Insulation pullers

Not only suitable for oil changes, this zinc plated pan is ideal for cleaning and storing vehicle components. May also be used as a drip tray under vehicles. Features & Benefits: • Zinc plated pan, ideal for oil changes, cleaning and storing vehicle components. • May also be used as a drip tray under vehicles. • Capacity: 9L. • Overall Size (W x D x H): 432 x 331 x 89mm. • Model No. DRPM1 Specifications: Model No DRPM1 Brand: Sealey Capacity: 9L Nett Weight: 1.05kg Size (W x D x H): 432 x 331 x 89mm

Not only suitable for oil changes, this zinc plated pan is ideal for cleaning and storing vehicle components. May also be used as a drip tray under vehicles. Features & Benefits: • Zinc plated pan, ideal for oil changes, cleaning and storing vehicle components. • May also be used as a drip tray under vehicles. • Capacity: 16L. • Overall Size (W x D x H): 432 x 331 x 143mm. • Model No. DRPM3 Specifications: Model No DRPM3 Brand: Sealey Capacity: 16L Nett Weight: 1.24kg Size (W x D x H): 432 x 331 x 143mm

Satin finished carbon steel body with 1/2"Sq drive for use with ratchet wrenches. Heavy-duty thin double chain.

Cast puller yoke with forged separator. Supplied with 10tonne hydraulic ram. Suitable for pulling commercial vehicle size bearings from 120-150mm. Hydraulic ram interchangeable with other sets in the range. Maximum depth 420mm. Supplied in steel case.

High quality, European made, 1600kg coil spring compressor kit. Supplied with two pairs of drop-forged safety yokes, with polyurethane inserts for improved grip. Yokes are carefully shaped to prevent coil spring from bowing. Features Safety restraint wire as a precaution, in the unlikely event of a spring slipping. Features & Benefits: • 1600kg Maximum jaw loading. • Supplied with two pairs of drop-forged safety yokes, with polyurethane inserts for improved grip. • Yokes are carefully shaped to prevent coil spring from bowing. • Features safety restraint wire as a precaution, in the unlikely event of a spring slipping. • Model No. RE225 Specifications: Model No RE225 Brand: Sealey Nett Weigh…

Designed for the removal of trim clips found on most vehicles. Comprises long and short reach steel shafts with clawed heads. Contoured and textured comfort grip handles.Specifications:Model No RT06Brand: SealeyContents: Short; 240mm (x3), Long; 495mm (x3)Nett Weight: 1.20kg

Wheel Wrench

Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness. Features & Benefits: • Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. • Windows and slots enable sockets to be fitted over wiring harness. • Model No. SX032 Specifications: Model No SX032 Brand: Sealey Contents: 3/8"Sq Drive; 22mm(7/8") Offset Oxygen Sensor Socket - 30mm, 3/8"Sq/1” Wrench Drive; 22mm(7/8") Wide Slot Oxygen Sensor Socket - 90mm, Narrow Slot Vacuum Sensor Socket - 80mm, 3/8"Sq Drive/1-1/8" Wrench; 27mm(1-1/16") Oil Sender Unit Socket - 74mm, 1/2"Sq Drive; 27mm(1-1/16") Injector Socket - 85mm, 29mm Ox…

Tyre Pressure Gauge / Plastic

Tyre Pressure Gauge

Necessary for pre-tensioning self-adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool, allowing the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors. Supplied in storage case. Features & Benefits: • Necessary for pre-tensioning self-adjusting clutches before removal or installation. • Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. • Features a refitting tool, allowing the clutch adjuster to be wound back. • Also includes a selection of clutch plate and spigot alignment adaptors…

One-person pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir means reduced risk of running the system dry during bleeding process or complete fluid change. Suitable for use on ABS systems. Features a long delivery hose for operation with a low level ramp, and long reach handle for easy mobility. Supplied with a range of European, Japanese and US vehicle adaptors. Compatible with DOT 3.0, 4.0, 4.0LV and 5.1 Poly-Glycol based brake fluids. NOT compatible with DOT 5.0 Silicone based brake fluid. Features & Benefits: • One-person pressure brake and cl…

Patented design maintains the fluid level in the vehicle's brake or clutch fluid reservoir during the bleeding process. No electricity or compressor required, ideal for use on a vehicle lift. Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. Fast, simple-to-use and features on/off flow valve. Features & Benefits: • Patented design maintains the fluid level in the vehicle's brake or clutch fluid reservoir during the bleeding process. • No electricity or compressor required, ideal for use on a vehicle lift. • Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. • Fast, si…

The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines. Supplied in storage case with preformed liner and foam filled lid.

The right size drain plug key always in your hand. Eight popular sizes covered in one tool. Suitable for drain plugs on engine, gearbox and rear axle. Features & Benefits: • The right size drain plug key always in your hand. • Eight popular sizes covered in one tool. • Sizes: Hex; 10, 12, 14, 17mm, Square; 3/8", 1/2", 8, 10mm. • Suitable for drain plugs on engine, gearbox and back axle. • Lifetime guarantee*. • Model No. VS650

Cap type filter wrenches, made from 7 and 16 gauge steel will withstand up to 115Nm (85lb.ft) of torque. Designed to grip like sockets, thereby minimising the possibility of crushing filters. Electro-black oxide finish for rust protection. Use with 3/8" or 1/2"Sq drive wrenches. Supplied in storage case.

Extensive set designed for a wide range of vehicles. Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm(85lb.ft) of torque. Designed to grip like sockets, thereby minimising the possibility of crushed filters. Includes adjustable oil filter wrench. Adaptor allows use with 3/8" or 1/2"Sq drive wrenches. Supplied in storage case.

Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm (85lb.ft) of torque. Low profile design suitable for use in confined areas.

Hydraulic hand pump unit powers 1000kg capacity ram and yoke assembly. Up to 50% faster than using other ratchet driven spring compressors. Equipped with two pairs of spring yokes with rubberised covers to prevent slippage and damage to springs. Suitable for springs from Ø80mm ID to Ø165mm OD. Features & Benefits: • Hydraulic hand pump unit powers 1000kg capacity ram and yoke assembly. • Up to 50% quicker than using other ratchet driven spring compressors. • Equipped with two pairs of spring yokes with plasticized covers to prevent slippage and damage to springs. • Suitable for springs from Ø80mm ID to Ø165mm OD. • Model No. VS7011

Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.

Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.

Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.

Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.

Suitable for a wide range of vehicles including some light commercial. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment. Features & Benefits: • Suitable for a wide range of vehicles including some light commercial. • Screw action provides fast adjustment for required hub diameter. • Eight interchangeable spigot adaptors aid close alignment. • Model No. VS711