Staple Guns & Nailers

Synthetic, light, resistant body Ergonomic lifting handle Carefully designed holding notch Hi-visibility yellow Durable plastic handle angled to keep knuckels away from panels

Double-action trigger design for sequential driving Dry-fire lockout feature extends tool life LED light feature for optimal vision GRIPZONE overmold for added comfort Drives 1/2 in. to 1-3/8 in. 23-Gauge pin nails

Capable of fastening a wide range of crown staples from 1/4 in. to 9/16 in. On-board dual screen/wire attachment allows installation that guide staples without penetrating wire or screen Knob controls quick depth of drive adjustments through various materials Drives up to 5,500 staples per charge on a P108 18-Volt ONE+ 4.0 Ah LITHIUM+ Battery (sold separately) Battery and charger sold separately

ONE+ COMPATIBLE: Works with any Ryobi lithium ion battery including the P100, P101, P103, P102,P104, P105, P107 and P108 NO AIR COMPRESSOR NEEDED: Internal components powered by lithium ion batteries mean you do not need to bring noisy and potentially dangerous air compressors to the jobsite TOOL-LESS DEPTH ADJUSTMENT: The onboard dial lets you change your driving depth with one hand for on-the-fly changes ILLUMINATE THE JOB with built-in LED lighting that activates from the handle. DRY FIRE PREVENTION: A low staple indicator on this tool lets you know when you need to reload. This protects your tool and work surfaces from unnecessary dry-fire damaging

12% more compact for enhanced maneuverability (compared to the RYOBI P320) 45% smaller nose provides tight spot access and superior drive quality (compared to the RYOBI P320) 2 non-marring pads to keep work surface free of tool marks

For model XSC04 lithium-ion battery nailer 2-1/2 inch with straight surface Highly efficient Easy to use Makita Tool GmbH

Compatible with: DCN690B Type 1, DCN692B Type 1, DCN692B Type 2, DCN692M1 Type 1, DCN692M1 Type 2 Measures approximately 1.00 X 1.00 X 0.65 inches International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This is an O.E.M. authorized part Fits various BOSTITCH models OEM Part Number 159912 This is a BOSTITCH replacement part Part Number 159912 This is an O.E.M. part

For model DBN500 Makita cordless nailer 1 piece Easy to use Makita Tool GmbH

For use with both the Stanley 6-CT-10X Cable Tacker and other cable tackers Contains 1000 x Round Staples Suitable for many types of nail, brad and pin Tacker is bottom loading

R36 Cable Staples are used to secure coaxial & low voltage cable in a fast and efficient way. Used in conjunction with the Rapid R36 Cable Tacker they will quickly tack down telephone & data cable with no issues. Divergent ends make the staple leg travel in opposite directions for a more secure fixing. Features 12mm leg length - For R36 Cable Tacker - High Performance Galvanized Wire - Diverging points Applications: securing low voltage cables, 6 mm diameter max. 1 Box = 1000 pieces.

【Small Size & Smart Using】Build in a light die-cast alloy housing to reduce the device weight, easy to handle and control. A new creative tool for replacing the traditional hammer in tacks nailing. Needs an air compressor to drive it 【Accurate Shooting & Time Saving】Features a magnetized muzzle sleeve to hold upholstery tacks firmly in place. When shooting, the tacks go in straight accurately into the wood without fixing by plier, makes nailing assembly productive and cut your time down considerably 【Effortless Loading & No Potential Damage】The loading board tray comes with the deco nailer that helps you load up to 54 pcs nails at one time. The nailing will not damage the surface of the wood …

R28 Cable Staples are used to secure low voltage cable in a fast and efficient way. Used in conjunction with the Rapid R28 Cable Tacker they will quickly tack down telephone & data cable with no issues. Divergent ends make the staple leg travel in opposite directions for a more secure fixing. 10 mm leg length For R28 Cable Tacker - Galvanized wire High performance strong wire Diverging points, DP, makes leg points go in opposite directions, for extra strong bonding Applications: securing low voltage cables, 4.5mm diameter max. Box 1 x 1000 pieces

Capacity 20 Sheets (20 Pound Paper) Classic Design Adjustable Anvil For Stapling & Pinning Chrome Surface All Metal Construction

Suitable for use with thin cardboard, foils, labels, paper Bosch High quality accessories Suitable for Sealing Strips, Soft plastic panels, Wire netting, Corkboard, Tarboard

Made from hard steel wire Bosch High quality accessories Suitable for Hardwood and Softwood Item package quantity: 1.0

Full control of the stroke release with the enhanced two stage push and release system Soft grip for improved grip and control of the Bosch ptk 3.6 li Tack up to 400 staples with the powerful lithium-ion battery Easy Replenishment of staples strips - no more overfilling of the magazine Battery status indicator, suitable for 8 mm and 10 mm staples (Not compatible with larger staples)

2000 staples made of steel wire of the highest strength with galvanized surface for optimum rust protection These brackets, measuring 10.6 x 4 mm, are ideal for attaching fabrics, textiles, thin metal labels, wire braiding and thin wooden trusses Optimum stapling length: For the stapling material you should use about 1/3 of the staple length. For the anchoring material we recommend about 2/3 of the staple length If you use hardwood as an anchoring material, a ratio of 1/1 is enough The packaging consists of environmentally friendly, recyclable PET plastic and can be reclosed

Nailer/Stapler / Loading Capacity 125 pcs / Staple Leg Length 6-14 mm / Nail Length 15 mm / 0.9 kg

Nailer/Stapler / Loading Capacity 150 pcs / Staple Leg Length 6-14 mm / Nail Length 15 mm / 0.9 kg

Air Nailer / Nail Length 15-30 mm / 1 kg

Hand Stapler / Staple Leg Length 4-14 mm

Hand Stapler

Cordless Tacker / Staple Leg Length 40 mm / Nail Length 50 mm / 18 V