Other Hand Tools

The Monument 2059M Multi-Purpose Four-Way Key is used for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, as well as central heating pump cocks, some radiator and drain off valves.Additional Information:• Key Type: Key

This Monument 2116N Burrfect® Square Deburrer cleans and deburrs 4 different sizes of plastic waste pipe, it is a high quality metal square with each side de-burring a different size of plastic pipe.This deburrer tool will deburr the following sizes: 19mm (3/4in), 32mm (1.1/4in), 38mm (1.1/2in) and 50mm (2in).The 2116N includes a handy hanging hole, and is made in Britain.Additional Information:• Tool Type: Deburring Tool

The Monument 2580U Vent Sizing Gauge is used to measure the size of the slots in an air vent to calculate the area of ventilation provided by a vent where this info is not readily available. The gauge is stepped in increments of 1mm and will measure vent slots from 5mm up to 10mm. Made from stainless steel.Additional Information:• Key Type: Vent Guage

The Monument Copper Pipe Bender, 15-22mm, is designed to professionally bend BSEN1057 15mm and 22mm copper pipe and 15mm stainless steel tube. The aluminium formers are marked with bending angles of 30, 45-and 90-degree offsets allowing for accurate bending. The Monument Pipe Bender is supplied with a replaceable 15mm (MON2601) and 22mm (MON2603) aluminium bending guides.The Monument Pipe Bender can also be used with the MON2626 2626M Bending Arm Extension allowing for easier bending of 22mm pipe. Replacement guides, formers and hook stops are available separately. Additional Information:• Tool Type: Mini Bender• Min. Size (mm): 15• Max. Size (mm): 22

This Monument 2611S Mini Bender is for up to 180° bends on 6, 8 and 10mm copper pipe (outside diameter).Additional Information:• Tool Type: Mini Bender• Min. Size (mm): 6• Max. Size (mm): 10

Monument pipe cutter wheels are made from high quality, heat treated steels.Suitable for both 268 and 289 pipe slices 15 mm and 22 mm copper tube and MON 240C and MON 303 21 mm and 28 mm. Pack colour. Red. Packs are colour coded according to use.

The Monument MOPITUP® Cloth is a versatile super absorbent sheet, which provides a quick, easy and effective way to clean up all water based spillages in the home or workplace. Each sheet will absorb up to 2 litres of water. The water is locked in and cannot be squeezed out. Ideal for:Plumbing emergencies and repairs.Dripping radiators.Radiator and pump removal.Leaking pipes toilets and basins.Overflow leaks in roof tanks.Leaking hot water tanks.Fridge and freezer defrosting.Large floor spillage.Protection for carpets and floors.Draining header tanks. ONLY for use with water based spillages. Sheet Size: 370 x 370mm.Monument 2951Y MOPITUP® Cloths Pack of 3Additional Information:• …

Monument Trac Pipe is a stainless steel, bendable corrugated gas pipe with a yellow polyethylene cover.This cutter has been designed to cut the omegaflex Trac Pipe from DN15/15 mm to DN32/32 mm.Additional Information:• Cutter Type: Trac Pipe• Min. Capacity (mm): 15• Max. Capacity (mm): 32

The Autocut Pipe Cutter Twin Pack (15/22mm) made by Monument Tools, has an aluminium body. Its compact size means it is ideal for work in confined spaces. This Monument Autocut cutter works in one direction to ensure a perfect cutting edge which helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Features and Benefits • Not for use on stainless steel Specifications • Size (1715C): 15mm • Size (1722Y): 22mm

Monument Compression Fitting Spanner double ended spanner for tightening and loosening most 15 and 22 mm compression fitting nuts. Size: 15/22 mm.Twin Pack of Compression Fitting Spanners 15/22mm.Additional Information:• Min. Size (mm): 15• Max. Size (mm): 22

Monument Semi-Automatic Pipe Cutter enables 8-22 mm diameter copper and thicker walled plastic pipes such as those used in Central heating to be cut automatically once it has been sized and tightened. Thin walled plastic pipes may collapse too easily unless an internal support is given to pipes. After tightening no further adjustment or feeding of the wheel into the tube is required. Soft copper can also be cut without crushing if the tool is used like a conventional Cutter by feeding the wheel into the tube.Ideal for use in confined spaces. Capacity 8 to 22mm. Replacement wheel number MON301.Additional Information:• Cutter Type: Copper/Plastic• Min. Capacity (mm): 8• Max. Capacity …

Monument Abrasive Clean Up Strips, 180 grit silicone clean up strips of abrasive waterproof open mesh material for a multitude of cleaning jobs such as roughing up pipe, cleaning inside fittings (can be cut into small strips), deburring metal and wooden surfaces.Additional Information:• Tool Type: Cleaning Tool

The Monument 3034T Copper Fitting Cleaning Brush has stiff steel bristles for cleaning copper fittings and socket formed joints on copper pipe, prior to soldering. Specifications: Size: 15 & 22mm.Additional Information:• Tool Type: Cleaning Tool

The Monument 331E Crutch End Domestic Stopcock Key has been designed for turning on and off hard-to-reach or difficult stopcocks, such as under kitchen units, sinks and stiff to turn outside taps. The design provides increased leverage and is supplied with a removable tommy bar in hexagon shaft. This allows it to connect to a socket and ratchet handle for ease of use in difficult corners.Additional Information:• Shape: Crutch• Length (mm): 220

The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.Additional Information:• Shape: Crutch• Length (mm): 1070

Monument Spark Lighter or Striker for lighting LP Gas Torches, the cup shaped shield traps the gas and ensures ignition.Additional Information:• Torch Type: Accessories

Monument Internal / External Pipe End Deburrer is capable of deburring pipes up to 35mm in diameter.Additional Information:• Tool Type: Deburring Tool

Moument Flux Brushes have wooden handles. Designed for applying flux to facilitate the process of making soldering joints, these brushes can also be used for general-purpose applications. Head Length: 10mm.Total Length: 195mm.Pack Quantity: 5.Additional Information:• Tool Type: Cleaning Tool

This Gasex UN2037 Gas is a professional grade gas from Monument enables 30% faster soldering and brazing than propane.It does not contain butadiene, TUV approved and complies to EN417. Specifications: Thread: 7/16in.Bottle size: 450g.Additional Information:• Size (g): 450• Fitting: EN417

The Monument 437A Adaptor connects the 430F professional soldering and brazing torch (UNEF 7/16 in) to 1in US-Style bottles e.g., propane, MAPP® and MAPPro®.Made in BritainAdditional Information:• Torch Type: Accessories

This Monument 438D Adaptor Primus 2000 To 430F adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g., Primus®2000 and Calor®340.UNEF: 7/16in.Made in Britain.Additional Information:• Torch Type: Accessories

The Monument 4501F GRIP+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Additional Information:• Key Type: Radiator Valve Tool

The Monument 4507X GRIP+ R1 Radiator Thermostatic Radiator Valve Tail Fitting Tool with 16mm internal hex. Fits most radiator valves. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.Additional Information:• Key Type: TRV Tail Spanner

The Monument 4508A GRIP+ T7 3-Prong Gate Valve Tool is for closing and opening damaged gate valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.Additional Information:• Key Type: Spanner