SFP Transceivers

Delivering the same high Service levels. Lifetime Warranty. and Technical Support as Hypertec Memory and SSDs. Hypertec Transceivers provide a cost-effective equivalent to over 1.300 market-leading OEM part codes. Hypertec DAC-10GBASE-CU Passive SFP+ Cable Cisco Compatible- 2M

Product information "1.25 Gbps BiDi SFP Transceiver Module 1000BASE-BX-U SM 20 km LC " from LogiLink ProfessionalLogiLink's mini-GBIC (SFP) transceiver family offers the highest quality and reliability. Whether for switch-to-switch. converter-to-switch. converter-to-converter. the wide range of LogiLink modules allow flexible use of fiber optic technology. Compliance with the MSA (Multi-Source Agreement) standard ensures compatibility with third-party products. LogiLink SFP003 network transceiver module Fiber optic 1250 Mbit/s mini-GBIC/SFP

This 850nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125m or 62.5/125m multimode optical fibre.

The SFP+ SR module electrical interface is compliant with SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential.

Data lines are internally AC coupled. The module provides differential termination and reduces differential to common mode conversion for quality signal termination and low EMI.

SFI typically operates over 200mm of improved FR4 material or up to 150mm of standard FR4 with one connector.

Our Optical Transceivers and Networking components for network router and switch equipment are individually tested and certified to meet or exceed OEM specifications for quality. functionality and performance.Whether it’s for Cisco. HP. Nortel. Juniper. or most any other major networking equipment manufacturer. we have an AddOn component that meets your needs. AddOn Networks MGBSX1-AO network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

Industry Standard 1000Base-SX SFP Transceiver (MMF. 850nm. 550m. LC). An Industry Standard SFP transceiver that operates at 850nm over multi-mode fiber. with a maximum reach of 550m connected via a LC connector. This Industry Standard SFP transceiver is 100% compliant with its designed networking application. This SFP transceiver is built comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number. but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available. AddOn Networks SFP-1000BASE-SX-AO network transceiver module Fiber optic 1000 Mbit/s 850 nm

AddOn's industry-standard 1000Base-SX SFP is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot. linking the port with the fiber-optic network. AddOn transceivers (GBIC. SFP. XFP and XENPAK) are 100% compliant for all of our networking product lines and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers. for seamless network performance. AddOn Networks EX-SFP-1GE-SX-AO network transceiver module Fiber optic 1000 Mbit/s 850 nm

Specifications: Performance:- Sfp Transceiver Type: Copper- Maximum Data Transfer Rate: 1250 Mbit/S- Interface Type: Sfp- Maximum Transfer Distance: 100m- Ethernet: Yes- Network Standards: Ieee 802.3z- Wiring Technology: 1000base-T- Auto Mdi / Mdi-X: Yes- Ethernet Lan (Rj-45) Number Of Ports: 1- Plug And Play: Yes- Hot-Plug Compatibility: Yes- Simplified Installation: YesWeight And Measurements:- Width: 15mm- Depth: 15mm- Height: 70mm- Weight: 200g

Micro-Optics products provide seamless connectivity for all your current and future network hardware needs. Lanview MO-UF-MM-1G network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

Palo Alto Networks® PAN-SFP-PLUS-CU-5M compatible 10GBase-CU SFP+ transceiver (twinax DAC. 5m. passive). A 100% Palo Alto Networks® compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that opperates over passive copper. with a maximum reach of 5.00m (16.40ft). This Palo Alto Networks® twinax cable is 100% compliant with its designed networking application. and is factory programed with Palo Alto Networks® specific configuration data required for seamless networking integration. This passive twinax cable will initialize and perform identically to Palo Alto Networks' cable and is built to meet or exceed Palo Alto Networks' specifications. and comply with MSA (Multi-Source Agreement) stan…

The plug and play fiber connection- The Plug & Play fiber optic link enables quick installation- Sends data in high quality and additionally provides excellent reliability- Distance up to 20 km at a maximum data rate of 1.25Gbps- Operating temperature: 0 °C ~ 70 °CThe DIGITUS® mini GBIC (SFP) transceiver modules offer highest quality and reliability. Wether from switch to switch. converter to switch. converter to converter or any else application: The wide product range of DIGITUS® modules makes possible a flexible usage of the fiber technology. The conformity to the MSA (Multi Source Agreement) standard ensures a compatibility to third party manufacturers. Digitus HP-compatible mini GBIC (SFP…

The plug and play fiber connection- The Plug & Play fiber optic link enables quick installation- Sends data in high quality and additionally provides excellent reliability- Distance up to 0.55km at a maximum data rate of 1.25Gbps- Operating temperature: 0 °C ~ 70 °CThe DIGITUS® mini GBIC (SFP) transceiver modules offer highest quality and reliability. Wether from switch to switch. converter to switch. converter to converter or any else application: The wide product range of DIGITUS® modules makes possible a flexible usage of the fiber technology. The conformity to the MSA (Multi Source Agreement) standard ensures a compatibility to third party manufacturers. Digitus HP-compatible mini GBIC (SFP…

The plug and play fiber connection- The Plug & Play fiber optic link enables quick installation- Sends data in high quality and additionally provides excellent reliability- Distance up to 20 km at a maximum data rate of 1.25Gbps- Operating temperature: 0 °C ~ 70 °CThe DIGITUS® mini GBIC (SFP) transceiver modules offer highest quality and reliability. Wether from switch to switch. converter to switch. converter to converter or any else application: The wide product range of DIGITUS® modules makes possible a flexible usage of the fiber technology. The conformity to the MSA (Multi Source Agreement) standard ensures a compatibility to third party manufacturers. Digitus Cisco-compatible mini GBIC…

Our Copper Small Form Pluggable (SFP) transceivers are high-performance cost-effective modules compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE802.3ab supporting 1000Mbps data-rate up to 100 metres over unshielded twisted-pair category 5 cable.

The module supports 1000Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

The module provides standard serial ID information compliant with SFP MSA which can be accessed with address of A0h via the 2 wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2 wire serial …

Our Copper Small Form Pluggable (SFP) transceivers are high-performance cost-effective modules compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE802.3-2002 and IEEE802.3ab supporting 1000Mbps data-rate up to 100 metres over unshielded twisted-pair category 5 cable.

The module supports 1000Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

The module provides standard serial ID information compliant with SFP MSA which can be accessed with address of A0h via the 2 wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2 wire serial …

Product information "1.25 Gbps BiDi SFP Transceiver Module 1000BASE-BX-D SM 20 km LC " from LogiLink ProfessionalLogiLink's mini-GBIC (SFP) transceiver family offers the highest quality and reliability. Whether for switch-to-switch. converter-to-switch. converter-to-converter. the wide range of LogiLink modules allow flexible use of fiber optic technology. Compliance with the MSA (Multi-Source Agreement) standard ensures compatibility with third-party products. LogiLink SFP004 network transceiver module Fiber optic 1250 Mbit/s mini-GBIC/SFP

Delivering the same high Service levels. Lifetime Warranty. and Technical Support as Hypertec Memory and SSDs. Hypertec Transceivers provide a cost-effective equivalent to over 1.300 market-leading OEM part codes. Hypertec DAC-10GBASE-CU Passive SFP+ Cable Cisco Compatible- 3M

1000Base-BX WDM Bi-Directional SFP Module
- Adopts the latest standard 1000Base-BX
- Up to 2 km transmission distance in 9/125 μm SMF (Single-Mode Fiber)
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Supports Hot Swappable



What This Product Does
TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 μm SMF (Single-Mode Fiber).   …

1000Base-BX WDM Bi-Directional SFP Module
- Adopts the latest standard 1000Base-BX
- Up to 2 km transmission distance in 9/125 μm SMF (Single-Mode Fiber)
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Supports Hot Swappable
 
  What This Product Does
TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 μm SMF (Single-Mode Fiber). …

This Fortinet® FN-TRAN-LX compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Fortinet® transceiver. This easy to install. hot swappable transceiver has been programmed. uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Fortinet®. as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. AddOn Networks FN-TRAN-LX-AO net…

10G SFP+ Module, Multimode, DDM LC Duplex Connector, 850nm, up to 300m.The plug and play fiber connection.- The Plug & Play fiber optic link enables quick installation- Sends data in high quality and additionally provides excellent reliability- Distance up to 0.3km at a maximum data rate of 10Gbps- Operating temperature: 0 °C ~ 70 °CThe DIGITUS® mini GBIC (SFP) transceiver modules offer highest quality and reliability. Wether from switch to switch, converter to switch, converter to converter or any else application: The wide product range of DIGITUS® modules makes possible a flexible usage of the fiber technology. The conformity to the MSA (Multi Source Agreement) standard ensures a compatibility to t…

Micro-Optics products provide seamless connectivity for all your current and future network hardware needs. Lanview MO-GEN-LX network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm

AddOn's GLC-SX-MMD-AO is a CISCO compatible SFP transceiver that operates at 850nm over Multi-Mode Fiber. with a maximum reach of 550m connected via a LC connector built to meet or exceed the OEM's specifications. and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested. and are guaranteed compatible.AddOn transceivers (GBIC. SFP. SFP+. X2. XFP and XENPAK) are 100% compliant for all networking product lines. and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers. for …

Add-On's Small Form Factor Pluggable (SFP) transceivers are designed to exceed OEM system requirements. All products are guaranteed 100% compatible and will not void OEM Service/support programs. Our SFP Transceivers utilize industry standard bi-directional serial optical data communication protocols such as Gigabit Ethernet or Fiber Channel reaching speeds up to 8Gbps.All our SFP Transceivers are compliant with the Multi-Source Agreement (MSA) ensuring compatibility with a wide range of networking equipment. Select your choice or Copper or Fiber versions that support Fast Ethernet and Gigabit Ethernet speeds- 100% OEM Compatible- 100% Tested- Conforms to IEEE 802.3z standard- Class 1 Laser …

Meraki now Cisco® MA-CBL-TA-5M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper. 5m). A 100% Meraki now Cisco® compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper. with a maximum reach of 5.00m (16.40ft). This Meraki now Cisco® compatible twinax cable has been programmed. uniquely serialized. and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Meraki now Cisco's cable and is built to meet or exceed Meraki now Cisco's specifications. and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a d…