Other Hand Tools

A handy tool that can be used for pointing or cementing in small-scale brickwork. It can also be used by plasterers for fine finishing of decorative plasterwork, or as an archaeologist's digging tool.It is flexible yet strong and made from one piece of pressed steel for strength and durability. Features: For fine finishing of decorative plasterwork Can be used as an archaeologist's digging tool Can be used as an archaeologist's digging tool Flexible, yet strong Specifications: Dimensions: H:6.3 x W:1.3 x D:34.0 cm Colour: Silver Guarantee:5 years Material: Metal Model Number: FAITSQURE12

The Faithfull Pocket Scriber comes with a hardened, reversible tungsten carbide steel point for scribing and scoring metal surfaces. A permanent magnet placed on the opposite end is for picking up small parts, steel chips etc. Specification: Length: 150mm (6in). Additional Information:• Scribe Type: Pocket• Size (mm): 150

Faithfull Twisted Nylon Chalk Lines are ideal for most applications in the building trade and can be used as chalk or brick lines.Used with coloured powdered chalk to mark between two points to give a straight line. Twisted nylon line is cheaper than braided. To stop the line fraying at the end hold over a lighted match for a few seconds to melt and weld the ends together. Length: 36 metresAdditional Information:• Line Type: Chalk Line• Line Length (m): 36• Pack Qty.: 1

The Faithfull Crutch Pattern Stopcock Key also has additional 1/2 and 3/4 in square valve fittings. Turning handle has one pointed end for lifting covers. Length 114cm (44.3/4in).Additional Information:• Shape: Crutch• Length (mm): 1140

Popular with both industrial and DIY users, Wire Scratch Brushes are used for removing rust, corrosion, paint and primer and for generally producing a clean surface. These Faithfull Wire Brushes have unique curved profiles and narrow faces, making them ideal for accessing hard-to-reach places. The high density wire fill and contoured plastic handle allow users to apply a higher pressure than that of a conventional wire brush. Fitted with colour coded handles with hanging slots.The FAIWBHANDS Wire Scratch Brush has the following specification: Handle colour: Red. Wire: Steel.Additional Information:• Type: Scratch Brush• Wire: Steel

Faithfull range of quality scratch brushes, manufactured using a heavy-duty plastic handle with a soft grip coating. The ergonomically designed handles are comfortable to use and provide good clearance for the hand from the work surface. Each brush has a high density bristle content at both ends where the most force is focused when in use, for a better performance and longer working life. Brushes are available in 4 types, carbon steel, stainless steel, brass and plastic. Each brush has 4 x 16 rows of bristles.Steel, ideal for general use for removing rust, scale and old paint work.Additional Information:• Type: Scratch Brush• Wire: Steel

Popular with both industrial and DIY users, Wire Scratch Brushes are used for removing rust, corrosion, paint and primer and for generally producing a clean surface. These Faithfull Wire Brushes have unique curved profiles and narrow faces, making them ideal for accessing hard-to-reach places. The high density wire fill and contoured plastic handle allow users to apply a higher pressure than that of a conventional wire brush. Fitted with colour coded handles with hanging slots.The FAIWBHANDB Wire Scratch Brush has the following specification: Handle colour: Yellow. Wire: Brass.Additional Information:• Type: Scratch Brush• Wire: Brass

This Faithfull Combination Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by means of the screwslide.

This Faithfull Cutting Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Primarily used for scoring across the grain but can be used for cutting small strips of veneer. The re-sharpenable cutter is held securely in place by a solid brass wedge.

This Faithfull Earth Rammer has a 125mm² (5in²) square head and is attached to a wooden handle. Used for compacting areas of tarmac or asphalt, or for tamping down backfill during the erection of fence posts.Additional Information:• Tool Type: Earth Rammer

This Faithfull Marking Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used to mark parallel lines either with or across the grain.Additional Information:• Material: Hardwood• Thumbscrew Material: Brass

This Faithfull Mortice Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by means of the pullslide.

Fencing Pliers are ideally suited for fencing and wirework. These versatile pliers perform the following functions: nail extraction, nail driving, staple extraction, wire cutting, wire pulling and wire squeezing. Manufactured from chrome vanadium steel with a rustproof, satin nickel finish and fitted with cushion grip sleeves for user comfort. Features: Rustproof, satin nickel finish Non-slip handles Non-slip handles For fencing and wirework Specifications: Dimensions: H:33.8 x W:3.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Chrome Vanadium Steel Model Number: FAIPLF10N

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.

Faithfull Flat Bits produce a clean cut at a fast and efficient rate. They will bore all types of timber and will perform just as well with, or against the grain. These bits are also suitable for cutting MDF, plastics and plasterboard. The whole bit is forged from one piece of carbon steel and is heat-treated for extra strength and durability. All sizes feature a non-slip 1/4in hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. All sizes, except for the 6mm and 8mm flat bits, have a grooved tip and extended spurs to produce a clean cutting area, and faster boring speed.