Other Hand Tools

A set of popular keys for draining differentials, sumps, axles and gearboxes on most modern vehicles. A set of popular keys for draining differentials, sumps, axles and gearboxes on most modern vehicles.Includes 10mm (F) square and 10mm triangular in 3/8"D.Hex 8 | 9 | 10 | 12 | 14 | 17mm.Square 7 | 8 | 11 | 13 metric and 5/16" | 3/8" imperial.Supplied in a blow mould case.

These oil filter wrenches are suitable for canister filters and withstand up to 85ft lbs of torque. Set includes 3/8"D adaptor and 14 wrenches for a variety of vehicles. Vehicles include AC, BMW, Daihatsu, Fiat, Ford, Honda, Isuzu, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Porsche, Renault, Subaru, Toyota, Vauxhall/Opel, Volkswagen and most other vehicles with Fram or Motocraft filters.These oil filter wrenches are suitable for canister filters.Withstands 85ft lbs torque.Set includes 3/8"D adaptor and 14 wrenches for a variety of vehicles.Vehicles include AC, BMW, Daihatsu, Fiat, Ford, Honda, Isuzu, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Porsche, Renault, Subaru, Toyota, Vauxhall/Opel, Volkswagen …

Oil Filter Wrench / Tool Steel

Tensioner Wrench / Tool Steel

This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines.For 1.0 12v X10XE and 1.2 16v X12XE enginesAgila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-BWith X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codesChain driven engines1993-2010

Long reach compression test adaptor for deep seated spark plug holes in V6 and 16 valve engines such as Vauxhall/Opel Ecotec and Ford Zetec.For deep seated spark plug ports.For V6 and 16 valve engines.Suitable for Vauxhall/Opel Ecotec and Ford Zetec.235mm overall length.Designed to fit in a head with a 14mm thread.

An aluminium oil filter wrench in 1/2"Drive. Aluminium oil filter wrench.74mm x 14 flutes.Suitable for Purflux | Grove filters fitted to: Audi | Volkswagen | BMW | Citron | Peugeot | Ford | Fiat | Lancia | Mazda | Mercedes-Benz | Nissan | Vauxhall/Opel | Porsche | Renault | Suzuki | Toyota.1/2"D.Removes oil filter without damage to the filter housing.

Oil Filter Wrench / Aluminium

This kit includes the pneumatic rewind tool (which is also available separately - Part No. 3993) and can be used on left and right hand threaded pistons. Adaptors for the most modern vehicles are included. The pneumatic tool is suitable for all adaptors with either pin type drives or 3/8"D.Pneumatic rewind tool for use with an air gun.Fixed 2 pin drive or 3/8"D.Pneumatic rewind tool for left and right hand threaded pistons.Complete with 15 adaptors.Time saving. Piston seal Part No. 2280.

For left and right hand threaded pistons. Suitable for most 3/8"D wind-back adaptors and pin type adaptors.A pneumatic/air tool for brake caliper piston rewind.Suitable for pin drive or 3/8"D.For left and right handed threaded pistons.Time saver.Full adaptor range available. Supplied with a 3/8"D to 2 pin magnetic adaptor to fit adaptors in 3991.

This kit brings together three of the most useful tensioner locking pins in one kit. These pins are used to lock serpentine belts and cambelts fitted to many of the VAG engines.Set of 3 locking pins for holding the tension on the cambelt and serpentine (auxiliary) belts on VAG enginesOEM Nos. T10115, T40011 - timing belt tension pins and T10060/A - serpentine tension pinUse on tensioners fitted to 1.4/1.9/2.5 TDI PD/TFSIPetrol or dieselPopular tools

This timing tool kit is specifically designed for Fiat chain driven engines fitted to the Vauxhall/Opel | Saab 1.3 CDTi and 1.9 CDTi belt driven models.1.9 CDTi belt driven engines fitted to Saab 9-3 (2004-2009) and 905 (2003-2020). Saab engine codes Z19DT | Z19DTH1.9 CDTi belt driven engines fitted to Astra-H, Vectra-C, Signum, Zafira-B with Z19DT and Z19DTL engines1.3 CDTi chain driven engines fitted to Agila, Corsa-C, Combo-C, Astra-H, Tigra-B, Meriva with Z13DT, Z13DTH, Z13DTJ enginesSupplied in foam tray to ensure all tools are removed from engine after use. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide …

A cup type oil filter wrench 86mm with 18 flutes suitable for Alfa Romeo, Volkswagen, Ferrari, Fiat, Seat, Renault and Mercedes-Benz.A cup type oil filter wrench.For Alfa Romeo (petrol and diesel), Fiat, Seat, Renault, Mercedes-Benz and Volkswagen.86mm x 18 flutes.3/8" drive.Also fits Ferrari 348/355/360 where Ferrari Filter Purflux 197654 is used.

Tensioner Pulley Wrench 32mm for adjusting the Cambelt tensioning pulley on Audi and Volkswagen 2.5 TDi /Sdi engines32mmFor adjusting the cam belt tensioning pulleySuitable for Audi and Volkswagen 2.5 TDI engines and some VolvosOEM 3355Specialist tool

Tensioner Wrench / Tool Steel

Cup style oil filter wrench specifically designed for Mercedes-Benz V6 & V8 Cdi engine with engine code 642-920.Cup style oil filter wrench specifically designed for Mercedes-Benz. Also suitable for Chrysler 300c 3litre diesel 2006

This simple tensioner cover extends the use of Part No 4068 to include later F9Q engine codesCovers many models including:- Kangoo / Clio II / Megane II / Scenic I / Laguna / Laguna I / Espace III / Espace IV, Avantime, Trafic II, Master IIOEM MOT 1705Use in conjunction with Part No 4068F9Q engine codesTime saver

This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles. The tool works with an air compressor at 4-7 bar and on a maximum diameter of 110mm. Full instructions are supplied and a video clip is featured on our website with the compliments of Youtube.Designed for stretching flexible CV boots on to the drive shaft assemblies of automotive vehicles.For use with an air compressor.Works at 4-8 bar and on a maximum diameter of 115mm.Full instructions supplied.Video demonstration available on YouTube and our website.

This robust Slide Hammer with 5/8" UNF thread and 10lb of force can be used with a variety of tools and for many applications including the removal of stubborn diesel injectors etc. Useful with Laser's Diesel Injector Set (Part No 4760).Robust slide hammer.5/8 UNF thread.10lb Hammer.Can be used with a variety of tools including the removal of diesel injectors.Useful with Laser's Diesel Injector Adaptor Set - Part No 4760.

Oil Filter Wrench / Aluminium

A comprehensive set of Hub Nut sockets designed primarily for Volkswagen Audi Group vehicles. The set, supplied in a handy tin, comprises of 24mm | 30mm | 32mm impact sockets and 14mm | 17mm Impact Hex Keys. All are in 1/2"D and manufactured from high quality Chrome MolybdenumComprehensive 5 piece hub nut socket set designed for Volkswagen Audi Group Vehicles.1/2"Drive sockets.24 | 30 | 32mm impact sockets.14 | 17mm impact Hex key.Manufactured from high quality Chrome Molybdenum.

This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models. 76mm longManufactured from Chrome MolybdenumImpact quality.Correctly hardened.For use on rear wheel bearing assemblies on Golf/Jetta and other MK4 Chassis vehicles.

A crankshaft turning tool for Ducati motorcycles has now been added to the Motorcycle tool range.Applications: Ducati Monster | Multistrada 600 | 620 | 748 | 750 | 800 | 848 | 851 | 888 | 900 | 916 | 996 | 998 | 999 | 1000 | 1098 | 1198.Engines built from 1990 - present.Engine Sizes: 750 | 900 | 916cc.Invaluable for turning the engine while setting the valve clearances.Time Saver.

A specifically designed oil filter wrench for Renault, Peugeot, Ford and Seat.80mm x 14 flutes.For removing canister oil filters.Application: Renault | Peugeot | Seat | Ford.Essential tool.3/8"D.