Other Hand Tools

Flexipads Flexible hand sanding holder which can be used with foam and abrasive discs. Perfect for curved surfaces.Size: 125mm. Made in Great BritainAdditional Information:• Pad Type: Sanding Disc Holder

IRWIN 133 years of ingenuity and excellence
Unique non-slip joint set and tested for a perfect cut. This should be re-adjusted only after sharpening
Double, hollow ground blades reduce friction for easier cutting
Drop-forged carbon tool steel handles and blades
Safety stop prevents trapped fingers
Often used by jewellers, silversmiths and model makers

The IRWIN Gilbow G67 is a left hand cranked shear suitable for straight cutting and off cutting in a clockwise direction. These Irwin Gilbow G67 11 inch left hand cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged. The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow G67 tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good, easy, smooth cutting movement. Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to …

IRWIN Hilmor precision extruded aluminium guide. Suitable for use with the GLM bender and available to suit 15 mm or 22 mm pipes.Size. 15 mm O.D.Additional Information:• Tool Type: Guide• Min. Size (mm): 15• Max. Size (mm): 15

Carbon monoxide detector, HxWxD 30 x 110 x 110 mm, pure white. Supplied = assembled. Height = 30 mm. Width = 110 mm. Depth = 110 mm. Colour = pure white. Product type = CO₂ warning alarms. For the detection of CO. Display that indicates the CO concentration. Audible and visual alarm. Carbon monoxide detector suitable for use in any room. When carbon monoxide escapes, every second counts. Rely on this CO detector so that you and your employees are warned in good time in an emergency. If it detects the escape of the gas, an alarm sounds at 85 decibels. The detection area of the alarm covers 62 square metres. It is recommended to use the device in rooms where there is a fireplace, tiled stove or…

RWM150 smoke alarm, extra light, HxWxD 36 x 105 x 105 mm, pure white. Supplied = assembled. Height = 36 mm. Width = 105 mm. Depth = 105 mm. Colour = pure white. Product type = smoke alarms. For use in bedrooms, children's rooms, hallways, etc. Also suitable for use in recreational vehicles (e.g. motorhomes) that people stay in. Recalibration when soiled. The RWM150 optical smoke alarm is suitable for use in bedrooms, living rooms, children's rooms and hallways. It provides a reliable warning about any smoke development and thereby saves lives. It is particularly long lasting thanks to the 10 year battery. The alarm is certified by VdS. It is one of the five best smoke alarms: in its 1/21 issue,…

IRWIN Hilmor precision extruded aluminium guide. Suitable for use with the GLM bender and available to suit 15 mm or 22 mm pipes.

IRWIN Marples 2154 Combination Mortice Marking Gauge is made of sealed rosewood with a brass pull slide to adjust the extra spur for use as a mortice gauge. The knurled brass thumbscrew is used to secure the stock. It has brass facing strips and a thumbscrew adjusting slide.

The IRWIN Vise-Grip 10508154 Construction Nippers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. They also feature machined jaws that provide maximum gripping strength, whilst the moulded ProTouch grips add comfort and improve user experience. Length 225mm (9in).

Mini Torque Multiplier 3.4 to 1 - 6948

The IRWIN Marples M2450 cabinet scrapers are made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish. These scrapers have good edge retention but are easily resharpened. Available in the following sizes:MAR2450: 5in Rectangle (flat) 125mm. MAR2451: 6in Rectangle (flat) 150mm.Type: 5in rectangle (flat) 125mm.Additional Information:• Scraper Type: Cabinet Scraper• Scraper Width (mm): 125

The MarXman Standard Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. For jobs with fixing holes up to depths of 45mm. Each pen contains 250+ bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more.1 x MarXman Standard Professional Marking ToolAdditional Information:• Colour: Green• Pack Qty.: 1

The Maun Wad Punch Kit is a versatile tool for all your punching needs. Perfect for making precisely shaped gaskets and washers, cutting precise holes and shapes. All you need in one complete set. Punch both inner and outer holes for washers and gaskets. Works on a range of soft materials, including felt, rubber, leather, plastic and cork. Made to last, with a robust construction and rust-proof finish. Chemically blackened handle and punches for long life. The centre punch case has been hardened to HRC 57 for durability. Whilst the punches have been ground to a fine cutting edge, then hardened and tempered to HRC 45 for durability. The handle has been fully heat-treated to withstand hammer or …

The Maun Wad Punch Kit is a versatile tool for all your punching needs. Perfect for making precisely shaped gaskets and washers, cutting precise holes and shapes. All you need in one complete set. Punch both inner and outer holes for washers and gaskets. Works on a range of soft materials, including felt, rubber, leather, plastic and cork. Made to last, with a robust construction and rust-proof finish. Chemically blackened handle and punches for long life. The centre punch case has been hardened to HRC 57 for durability. Whilst the punches have been ground to a fine cutting edge, then hardened and tempered to HRC 45 for durability. The handle has been fully heat-treated to withstand hammer or …

The Maun Stationers Punch can punch up to 25 sheets of 80g/m² paper in one go. Easy to use, thanks to a spring stripper and spring return to prevent jamming. Provides a clean punch every time, even when piercing multiple sheets of paper. No more punch jamming in the pierced hole. Built to last, with a robust construction and rust-proof finish. Its precision-ground punch has been case hardened to HRC 57. Detailing on handles provides added grip. Specification: Punch Diameter: 6.4mm (1/4in).Jaw Length: 32mm (1.1/4in).Overall Length: 200mm (8.1/4in).Additional Information:• Plier Type: Pliers

Maun Eyelet Puncher & Fixing Pliers punch through materials and fix eyelets in one operation. No need to buy separate punch and eyelet pliers. Cleanly fix eyelets into a variety of thin materials. The eyelet dies have been case hardened to HRC 57 for durability. Built to last, with a robust pressed steel construction and rust-proof finish. The jaws feature tapered bushes for precision setting of the eyelet dies. Fitted with a long-lasting return spring and zinc-plated handles with detailing for added grip. Use this eyelet puncher to punch and fix eyelets into thin materials such as fabric, leather, canvas, thin plastics and card. Ideal for: arts and crafts by professionals and hobbyists, leather …

Maun Revolving Punch Pliers are built to last, with a robust construction and rust-proof finish. Made from strong but lightweight carbon steel. With a powerful spring to position the rotating punch head securely. There is also a strong return spring on the handle for easy operation. Punches have been hardened for increased durability. Can used to punch holes in soft materials, including leather, card, canvas, soft plastics and textiles. Ideal for professional leather workers for belt hole punching and making other holes. Also for hobby and craft workers. Manufactured to Maun’s design in Germany. Standard 12 months' warranty. Register your tool to extend this to 2 years. Specification: …

This Maun Shear Nose Soft Wire Cutter is ideal for the horticultural industry and craft work. It will easily cut up to 3mm diameter of soft wire, and is comfortable, easy to use, with a high leverage design for minimal effort when cutting. This cutter has a compact, lightweight design and has a double action cutter for trimming wire ends to equal lengths. The jaws are machine ground, and its case is hardened to HRC57 for durability. The cutter has zinc plated jaws and handles, with detailing for added grip. Length 100mm. Width 30mm. Cutting Capacity soft wire 3mm diameter.

Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing. Half Round.Type. MF344.Size.4 X 1/2 in.Grade. Medium.Additional Information:• Stone Type: File

Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Fine.Additional Information:• Stone Type: File

Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. MF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Medium.Additional Information:• Stone Type: File

Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.Additional Information:• Stone Type: File

Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type.MF214.Size. 100 x 6mm (4 x 1/4 in).Grade.Medium.Additional Information:• Stone Type: File

Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. MS24.Size. 115 x 45 x 6 x 1.5mm (4 1/2 x 1 /3/4 x 1/4 x 1/16 in)Grade. Medium. With 1 round edge.Additional Information:• Stone Type: Slipstone