Computer Cases

For O11D EVO Case
Upright GPU Position
Show off your precious graphics card in a unique way with the Lian Li O11D EVO Upright GPU Bracket. This bracket allows you to mount your graphics card vertically so you can show it off in all its glory.
his bracket supports up to a 3-slot GPU. When installing a 3-slot GPU in the upright position, the radiator width clearance beside the bracket is limited to 130mm, and 120mm for fans.

Top Cover / Black

Make a unilateral upgrade to your gaming PC, with the Kolink Unity Lateral Performance Mid Tower PC Case. This chassis has outstanding component support as well as phenomenal integrated ventilation, making this the ideal foundation for your high-performance gaming PC. With accommodation for up to E-ATX motherboards, 410mm long GPUs, and water-cooling, you can install a wide range of elite-tier hardware. What’s more, there are three pre-installed PWM fans providing efficient cooling out of the box. Kolink Unity Lateral Performance Mid Tower PC Case at a Glance: Mid-tower PC case with outstanding component support Three pre-installed PWM fans Front panel with integrated an…

The Kolink Unity Adapt marks a new chapter in buying a case for your gaming PC. Arriving with an elegant ARGB front panel, users also have the option to swap out for one of three alternatives – each visually exquisite in their own right. This is the Kolink Unity Adapt Skyscape Alternative Front Panel.Available to purchase separately, this replacement panel grants you the ability to swap the look of your gaming PC with a dazzling Skyscape lighting effect. Perhaps you love the Kolink Unity Adapt, but wish for an alternate design, or simply fancy a change. No matter which, the Kolink Skyscape front panel gives you a level of flexibility never seen before in PC customisation.The Features of …

The Kolink Unity Adapt marks a new chapter in buying a case for your gaming PC. Arriving with an elegant ARGB front panel, users also have the option to swap out for one of three alternatives - each visually exquisite in their own right. This is the Kolink Unity Adapt Meridian Alternative Front Panel.Available to purchase separately, this replacement panel grants you the ability to swap the look of your gaming PC with a dazzling Meridian lighting effect. Perhaps you love the Kolink Unity Adapt, but wish for an alternate design, or simply fancy a change. No matter which, the Kolink Meridian front panel gives you a level of flexibility never seen before in PC customisation. The Features of Kolink …

Add style to your cooling with the Kolink Umbra ARGB PWM fanThe Features of Kolink Umbra 120mm PWM at a Glance:120mm white 9-bladed ARGB PWM fan with a curved design12 LEDs on the inside and 9 LEDs outside of the fan for rich coloursARGB 3-pin 5V compatible with Asus Aura Sync for full lighting controlAdjustable speed controls via a Daisy Chain PWM connectorHydraulic bearing to further maintain reliable performanceAnti-vibration pads to ensure quiet operationStylish Lighting & CoolingArmed with 12 LEDs on inside and 9 LEDs outside of the fan, the Kolink Umbra delivers jaw-dropping lighting displays along with impressive cooling performance. Courtesy of the 3-pin 5V header, this 120mm fan is …

[Dual Platform Compatibility] - Designed for ASUS ExpertCenter PN53 with AMD Ryzen 9 6000 and 7000 H-series processors, and ASUS ExpertCenter PN64 with 12th Gen Intel Core processors
[CopperThermal Kit for Efficient Cooling] - Bi-symmetrical extruded fins, fixed thermal module and 6mm copper heatpipes to maximise heat dissipation.
[Complete Versatility] - Includes thermal gap filler for M.2 SSDs to keep SSDs cool. At just 3.3L, the small PC case can be positioned vertically or horizontally to suit your liking. *Our A-NUC95-BKT bracket supports VESA mounting for this Turing case.
[Completely Silent] - Fanless technology design eliminates the need for noisy mechanical fans so that true silence …

PC-000036-DE

SST-TS16

Supports Mini ITX, Micro VAX, ATX, E ATX Motherboard
Designed for high end gaming system compatibility. I/O Port USB 3.0 x 4, HD Audio x 1
5 millimeter thick tempered glass window with Stunning Viewing. PSU : Standard PS2 PSU (optional)
Eliminates the issue with GPU SAG. Vertical mounting of multi GPU configurations on an E ATX platform
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

A unique view: horizontal placement of the box
Includes a bottom cover panel and a display stand
Easy installation
Anti-scratch rubber pad
Non-slip design

✔️The Thermaltake TOUGHFAN 12 White is a PWM-controlled fan with high static pressure and features an optimized development to maximize high-end cooling
✔️The fan blades are made of high-strength materials with a low coefficient of thermal expansion and are manufactured from a special liquid crystal polymer (LCP), a compound that minimizes vibration when the fan is running at full speed
✔️The center of the TOUGHFAN consists of an all-steel motor hub, which provides increased stability and durability
✔️The 2nd generation hydraulic bearing features a new shank design that allows for lubrication preservation on both sides while reducing noise during operation and increasing service life
✔️Th…

Powerful and Noiseless: TOUGHFAN 12 Turquoise high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A
The 2nd Generation Hydraulic Bearing:The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
Anti-Vibration Mounting System: The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising …

Fanless design
Hassle-free installation with a single thumb screw, requiring no extra tools
Fan-less aluminium chassis for easy installation
Model number: 90ME0060-M0XAY0

ASUS Tinker 2 Fanless Aluminum Case Stainless steel

✔️Mini ITX tower in vertical design
✔️Perfect hardware presentation thanks to the three side panels made of 4 mm tempered glass
✔️Two pre-installed 140 mm fans
✔️Enough space for the 4090 GPU
✔️Suitable for radiators up to 280 mm
✔️Motherboard: 6.7" x 6.7" (Mini ITX)

Upgrade your Fractal case with sleek, scratch-resistant glass panel
Fits all Define R6/S2 and Meshify S2 cases
Mounts on either left or right hand side
Seamless bolt-free design
Elegant push-to-lock latching mechanism for easy interior access
Tempered Glass

Durable all-aluminium handle and steel mounting plate
Pre-drilled mounting holes for quick installation
High-quality textured surface treatment
Ergonomically designed handle

15.2 mm narrow fan, ideal fan for systems with limited space
92mm fan with stunning performance, great airflow and static pressure
Utilizes standard ARGB pin 4-1 for compatibility, displays any color combination via an addressable RGB LED control box or compatible motherboard
Wide RPM range from 500 to 2,500 RPM via PWM control
Integrated rubber padding ensures further reduction of vibration noise

15.2mm narrow fan ideal for systems with limited space
92mm fan with stunning performance, great airflow and static pressure
Wide RPM range from 500 to 2,500 RPM via PWM control
Integrated rubber padding ensures further reduction of vibration noise

Equipped with 12 x 2.5 inch SSD or 3.5 HDD hot-swappable compartments
The internal backplane supports 12-port SAS / SATA drives and is equipped with 12Gb/s Mini-SAS HD SFF-8643 connectors and SGPIO compatibility.
Dual power supply support for PS2 (ATX), mini redundancy or 2U redundancy
Supports three 360mm heatsinks
Safety lock on the removable front flap
Supports motherboards up to E-ATX or SSI-EEB
Can be placed upright or horizontally
Supports standard profile PCI x8 slots

Pure white colored radiator, fans and cables to help achieve the ultimate full white system build of your dream
Integrated addressable RGB lighting for water block and fan
Rubber pads included on fan for lower vibration and noise
Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds
Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets

The Phanteks T30-120 fans are premium 120mm fans with three different software controlled modes: advanced, performance and hybrid. These enable you to customize the fans’ operations to your preference. They are constructed from industrial grade materials such as glass fibre reinforced LCP (Liquid Crystal Polymer) and with a thickness of 30mm the corresponding thicker blades yet further improves efficiency.The Phanteks T30-120 at a glance:Made from premium componentsSUNON 3-phase motor and Dual Vapo bearingsEffective as a radiator and case fans30mm depth for add efficiency and stabilityThe Phanteks T30-120 in detail:Designed with Sunon, a leading fan manufacturer, the Phanteks T30-120 fans …

Colour: black
Package dimensions (L x W x H): 8.8 x 13.0 x 13.4 cm
Package weight: 305.0 g
Country of origin: China