Other Hand Tools

• Necessary for pre-tensioning self-adjusting clutches before removal or installation.• Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.• Features a refitting tool, allowing the clutch adjuster to be wound back.• Also includes a selection of clutch plate and spigot alignment adaptors.• Clutch Plate Adaptors: 17.9, 18.9, 19.9, 20.9, 21.9, 22.9, 23, 25.9, 27.9, 31.9, 33.9mm.• Spigot Adaptors: 13.9, 14.9, 15.9, 16.9, 17.9, 18.9, 19.9, 20.9, 21.9mm.• Assembly Flywheel Threads: ø6 x 1, ø7x 1, ø8 x1.25mm.• Supplied in storage case.Necessary for pre-tensioning self-adjusting clutches before removal or installation. Prevents plate distortion which…

• Large, ø70mm, 70bar(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and an extensive range of glow plug and injector adaptors.• Kit covers the vast majority of car, van, truck, bus, agricultural and marine diesel engines.• Supplied in storage case with preformed liner and foam filled lid.• Made in UK.The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines. Supplied in storage case with preformed liner and foam filled lid.• Large, ø70mm, 70bar(1000psi) gauge with rubber bumper, straight and right angled quick connect fittings and an extensive …

• The right size drain plug key always in your hand.• Eight popular sizes covered in one tool.• Sizes: Hex; 10, 12, 14, 17mm, Square; 3/8", 1/2", 8, 10mm.• Suitable for drain plugs on engine, gearbox and back axle.• Lifetime guarantee*.The right size drain plug key always in your hand. Eight popular sizes covered in one tool. Suitable for drain plugs on engine, gearbox and rear axle.• The right size drain plug key always in your hand. • Eight popular sizes covered in one tool. • Sizes: Hex; 10, 12, 14, 17mm, Square; 3/8", 1/2", 8, 10mm. • Suitable for drain plugs on engine, gearbox and back axle. • Lifetime guarantee*. • Model No. VS650Technical Specification:Nett Weight: 0.64kgSizes: Hex; 10, …

• Extensive set designed for a wide range of vehicles.• Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm(85lb.ft) of torque.• Designed to grip like sockets, thereby minimising the possibility of crushed filters.• Includes adjustable oil filter wrench ø65-120mm.• Adaptor allows use with 3/8" or 1/2"Sq drive wrenches.• Supplied in storage case.Extensive set designed for a wide range of vehicles. Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm(85lb.ft) of torque. Designed to grip like sockets, thereby minimising the possibility of crushed filters. Includes adjustable oil filter wrench. Adaptor allows use with 3/8" or 1/2"…

• Cap type filter wrenches prevent damage to filter housing and will withstand up to 115Nm (85lb.ft) of torque.• Low profile design suitable for use in confined areas.• Applications: VAG.Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm (85lb.ft) of torque. Low profile design suitable for use in confined areas.• Cap type filter wrench prevents damage to filter housing. • Will withstand up to 115Nm (85lb.ft) of torque. • Low profile design suitable for use in confined areas. • Applications: VAG. • Model No. VS7006.V2-24Technical Specification:Application(s): VAGDrive: 3/8"SqFlutes: 18Nett Weight: 0.15kgSize: 96mmDimensions: Length: 39mm x Height: 174mmWei…

• Hydraulic hand pump unit powers 1000kg capacity ram and yoke assembly.• Up to 50% quicker than using other ratchet driven spring compressors.• Equipped with two pairs of spring yokes with plasticized covers to prevent slippage and damage to springs.• Suitable for springs from 80mm ID to 165mm OD.Hydraulic hand pump unit powers 1000kg capacity ram and yoke assembly. Up to 50% faster than using other ratchet driven spring compressors. Equipped with two pairs of spring yokes with rubberised covers to prevent slippage and damage to springs. Suitable for springs from 80mm ID to 165mm OD.• Hydraulic hand pump unit powers 1tonne capacity ram and yoke assembly. • Up to 50% quicker than using other …

• Cap type oil filter wrench.• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.• Aluminium alloy material minimizes risk of damage to filter housing.Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimizes risk of damage to filter housing. • Model No. VS7111Technical Specification:Application(s): ToyotaDrive: 3/8"SqFlutes: 14Nett Weight: 0.17kgSize: ø64.5mmDimensions:…

• Cap type oil filter wrench.• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.• Aluminium alloy material minimizes risk of damage to filter housing.Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimizes risk of damage to filter housing. • Model No. VS7112Technical Specification:Application(s): Lexus/ToyotaDrive: 3/8"SqFlutes: 14Nett Weight: 0.19kgSize: ø64.5mmDi…

• Cap type oil filter wrench.• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.• Aluminium alloy material minimizes risk of damage to filter housing.Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimizes risk of damage to filter housing. • Model No. VS7113Technical Specification:Application(s): MercedesDrive: 3/8"SqFlutes: 14Nett Weight: 0.13kgSize: ø74.5mmDimensions:…

• Cap type oil filter wrench.• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.• Aluminium alloy material minimizes risk of damage to filter housing.Cap type oil filter wrench. Crowned tops provide extra leverage points for removing stubborn oil filter housing caps. Aluminium alloy material minimizes risk of damage to filter housing.• Cap type oil filter wrench. • Crowned top provides extra leverage points for removing stubborn oil filter housing caps. • Aluminium alloy material minimizes risk of damage to filter housing. • Model No. VS7114Technical Specification:Application(s): VolvoDrive: 1/2"SqFlutes: 16Nett Weight: 0.25kgSize: ø87mmDimensions: Length: 105mm …

• Suitable for a wide range of vehicles including some light commercial.• Screw action provides fast adjustment for required hub diameter.• Eight interchangeable spigot adaptors aid close alignment.Suitable for a wide range of vehicles including some light commercial. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.• Suitable for a wide range of vehicles including some light commercial. • Screw action provides fast adjustment for required hub diameter. • Eight interchangeable spigot adaptors aid close alignment. • Model No. VS711Technical Specification:Mandrel: ø15-19, 20-26.6, 23-36mmNett Weight: 1.38kgSpigot Ada…

• Updated set of specialist tools for the safe, fast, authorised removal of fitted radios.• Applications: Audi, Becker, New Blaupunkt, BMW, Fiat, Ford, Grundig Mercedes, Opel, Porsche, Skoda, VW.• Supplied in wallet.Updated set of specialist tools for the safe, fast, authorised removal of fitted radios. Supplied in wallet.• Updated set of specialist tools for the safe, fast authorised removal of fitted radios. • Applications: Audi, Becker, New Blaupunkt, BMW, Fiat, Ford, Grundig Mercedes, Opel, Porsche, Skoda, VW. • Supplied in wallet. • Model No. VS8041Technical Specification:Application(s): Alfa, Alpine, Audi, Becker, BMW, Citroen, Clarion, Fiat, Ford, Grundig, JVC, Mercedes, New Blaupunkt…

• Steel chain wrench with 180º pivoting handle suitable for filters with limited access.• Heavy-duty chain with spring locking mechanism for added security.Steel chain wrench with 180º pivoting handle suitable for filters with limited access. Heavy-duty chain with spring locking mechanism for added security.• Steel chain wrench with 180º pivoting handle suitable for filters with limited access. • Heavy-duty chain with spring locking mechanism for added security. • Model No. VS936Technical Specification:Capacity: ø60-105mmNett Weight: 0.73kgDimensions: Length: 45mm x Height: 335mmWeight: 0.802KgWarranty: 1 year

• ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector.• Suitable for testing cars and light commercial vehicles with direct or indirect injection.• Pressure relief valve allows repeated on-vehicle tests.• Includes 90° coupling adaptor for limited access applications.• Supplied in storage case.ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector. Suitable for testing cars and light commercial vehicles with direct or indirect injection. Pressure relief valve allows repeated on-vehicle tests. Includes 90° coupling adaptor for limited access applications. Supplied in storage case.• ø60mm Gauge with heavy-duty rubber bumper, 400m…

• Suitable for the VAG 2.5 V6 diesel engines first introduced in 1997.• Includes front end support guides, crankshaft locking pin, camshaft setting plates, injection pump locking pin, tensioner socket and tensioner locking pin.Suitable for the VAG 2.5 V6 diesel engines first introduced in 1997. Includes front end support guides, crankshaft locking pin, camshaft setting plates, injection pump locking pin, tensioner socket and tensioner locking pin.• Suitable for the VAG 2.5 V6 diesel engines first introduced in 1997. • Includes front end support guides, crankshaft locking pin, camshaft setting plates, injection pump locking pin, tensioner socket and tensioner locking pin. • Model No. VSE2351Te…

This kit contains the timing tools required to cover the belt replacement procedure for both the early and later variants of these engines. The kit includes piston positioning, camshaft and crankshaft locking tools, plus tensioner adjuster and VVT sprocket locking tool.Model No:VSE2511AOEM Tools:1.860.985.000, 1.860.987.000, 1.860.992.000, 2.000.004.500, 2.000.015.800Applications:Alfa Romeo:Giulietta (10-12), MiTo (08-12)Fiat:500 (07-15), Bravo (07-12), Brava/Bravo (98-02), Grande Punto (07-10), Grande Punto Abarth (07-10), Idea (04-12), Linea (07-10), Marea/Weekend (98-00), Palio Weekend (01-06), Panda (07-11), Punto (97-08), Stilo (01-08)Lancia:Delta (08-12), Musa (04-13), Ypsilon (96-11)Engine …

• Suitable for setting and locking popular BMW petrol engines.• Kit comprises camshaft locking tools and flywheel locking pin.Suitable for setting and locking popular BMW petrol engines. Kit comprises camshaft locking tools and flywheel locking pin.• Suitable for setting and locking popular BMW petrol engines. • Kit comprises camshaft locking tools and flywheel locking pin. • Model No. VSE4425Technical Specification:Applications: BMW 3 Series: 318iS E36 (92-99), 318ti Compact E36 (94-01), 320i E36/E46 (92-07), 323i E36/E46 (95-01), 325i E36/E46 (92-07), 328i E36/E46 (95-01), 330i E46 (00-07)BMW 5 Series: 520i E39/E60 (96-05), 523i E39 (96-01), 525i E39/E60 (00-05), 528i E39 (96-00), 530i E39/…

Essential tool for timing chain work on Mercedes 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0D CDi diesel engines. The link separating tool and the link assembly tool allow for quick and easy separation and assembly of the timing chain. May also be used on some Chrysler/Jeep 2.2D, 2.7D and 3.0D CRD diesel engines. Features and Benefits • Essential tool for timing chain work on Mercedes 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0D CDi diesel engines. • The link separating tool and the link assembly tool allow for quick and easy separation and assembly of the timing chain. • May also be used on some Chrysler/Jeep 2.2D, 2.7D and 3.0D CRD diesel engines. • Model No. VSE4801 Specifications Model No…

• Set includes camshaft locking tool, designed to fit between camshaft sprockets to retain timing position on 1.4, 1.6 and later 1.8 16v EcoTec engines.• Also includes flywheel holding tool (for crankshaft pulley removal) and auxiliary belt tensioner locking pin, which are required during timing belt replacement on these engines.Set includes camshaft locking tool, designed to fit between camshaft sprockets to retain timing position on 1.4, 1.6 and later 1.8 16v EcoTec engines. Also includes flywheel holding tool (for crankshaft pulley removal) and auxiliary belt tensioner locking pin, which are required during timing belt replacement on these engines.• Set includes camshaft locking tool, desig…

• Covers engine timing and balance shaft setting on 2.5 & 2.8CRD diesel engines in Chrysler, Jeep and LDV models.• Contains camshaft, crankshaft and balance shaft locking pins plus tensioner adjuster.• Supplied in storage case.Covers engine timing and balance shaft setting on 2.5 & 2.8CRD diesel engines in Chrysler, Jeep and LDV models. Contains camshaft, crankshaft and balance shaft locking pins plus tensioner adjuster. Supplied in storage case.• Covers engine timing and balance shaft setting on 2.5 & 2.8CRD diesel engines in Chrysler, Jeep and LDV models. • Contains camshaft, crankshaft and balance shaft locking pins plus tensioner adjuster. • Supplied in storage case. • Model No. VSE5056Tec…

• Consists of camshaft setting plate, crankshaft locking tool and belt tensioner adjuster for the 1.2 engine.• Additional sprocket locking tool and alignment fixture for the camshaft sensor on the 1.4 VVT engine.Consists of camshaft setting plate, crankshaft locking tool and belt tensioner adjuster for the 1.2 engine. Additional sprocket locking tool and alignment fixture for the camshaft sensor on the 1.4 VVT engine.• Consists of camshaft setting plate, crankshaft locking tool and belt tensioner adjuster for the 1.2 engine. • Additional sprocket locking tool and alignment fixture for the camshaft sensor on the 1.4 VVT engine. • Model No. VSE5061Technical Specification:Applications: Alfa Romeo…

• Designed to remove and install press-fit rear suspension ball joints in situ, on BMW 5 and 7 Series.• These joints are sometimes referred to as 'bushes' but are true ball joints.• Applications: BMW 5 Series E39, 7 Series E38.Designed to remove and install press-fit rear suspension ball joints in situ, on BMW 5 and 7 Series. These joints are sometimes referred to as 'bushes' but are true ball joints.• Remove/install press-fit rear suspension ball joints in situ, on BMW 5 and 7 Series. • Applications: BMW 5 Series E39, 7 Series E38. • Model No. VSE5509Technical Specification:Application(s): BMW; 5 Series E39, 7 Series E38Nett Weight: 2.29kgDimensions: Length: 89mm x Height: 192mmWeight: 2.324KgWarra…

Specialised kit for timing belt replacement of VAG vans with 2.4/2.5D diesels, including the latest common rail engines. Kit includes crankshaft pulley holding tool, camshaft setting plate, injection pump and crankshaft locking pins and tensioner adjuster. Features and Benefits • Specialised kit for timing belt replacement of VAG vans with 2.4/2.5D diesels, including the latest common rail engines. • Kit includes crankshaft pulley holding tool, camshaft setting plate, injection pump and crankshaft locking pins and tensioner adjuster. • Model No. VSE5559 Specifications Model No VSE5559 Applications: VW: Crafter (06-13), LT (96-06), Transporter (90-03) Applications: VW: Crafter (06-13), LT (9…

• Suitable for timing the camshaft and crankshaft, on chain drive 1.3 diesel engines.• Set also includes a tensioner locking pin.• Supplied in storage case.Suitable for timing the camshaft and crankshaft, on chain drive 1.3 diesel engines. Set also includes a tensioner locking pin. Supplied in storage case.• Suitable for timing the camshaft and crankshaft, on chain drive 1.3 diesel engines. • Set also includes a tensioner locking pin. • Supplied in storage case. • Model No. VSE5881ATechnical Specification:Applications: Alfa Romeo: MiTo (08-16)Citroen: Nemo (10-16)Fiat: 500 (07-16), Doblo/Cargo (04-10), Fiorino (08-16), Grande Punto (05-11), Idea (04-12), Linea (07-11), Panda (03-16), Punto (03-11)…