integrated float switch. This submersible pump is ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particles up to 35mm dia. The integrated float switch will switch off the pump motor once the water level is reduced to a defined level. Being integrated within the pump housing it is usable in a more confined space than would be the case with conventional float switches Note: Suitable for use with clean or dirty water