Power Tool Accessories Makita

Features:- Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.- Application: Woodworking. Jigsaws. Joinery. Cabinet making- Features: Extra sharp teeth give a fine, fast cut- Fast cutting and an excellent finish- Tooth Type/Set: Ground and Taper Ground TeethSpecifications:Tooth Spacing - 3.2 mmOverall Length - 80 mmShank - Universal Plywood - 4 - 65 mmPlastics - 4 - 65 mmTeeth per Inch - 8 Pack Quantity - 5

Features:- Ideal for fast cutting of medium/thick work pieces- Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.- Application: Woodworking. Joinery. Kitchens- Features: Long length blade. Very sharp teeth.- Ideal for fast cutting of medium/thick work pieces- Tooth Type/Set: Ground and Side Set TeethSpecifications:Tooth Spacing - 4.2 mmOverall Length - 75 mmShank - Universal Plywood - 5 - 65 mmPlastics - 5 - 65 mmTeeth per Inch - 6 Pack Quantity - 5

Features:- Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.- Application: Woodworking Cabinet making. Worktops. Kitchens. Joinery- Features: Down cutting blade is designed to minimise chipping of upper surface of work piece- Essential in kitchens and cutting other expensive materials- Tooth Type/Set: Ground and Taper Ground TeethSpecifications:Tooth Spacing - 2.1 mmOverall Length - 65 mmShank - Universal Plywood - 3 - 50 mmPlastics - 3 - 50 mmTeeth per Inch - 12Pack Quantity - 5

Features:- Application: Stainless. Cladding. Roofing. Steel. Trunking sheet.- Features: HSS blade designed for metal cutting- Cuts up to 3mm in most metals including stainless- Tooth Type/Set: B - Milled and Wavy Set TeethSpecifications:Tooth Spacing - 1.1 mmOverall Length - 50 mmShank - Universal Aluminium - 1 - 3 mmPlastics - 1 - 6 mmStainless Steel - 1 - 3 mmMild Steel - 1 - 3 mmTeeth per Inch - 24 Pack Quantity - 5

Features:- Application: Stainless. Cladding. Roofing. Steel. Trunking sheet.- Features: HSS blade designed for metal cutting- Cuts up to 3mm in most metals including stainless- Tooth Type/Set: B - Milled and Wavy Set TeethSpecifications:Tooth Spacing - 1.8 mmOverall Length - 50 mmShank - Universal Plywood - 3 - 35 mmAluminium - 2 - 6 mmPlastics - 3 - 35 mmStainless Steel - 1 - 3 mmMild Steel - 2 - 6 mmTeeth per Inch - 14 Pack Quantity - 5

For hardwood, thick mild steel plate and tough plastics. Tungsten carbide grit tooth.Features:- Cuts up 60mm in wood and 6mm in metal- Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.- Application: Plate metal. Engineering. Hard wood- Features: HSS blade designed for cutting hardwood or thick metal plate- Tooth Type/Set: Milled and Side Set TeethSpecifications:Tooth Spacing - 2.8 mmOverall Length - 75 mmShank - Universal Plywood - 3 - 60 Aluminium - 3 - 6 mmPlastics - 3 - 60 mmMild Steel - 3 - 9 Teeth per Inch - 9 Pack Quantity - 5

Makita's range of metal cutting saw blades are designed to cut faster, cleaner and quicker
The Makita B-33526 / MCCS13630E Specialized Circular Saw Blade for Metal Cutting measures 136mm in diameter and fits the Makita DCS550 Saw. Specially formulated carbide with a unique tip design resists breakage on impact and lasts longer when cutting mild steel, sheet, pipe, channel and threaded rod. Cutting quicker and cleaner, makita's metal cutting blades will outlast traditional abrasive discs by up to 30 times.Features:
- Specially formulated carbide tips precision ground for fast clean cutting
- Low sparking and minimal dust production
- Cool cuts with burr free edges
- Reduced cost per cutSpecification: …

Makita B-40559 Band Saw Blades for DPB181/DPB182 (Pack Of 5) The Makita B-40559 is a pack of 5 Blades to fit the Makita DPB181or DPB182 Portable Band Saw.  Features:
- Bi-Metal Blade
- For cutting work surfaces of 2-3mm thickness
- Application: Non-Ferrous metals, Mild Steel, Cast Steel, Cast Iron and Stainless Steel Specification:
- Quantity: 5
- Blade length: 835mm
- Blade width: 13mm
- Capacity - Pipe: 64mm (dia)

Features:- Sub-brand: Super Express- Application: Jigsaws. Wood, Plywood Plastics Sheet metal. Trunking. Cordless- Features: Super express blade offers progressive teeth and slim body for very fast cutting in most materials- Less Vibration, Fine Cut, High Speed Cutting, Cut Through Thick and Thin Materials with the same bladeSpecifications:Overall Length - 75 mmShank - Universal Plywood - 5 - 50 Plastics - 5 - 50 mmTeeth per Inch - 2.4 - 5 Pack Quantity - 5

Makita B-53 wood cutting splinter jigsaw blades - straight cut in laminates, wooden flooring and decorative woods. (Splinter free).Specifications:Overall Length - 82.6 mmShank - Universal Teeth per Inch - 15 Pack Quantity - 5

Suitable for Makita 9920, 9903 and 9404 Belt Sanders.Features & Benefits• Cloth bag for efficient collection • Better finish. Less dust • Compatible with 9920, 9903 and 9404 Belt Sanders

Makita D-03903 Circular Saw Blade for Wood 185 x 30 x 16 Teeth  The Makita D-03903 is a Standard Blade for a Portable Saw. It has a Diameter of 185mm with a tooth count of 16, suited to faster cutting with a rough finish.  Features:  
- Application: Wood, carpentry, joinery 
- Good cutting speed at low cost   Specification: 
- Bore: 30mm 
- Diameter (D): 185 mm 
- Kerf (K): 1.8 mm 
- Rake (R): 20 ° 
- Thickness (T): 1.2 mm 
- Tooth Count: 16 
- Material Type: Wood 
- Weight: 0.6kg 

The new and improved DEAWST06, this Makita Saw Stand is compatible with most Makita mitre saws The Makita DEBWST06 mitre saw stand is similar to the older DEAWST06, only now with a new bracket design. The stand is easy to assemble with tool-less installation and removal of the mitre saw. The sturdy lightweight aluminium construction can support a maximum weight of 225kg/500lb. The DEBWST06 is 1150mm wide with extendable arms up to 2550mm. It weighs 15.3kg and folds away flat for easy storage. The stand is applicable to all Makita mitre saws except for the following models: DLS600, LH1040/F and LH1201FL. Features:
- 15.3kg total weight 
- Maximum extended width of up to 2550mm wide 
- Ea…

Excellent drill stand for wet core drilling. Clamped by 4 anchor bolts and very smooth core feed with rack pinoin drive. Features & Benefits • For wet core drilling • 4 Anchor bits and rack • Pinion feed mechanism • Mounting plate universal Specifications • Max Drill Diameter at 90°: 102mm • Column Height: 680mm • Collar Diameter: 53mm • Max Inclination: 45° • Space Saving Anchor Base: 320x230mm • Weight: 7.7kg

The Makita A-36712 drill stand is suitable for all power drills with a standard 43mm collar.

The Makita Cutter Blade is the right accessory for straighter, more accurate cutting in installed plasterboard. When used with the Makita 18v LXT Cordless DSD180 and SD100 drywall cutters, the B-49703 blade is ideal for cut-outs and repair applications. The blades have depth markings for easier adjustments, and will cut drywall board up to 1-3/16" thick. For longer performance life, the blades are constructed with durable High Carbon Steel (HCS). Features & Benefits • For making precision cuts in plasterboard • Depth markings on blade allow for easy adjustments • Cuts plasterboard up to 1-3/16" thick • Durable high carbon steel construction for long life • For use with …

Makita Board Wood Cutter Blade for use with DSD180 and SD100. Specifications • Length: 53mm • Thickness: 0.55mm • Width: 18mm • Pack Quantity: 2

Dust bag for Makita 9401 Belt Sander complete with fastener. Features & Benefits • Cleaner finish and less dust • Cloth bag for efficient collection • Dust Bag complete with fastener Specifications • Model: 9401, 9402 • Pack Quantity: 1

Makita 122793-0 dust bag assembly for DKP180, KP0800 and KP0810 planers. Makita planer dust bag helps create a dust free environment whilst on the job. Features & Benefits • Compatible with models DKP180, KP0800 and KP0810 • Cleaner cut and less dust • Helps create a dust free environment whilst on the job Specifications • Part Number: 122793-0 • Model: DKP180 / KP0800 / KP0810 • Pack Quantity: 1

Makita Dust Extraction Adaptor Kit for HR3520 Hammer Drill. Specifications • Model: HR3520 • Pack Quantity: 1

The Makita P-54047 Dust Suppression Water Bottle is a portable water supply tank for disc cutters, coring, drilling and sawing tools. This tank is heavy duty and is professional quality. Features & Benefits• Suitable for DPC7311, DPC641, DPC6430, EK6100 and other Makita tools • Water Tank with 3m Hose • 13.2L

Makita E-05664 Guide Rail Holder 1.4m and 1.5m The Makita E-05664 Holder is designed to safely store and transport guide rails, connectors and brackets. The universal guide rail holder - fits both 1.4m & 1.5m rails. It protects them from scratches and knocks during transportation and storage. Adjustable hook and loop straps to secure the rails. With a front pocket with zip for clamps and internal pockets to immobilise shorter guide rails. Durable but lightweight with foam lining for extra protection Strap-belt System included. Features:
- Front pocket with zip for storage
- Heavy duty zips
- Padded lining
- Water and Tear-resistant fabric
- Adjustable hook & loop straps to secure …

Makita Bevel For Makita Guide Rails. Specifications • Model: SP6000, RP2301 • Manufacturer Code: 196664-7 • Quantity: 1

Impact rated magnetic nutsetters for driving hexagonal fasteners. Suitable for use in impact drivers as well as standard jawed drill chucks. Specifications • Size: 10mm • Shank: 1/4" Hex • Length: 50mm Features & Benefits • Magnet for fastener retention • Part of the Makita Impact Black range of impact rated accessories • Suitable for impact drivers, drill drivers, combi drills etc • Will drive hex nuts or hexagon head fasteners (e.g coach screws)