SFP Transceivers

Specifications:- Performance- SFP transceiver type:Fiber optic- Maximum data transfer rate:10000 Mbit/s- Interface type:SFP+- Multi-mode fiber (MMF) supported:Yes- Fiber optic connectorLC- Fiber cable diameters supported (core/cladding)50/125,62.5/125 µm- Maximum transfer distance300 m- Wavelength850 nm- Tx power (min)-6.5 dBmW- Tx power (max)-1 dBmW- Rx power (min)-11.1 dBmW- Rx power (max)-1 dBmW- Networking standardsIEEE 802.3ae- Features- RoHS complianceYes- SafetyUL, TUV, CDRH- CertificationCE, FCC, VCCI, C-Tick- Power- Maximum voltage3.3 V- Maximum current300 A- Operational conditions- Operating temperature (T-T)0 - 70 °C- Storage temperature (T-T)-40 - 85 °C- Operating relative humidity (H-…

Transceiver / SFP Interfaces

D-link´s DEM-210 and DEM-211 SFP transceivers provide a high performance solution for Dserial optical data communication applications. They are hot-swappable, Small Form Factor Pluggable (SFP) compliant with the Multi-Source Agreement (MSA) specification. The transceivers have duplex LC connectors and provide IEEE 802.3u compliant link for up to 100Mbps in the half duplex mode (or 200Mbps full-duplex mode) transmission for fiber cable applications.D-Link´s highly integrated transceivers offer low jitter performance for extended optical links support without performance degradation. This high performance enables reliable data transfer in short-, intermediate- and long-distances for building, f…

Cisco 10GBASE-LRM SFP Module for 10-Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (SFP-10G-LRM=)

Ethernet Media Converter Enable Service Providers To Use Fiber Cabling To Extend The Size Of Utp Networks. Supporting St Fiber Connector This Converter Can Be Used To Extend Networks With Up To 2Km Of Fiber.

The media converter provides a solution for the migration of copper and fiber optic signals. It allows you to access fiber optic technology and bridge several kilometers without replacing your entire network cabling. FEATURES:- Converts wire-based network signals to fiber optic signals- High quality and high reliability- 10/100/1000Base-TX to 1000Base-SX- Ports: 1x RJ45, 1x ST Duplex- Range: up to 0.5 km- Wavelength: 850 nm- Multimode Dual Fiber- Auto-MDI/MDI-X for cable detection- Auto detection of full and half duplex- Diagnostic LEDs for status and activity monitoring- Suitable for 50/125µm and 62.5/125µm multimode fiber optic cable- Transmitting power: Minimum -17 dBm, Maximum -12 dBm- Re…

Specifications:- Maximum data transfer rate: 2000 Mbit/s- Converter input interface: 1000Base-T- Converter output interface: 1000Base-LX. - Fiber optic connector: SC- Connectivity technology: Wired. - Maximum transfer distance: 550 m- Wavelength: 1310 nm, Fiber mode structure: Multi-mode.- Certification: FCC,CE. - Input voltage: 100 - 240 V- AC input frequency: 50 - 60 Hz- Power consumption (typical): 2.7 W

You can have more control when it comes to protecting your business. From the cloud to your own network and on any device.Technical specifications:Technical information:- Application/Use: Data networkInterfaces/Ports- Connector Type: LC- Total Number of Ports: 1Physical Characteristics:- Approximate weight): 17.9g- Format: Directly interchangeable- Height: 8.4mm- Width: 13.5mm- Depth: 55.6mmFormat / Features:- Network Technology: 1000Base-LX- Maximum Data Transfer Rate: 1- ethernet technology: gigabit ethernet- Supported Media Type: Optical fiber- Fiber Mode Supported: unimodal

10G SFP+ LC SR 300m OM3 MMF transceiver for use in select Aruba products.

X130 10G Sfp Lc Lr

Intellinet Transceiver Module Optical, 10 Gigabit Fiber SFP+, 10GBase-LR (LC) Single-Mode Port, 10km, MSA Compliant, Equivalent to Cisco SFP+10GB-LR, Fibre, Three Year Warranty

Ubiquiti UACC-OM-SM-10G-D-2 network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

Hewlett Packard Enterprise Aruba 10G SFP+ LC SR. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Width: 55.9 mm, Depth: 12.7 mm, Height: 15.2 mm

Lancom Systems SFP-SX-LC1. Maximum data transfer rate: 1000 Mbit/s, Interface type: SFP, Fiber optic connector: SFP.

Ubiquiti Networks UACC-OM-MM-10G-D-20 network transceiver module Fiber optic 10000 Mbit/s SFP 850 nm

Gigabit networking is the upper echelon of performance especially compared to 10 and 100 Mbps connections. Formerly Linksys Business Series now part of Cisco Small Business Network Accessories the MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver offers the ability to tap into faster networking speeds using fiber optic cabling. Installing the module is as easy as sliding it into an accompanying port on a compatible Cisco switch.

Specifications: - SFP transceiver type: Fiber optic- Maximum data transfer rate: 1250 Mbit/s- Interface type: SFP.

Netgear 10 Gigabit SR SFP+ Module. Maximum data transfer rate: 10000 Mbit/s, Maximum transfer distance: 300 m, Cabling technology: 10Gbase-SRFeatures:- Adds 10 Gigabit Ethernet ´´short-reach´´ LC fiber connectivity to the standard SFP+ interfaces- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743Specifications:- Maximum data transfer rate: 10000 Mbit/s- Maximum transfer distance: 300 m- Cabling technology: 10Gbase-SR

Ubiquiti UACC-OM-SM-10G-S-2 network transceiver module Fiber optic 10000 Mbit/s

HPE Aruba 1G SFP LC LX 10km SMF network transceiver module Fiber optic 1000 Mbit/s

Specifications:- Cisco Glc-Sx-Mm-Rgd. - Maximum Data Transfer Rate: 1000 Mbit/S- Cabling Technology: 1000base-Sx. - Connectivity Technology: Wired. - Maximum Transfer Distance: 550 M. - Interface: Sfp, Connector(S): Lc/Pc,- Fiber Type: Mmf

Cisco 10GBASE-LR SFP Module for 10-Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (SFP-10G-LR=)

1000Base-BX WDM Bi-Directional SFP Module
 
- Up to 20 km transmission distance with 9/125 μm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321A as a pair  

        What This Product Does
TP-Link´s TL-SM321B adopts the latest standard 1000Base-BX transmitting over one single-mode fiber with one different wavelength going in each direction. Paired with TL-SM321A You can extend the network distance …

Gigabit Port for a High-Speed Connection Transmit data seamlessly up to 100 meters* between your SFP interface and the copper gigabit port. Plug and Play A plug-and-play** design makes for easy deployment, no technician needed. Durable Metal Casing High-quality metal casing ensures strength and reliability for a long time, maintaining a stable connection in a wide range of environments. High Compatibility Connect your devices with fewer concerns. Our product is perfectly compatible with various optic fiber equipment from different vendors.*** *Laboratory data using the Cat5e cable. Actual distance may vary. **When TL-SM331T is inserted into a 2.5/10/25G fiber port, extra configuration …