Power Tool Accessories

Dremel saw blade for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts.SpecificationsTotal length: 100 mmCutting depth: 12 mmTeeth per cm: 6Pack of 5

Saw blade for straight and large diameter curved cuts in wooden and plastic materials. This blade has 6 teeth per centimeter ensuring a good balance between speed and precision.Technical specifications:Total length - 100 mm Cutting depth - 18 mm Teeth per centimeter - 6 Blade width - 0,4 mm Blade depth - 2,5 mm

Saw blade for detailed cuts in wooden materials. This blade has 7 teeth per centimeter ensuring the finest cutting results.Technical specifications:Total length - 100 mm Cutting depth - 12 mm Teeth per centimeter - 7 Blade width - 0,2 mm Blade depth - 1,9 mm

Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts.Technical specifications:Total length - 100 mm Cutting depth - 3 mm Teeth per centimeter - 10 Blade width - 0,2 mm Blade depth - 1,9 mm

To be used with Dremel glue gun model 940 (195°). Glues a variety of materials, such as wood, plastics, ceramics, carton, textile, etc.SpecificationsLength: 100 mm Diameter: 11 mm Operating temperature: 165-195 °CPack of 12

To be used on Dremel model 910 and 930 (high-temperature). Glues a variety of materials, such as wood, plastics, ceramics, textile, etc.SpecificationsLength: 100 mm Diameter: 7 mm Operating temperature: 165-195 °CPack of 12

To be used on Dremel model 920 (105°) and 930 (low-temperature - 165°). Glues a variety of heat sensitive materials, such as paper, carton, delicate textile, etc.SpecificationsLength: 100 mm Diameter: 7 mm Operating temperature: 105-140 °CPack of 12

To be used with Dremel glue gun model 940 (195 °C). To glue wooden materials.SpecificationsLength: 100 mm Diameter: 11 mm Operating temperature: 165-195 °CPack of 12

To be used with Dremel glue gun model 910 (165 °C). To glue wooden materials.SpecificationsLength: 100 mm Diameter: 7 mm Operating temperature: 165-195 °CPack of 12

Part of the KWB by Einhell accessory range, this cutting and sanding kit is compatible with oscillating multi tools from Einhell, and will also be suitable for many oscillating tools from other manufacturers too. The set contains a round saw blade and three plunge-cut blades, along with a sanding pad and 12 sanding sheets. Features and Benefits • Cutting and sanding accessory kit for oscillating multi tools • Suitable for Einhell oscillating multi tools • Will also work with many tools from other manufacturers • Four saw blades • Sanding pad with 12 piece set of sanding sheets

The Einhell "M" Case measures 175mm x 108mm x 45mm and uses interchangeable inserts which allows the user to add or remove accessories if required. The robust locking clip closure helps to keep contents secure while being transported between jobs, and the transparent lid enables quick identification of the contents when you're searching for the right accessory. This screwdriver bit set contains Phillips, Pozi, Hex and Torx bits in an extended length of 90mm which makes them able to reach recessed or awkwardly positioned fasteners. This is especially handy in automotive and assembly work, repairs, maintenance and electrical installations. Features & Benefits • Extra long (90mm) screwdriver …

The Einhell "S" Case measures 175mm x 80mm x 35mm and uses interchangeable inserts which allows the user to add or remove accessories if required. The robust locking clip closure helps to keep contents secure while being transported between jobs, and the transparent lid enables quick identification of the contents when you're searching for the right accessory. This 18 piece accessory set contains 10 impact rated screwdriver bits in 25mm and 50mm lengths, 3 impact rated nut drivers, a screwdriver bit holder, and 4 hex shank drill bits made from high strength HSS 4241 steel. Features & Benefits • Impact rated screwdriver bit set • Three impact rated nut drivers for hexagonal fasteners …

Packaged in an Einhell XS case, this micro tool kit includes a 1/4" ratchet driver, screwdriver bit holder, 13 screwdriver bits and 5 sockets. Ideal for tackling small repair and construction jobs around the home, the case is also small enough for convenient transport in a rucksack, saddblebag or glovebox, or stored in a tool belt or tool pouch. The Einhell "XS" case measures 108mm x 75mm x 35mm. It has a transparent lid for quick and easy verification of the contents inside, and is fastened with a secure locking clip. Features & Benefits • Compact socket and screwdriver bit set • Ratchet with 1/4" square drive for sockets • Includes 1/4" square drive to 1/4" hex adaptor for screwdriver …

The Einhell "S" Case measures 175mm x 80mm x 35mm and uses interchangeable inserts which allows the user to add or remove accessories if required. The robust locking clip closure helps to keep contents secure while being transported between jobs, and the transparent lid enables quick identification of the contents when you're searching for the right accessory. This impact rated bit set is suitable for use with impact drivers as well as standard drill drivers and similar tools. It includes 25mm and 50mm length screwdriver bits, a screwdriver bit holder and three impact nut drivers. All bits are made of robust S2 steel, which ensures their durability even under high loads. The additional manganese …

This complete Einhell 254mm polishing set contains a textile and synthetic bonnet: first, the polishing agent is applied to the paint surface with the textile polishing bonnet. Then the synthetic polishing bonnet is used to produce a long-lasting shine. Suitable for use with the Einhell CE-CB 18/254 Li 18v Cordless Car Buffer/Polisher, and with other similar machines. Specifications • Diameter: 254mm • Material: Textile, Synthetic Features and Benefits • Set of two polishing bonnets • Includes one textile bonnet and one synthetic bonnet • Suitable for 254mm polishing and buffing machines Contents • 254mm Textile Polishing Bonnet • 254mm Synthetic Polishing …

This screwdriver bit set comes packaged in an Einhell "XS" case and contains all the common sizes of Phillips, Pozi, Slotted, Hex, Torx and Security Torx screwdriver bits in 25mm length. Additionally the set includes a locking screwdriver bit holder and a socket adaptor for 1/4" square drive sockets. The case has a transparent lid and a secure locking clip to keep it closed while in transit. Features & Benefits • Includes locking bit holder and 1/4" square drive adaptor • Suitable for Phillips, Pozi, Slotted, Hex, Torx and Security Torx screws • Duplicates of the common sizes (PH2/PZ2) Contents • PH1 Phillips Screwdriver Bit 25mm • PH2 Phillips Screwdriver Bit 25mm …

The Einhell "M" Case measures 175mm x 108mm x 45mm and uses interchangeable inserts which allows the user to add or remove accessories if required. This accessory set includes 32 screwdriver bits with a length of 50mm, including several less common Tri Wing, Torq Set and Spanner screwdriver bits. Additionally the set includes a locking quick change screwdriver bit holder. Contents • TT8 Security Torx Screwdriver Bit 50mm • TT10 Security Torx Screwdriver Bit 50mm • TT15 Security Torx Screwdriver Bit 50mm • TT20 Security Torx Screwdriver Bit 50mm • TT25 Security Torx Screwdriver Bit 50mm • TT27 Security Torx Screwdriver Bit 50mm • TT30 Security Torx Screwdriver …

Three place blade set for mini circular saws. The set includes two blades for cutting wood and wood-based materials as well as a diamond blade for cutting tiles. Specifications • Blade Diameter: 89mm • Blade Bore: 10mm Contents • 89mm Diamond Blade • 89mm HSS Blade • 89mm HM Blade

Saw Blade Set / Wood / Quantity 3 Piece

The Einhell "M" Case measures 175mm x 108mm x 45mm and uses interchangeable inserts which allows the user to add or remove accessories if required. The robust locking clip closure helps to keep contents secure while being transported between jobs, and the transparent lid enables quick identification of the contents when you're searching for the right accessory. This 42 piece screwdriver bit set includes Phillips, Pozi and Torx types, covering common screw types found in domestic environments. Two nut driver sockets (8mm and 10mm) are included, along with a screw guide bit holder and a locking bit holder. Features & Benefits • Includes 25mm and 50mm length screwdriver bits • Two nut …

Part of the KWB by Einhell accessory range, these professional grade jigsaw blades are made in Germany and have been designed to reduce the demand on the motor during use, meaning that runtime can be extended when used in a cordless jigsaw. The set contains a universal BIM blade, two blades for wood and laminates, and a blade for wood and plastics. T shank fitting: compatible with all Einhell jigsaws, and with most new jigsaws on the market. Features and Benefits • Part of the KWB by Einhell accessory range • Professional grade jigsaw blades • Energy saving design helps to save battery power when used in a cordless saw Specifications • Shank: T-Shank Contents • 6235 …

Five piece scroll saw blade set for cutting wood. Specifications • Einhell Partcode: 49316350 • Blade Length: 127mm • Pack Quantity: 5 Contents • Size 1 (fine) Blade (x1) • Size 3 (medium) Blades (x2) • Size 4 (medium-rough) Blade (x1) • Size 11 (rough) Blade (x1)

This 95 piece XL accesory set from Einhell covers a huge range of drilling and driving applications thanks to its extensive selection of drill bits, impact rated screwdriver bits and sockets. Suitable for working in masonry, wood and metal, the XL case keeps everything organised and has a secure auto-lock clip closure to ensure everything stays in position while being transported between jobs. Features & Benefits • Contains 57 impact rated screwdriver bits in 25mm and 50mm lengths • Hex shank HSS 4241 steel drill bits • Hex shank wood drill bits • Hex shank flat wood drill bits • Nut drivers in metric sizes • Four drill stops and fixing screw: allows drilling to …

Grinding wheel for bench grinders. Includes 12.7mm reduction ring. Specifications • Einhell Partcode: 49507435 • Wheel Diameter: 150mm • Bore: 32mm • Wheel Thickness: 16mm • Grit: 36