Drill Chucks

Expert Tough Material For Long Life Cutting Holes In Multi Material Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again. The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features: - Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teet…

The Bosch 2608596339 HSS Installation Drill Bit with tapered flute, offset drill bit and straight shank end
The Bosch 2608596339 HSS Drill Bit has a 16mm drilling diameter and an overall length of 400mm. The drill bit and straight shank end are screw-connected, ensuring a low risk of breakage, keeping operations running smoothly. The tapered flute, offset drill bit and shank end prevent jamming in moist wood or cutting through embedded nails. The cylindrical shank is compatible with three-jaw drill chucks. This drill bit is suited to drilling in softwood, hardwood, drywall board and aluminium.
Features:
- Installation Drill Bit is very robust for formwork

- Tapered flute, offset drill b…

Universal holder for the take-up of bits with ¼" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) • Strong retaining ring for optimum fit of the tool in the holder • Strong permanent ma…

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications • Diameter: 8mm • Length: 210mm • Working Length: 150mm • Pack Qty: 10 Features and Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The BOSCH PROFESSIONAL SDS Plus-5 14x550x615 mm Multi-Material Drill is a top-of-the-line electric tool accessory that is designed to provide excellent drilling performance in a variety of materials. Whether you are working with concrete, wood, metal, or any other material, this drill bit is engineered to deliver precision drilling results.With its SDS Plus shank, the drill bit can be securely and quickly inserted into SDS Plus chucks, ensuring maximum power transmission and stability during drilling. This eliminates any chances of slippage or wobble, allowing for accurate and efficient drilling.The 14x550x615 mm size of the drill bit provides the perfect balance of length and thickness, offering …

Drill / 10 mm Drill Diameter / Metal

Highly efficient standard drill with morse taper. For drilling steel, cast steel and cast iron – alloyed and unalloyed. Highly secure against fracture.Specifications:- Ø: 18,0 mm- Total length L1: 228,0 mm- Flute length L2: 130,0 mm- DIN: 345- Material: HSS-G- Cutting: direction right hand cutting- Shank: MT2- Drilling: depth 6 x D- Point cut: Shape A: Cut chisel edge- Point angle: 118°- Helix angle: 20-30°- Tolerance: h8- Profile of flute: normal- Core: normal- Weight: 0,27700 KG

Bit-Set / Steel

Universal holder for the take-up of bits with ¼" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) • Strong retaining ring for optimum fit of the tool in the holder • Strong permanent ma…

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502778 Auger drill bit has the following dimensions:Drillbit diameter: 28.0mmTotal length: 240mmWorking Length: 175mmAdditional Information:• Diameter (mm): 28• Overall Length (mm): 240• …

Fast Drilling-Accuracy - The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and is suitable for soft and hard wood This drill bit has a hexagonal shank …

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

Bosch 2608594222 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 57mm The Bosch 2608594222 HSS-Bi-Metal Holesaw has a diameter of 57mm and a working length of 44mm. BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. Features:
- BiM Progressor Hole Saw offers 2x longer lifetime than predecessor
- Redesigned with Bi-Metal …

Robust chrome molybdenum (cr-mo) steel construction for maximum durability works great with nut letters, hollow sockets, threaded rod drivers and more
Adapts 1/2” square drive impact wrenches to 1/4” hex for use with standard 1/4" Hex shank driver bits
Fits 12 inch square drive impact wrench to 14 inch hexagonal for use with standard 14 inch hexagonal shank driver bits
Provide hexagonal socket

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 51 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Universal holder for the take-up of bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for very special corrosion protection. The retaining ring ensures an optimum fit of the tool in the holder. The strong permanent magnet holds the bits absolutely securely. ¼" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) Contents 899/4/1 Universal Bit Holder, 1/4" x 152 mm

Suitable for use with all SDS Plus drilling machines, this drill bit set is suitable for 5mm, 6mm, 8mm, 10mm, 12mm and 14mm diameter holes. The bits are supplied in various lengths, making them suitable for drilling deeper holes as well as enabling work to be undertaken in more confined spaces. There are duplicates provided of the most common sizes to ensure you get maximum service life out of the set even if bits get worn out or misplaced. Features and Benefits • SDS Plus shank • Suitable for all SDS Plus machines • Contains sizes 5mm to 14mm • Shorter and longer lengths as well as duplicates of the most common sizes • Suitable for hammer drilling into concrete, stone,…

Fast Drilling-Accuracy - The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and is suitable for soft and hard wood This drill bit has a hexagonal shank …

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 21 mm

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Features & Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry delivers maximum hole concentricity for better fixing retention • Optimised four flute design allows …