Power Tool Accessories

Stanley 1-TRA705-5T 8mm Heavy Duty Staples (Pack Of 5000) The Stanley 1-TRA705-5T staples are only suitable for heavy duty staplers and hammer tackers. They can be used in stapling jobs such as insulation, carpet under laying and roofing felt. They come packaged compactly in a sturdy plastic container to reduce the risk of breakage. With color-coded packaging, you can easily identify the correct brads for the project you are working on. Features:
- Made with zinc for maximum protection against harsh weather conditions
- For heavy duty stapling
- Only suitable for heavy duty staplers and hammer tackers
- Staple size: 8mm
- Stanley staplers will take any size of staples Specification:
…

Stanley 1-TRA708T Heavy-Duty Staple 12mm ideal for insulation, carpet under laying and roofing felt The Stanley 1-TRA708T is a pack of 1000 heavy-duty staples ideal for a number of applications including insulation, carpet under laying and roofing felt. The sturdy plastic, colour coded packaging reduces staple breakage and makes them easily identifiable for intended applications. Features:
- Sturdy plastic packaging reduces staple breakage
- Colour-coded packaging makes size and product selection a cinch
- Fits TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow T-50
- For heavy-duty stapling jobs such as insulation, carpet under laying and roofing felt Specification:
- Qty: 1,…

Stanley Curved Head Staples ideal for securing telephone cable and other low voltage wire. Plastic box of 1,000 staples.Stanley Type 7 Curved Head Cable Staples, size 10mm, are made of high-quality steel, and are ideal for securing telephone cable and other low voltage wire. Specifications: Size: 10mm.Pack Quantity: 1,000 staples. Additional Information:• Size: 10mm• Pack Qty.: 1000

Stanley FatMax® Chalk Powder is specially formulated for good adhesion and high visibility. Its weather-resistant formula will not fade or bleed in a wet environment. It also prevents chalk from clumping inside the chalk reel, meaning it can still be used if soaked with water. Suitable for both interior and exterior use. It is specifically packaged in a square bottle which is designed to not roll off work surfaces.1 x Stanley FatMax® Chalk Refill Red 225g Red is suitable for external masonry work. Indelible.Additional Information:• Colour: Red• Size: 225g

Stanley FatMax® Chalk Powder is specially formulated for good adhesion and high visibility. Its weather-resistant formula will not fade or bleed in a wet environment. It also prevents chalk from clumping inside the chalk reel, meaning it can still be used if soaked with water. Suitable for both interior and exterior use. It is specifically packaged in a square bottle which is designed to not roll off work surfaces.1 x Stanley FatMax® Chalk Refill Black 225gAdditional Information:• Colour: Black• Size: 225g

Stanley 1-TRA706T Heavy-Duty Staple 10mm (1000) The Stanley 1-TRA706T is a pack of 1000 heavy-duty staples ideal for a number of applications including insulation, carpet under laying and roofing felt. The sturdy plastic packaging reduces staple breakage and colour-coded packaging makes them easily identifiable. Features:
- For heavy-duty stapling jobs such as insulation, carpet under laying and roofing felt
- Colour-coded packaging makes size and product selection a cinch
- Fits TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow T-50
- Sturdy plastic packaging reduces staple breakage Specification:
- Qty: 1,000
- Size: 10mm
- Net Weight: 0.204kg…

Stanley 1-TRA704T Heavy-Duty Staples 6mm (1000) Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4 or 11 or 140. Fits Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.Specification:
- Size: 6mm
- Qty: 1,000
- Net Weight: 0.127kg

The Stanley STST1-80117 Leather Hammer Holder equipped with a rustproof metal loop The STST1-80117 leather hammer holder from Stanley is made from high-grade suede leather with double stitching and rivets making it extremely hard-wearing and durable. This versatile product can be added onto your Stanley tool belt alongside all your other frequently used tools so you always have it to hand. It comes equipped with a rustproof metal loop that fits most hammers. Features:
- Integrated steel hammer loop
- Double-stitched for added strength
- Part of the Stanley leather tool belt range
- Made from genuine high-grade suede leather
- Highly durable reinforced with rivets on stress points …

For Stapler / Quantity 5,000 Piece

For working with plastic welding rods up to 6mm in diameter. For use with a 9mm reduction nozzle such as the Steinel 070618.

For securely welding HDPE plastics with hot air heat guns.Contents• One 100g Pack of Black HDPE Plastic Welding Rods

For securely welding rigid PVC plastics with hot air tools.Contents• One 100g Pack of rigid PVC welding rods

For securely welding PP (polypropylene) plastics with hot air heat guns.Contents• One 100g Pack of PP Plastic Welding Rods

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Specifications: • Shank Diameter: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Trend 6.35mm diameter down cut spiral cutter - 8mm shank, 25.4mm cut length. Spiral downcutting configuration offers the cleanest finish on the top surface of the workpiece when used in hand held or overhead CNC routing applications. Two flute design is ideal for superior crosscutting performance in all timbers and on veneered sheet materials. Spiral design offers clean plunge cutting with reduced vibration under load for premium finishes. 1/4in wide x 1in cut depth Imperial size for matched size to imperial sheet stock and fittings. Chips are forced downwards as the cut is made so require a lower feed speed. Ultra-durable Solid Tungsten Carbide construction for increased performance and …

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications: • Dia Metric: 30.2 • Dia Imperial: 1 3/16 • Dia2 Metric: 27.2 • Cut Length Metric: 6Features & Benefits• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

This 30mm guide bush is a popular router accessory that fixes to the router base and acts as a small ring fence The Trend GB30 is a 30mm guide bush designed to guide the router when using a template. It fits directly to the Trend T3, T4, T5, T5 MK2, T9, T10 and T11 and some other light duty routers. Features:
- This guide bush guides the router when using a template
- Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 and T11, and some other light duty routers
- Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base Specification:
- Diameter: 30mm

This thirty five piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/2- inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Supplied in aluminium carry case. Specifications: • Shank Diameter: 1/2 • Pack Qty: 35 piece Contents: 1 x Single flute 3.2mm x 12.7mm cut 1 x Straight 6.3mm x 19mm cut 1 x Straight 9.5mm x 25mm cut 1 x Straight 12.7mm x 19mm cut 1 x Straight 12.7mm x 25mm cut 1 x Straight 19mm x 19mm cut 1 x Pierce and trim 6.3x 18mm 1 x 45 Degree v groove x 12.7mm dia 2 x Dovetail 12.7mm and 14.3mm dia 2 x Cove R3.2mm & R6.35mm 1 x Long series cove R6.35mm x 18mm …

Magnetiser. Simply pull the tool along the positive side of the Wera magnetiser and the tool will hold the screw securely on the blade. To demagnetise, move the tool along the negative side. Features and Benefits: • Magnetiser • To magnetise and demagnetise tool tips • Securely holds the screw on the tool Contents: 9500 Magnetiser SB, 48 mm

Features:- Hexagon ¼´´ drive (ISO 1173 shank – E 6.3) for secure fit in drill chuck - Magnetic ¼´´ hexagonal socket for quick tool changes - Small and compact with a corner dimension of only 52 mm (including 25 mm bit) design lets you drill and screw in - The smallest of spaces - Right/left rotation for tightening and loosening - Gear with ball-bearing with smooth running Specifications:- Receptacle for screwdriver insert: 6.35 mm (¼´´) hexagon socket - Product length (depth): 153 mm- Shank version: Hexagon shank A/F 6.35 мм (¼´´) - Direction of rotation: Clockwise/anti-clockwise rotation - Torque, max.: 13 - Speed of rotation, max.: 400 RPM- Additional product specification: gear with ball-b…

Hand Tool

Features The highly accurate tooth placement delivers a smoother cut due to the teeth being better aligned and following each other precisely. Roll tensioned plates mean that vibration is significantly reduced, delivering a smoother cut. The bi-modular carbide delivers a denser stronger tooth less likely to chip, therefore lasting longer. Specification Applications - For Steel cutting Blade Diameter - 140mm Bore Size - 20mm Tooth Count - 30 Kerf Thickness - 1.49mm Plate Thickness - 1.13 mm Grind - TCG Rake Angle - +1.5 ° Standard Equipment 1x DeWALT DT1923-QZ 140 x 20 30T Steel Cordless Saw Blade KINDLY REMINDER: Delivery to the UK Highlands, Channel Islands, Northern Ireland, Isle Of Wight, …

Dewalt DT99572 Extreme Runtime Saw Blade 250mm x 30mm x 36T
The Dewalt DT99572 Extreme Runtime Circular Saw Blade is 250mm in diameter with a 30mm bore and 36 teeth. This saw blade has been specially engineered to meet the DeWalt Extreme Runtime benchmark with twice the working lifespan and performance. It has an ultra thin kerf design for smooth cuts and fine carbide tips for a long life. ATB+R tooth configuration for a quality cut and an optimised hook angle for low cutting force. The blade also has body slots for low vibration. 
Features:
- For use with XR FlexVolt range and all compatible corded and cordless circular saws, mitre saws and table saws
- Optimized for cordless with up to 2…

The P88001 Set consists of P803-P805-P807-P809-P813 carbide burrs of high quality, in shapes to offer a solution for the majority of applications in major industry. The combination of premium grade materials for both shank and head with the precise production processes results in a consistent and secure product which Dormer consider essential in the usage of carbide burrs. Features First choice for general machining Improves ease of control Increases metal removal rate Breaks swarf into small manageable pieces Aluminium Cut: First choice for non ferrous materials and plastics High helix and large flute volume for rapid metal removal Shank: Toughened and hardened steel shanks Provides rigidity …