Car Service Station Equipment

Adjustable opening with quick release lever. Drop forged chrome vanadium steel jaws hardened and tempered with a nickel plated finish. Display packed.

Comfortable and durable work seat manufactured from easy to clean, oil resistant vinyl foam. Fitted with five large castors and an easy to adjust hydraulic seat, with a built-in storage tray on the base.

For use on cylinders with capacities between 51 and 177mm i.e. cars, vans, trucks, marine and industrial applications. The flexible drive shaft allows easy alignment whilst working, with the honing pressure adjustable to suit the particular application. Suitable for use with an electric or air drill, the maximum working speed is 2400r/min. Supplied with 180 grit stone set, which is also available separately as are other grades. Overall length 300mm. Display packed.

Assortment of standard automotive fuses in plastic storage case. 20 each off (approx.) fuses of ratings: 5A, 10A, 15A, 20A, 25A and 30A. Display carton.

Chrome vanadium steel hardened and tempered with a satin chrome plated finish. Double - ended key sizes. Display packed in plastic case.

General purpose HVLP spray gun with Aluminium body. Suitable for use with all paint types including water - based. Variable fan and fully adjustable flow. Spare nozzle, needle and cap sets are available - see table. Display carton.

Spring steel with steel adjusting key. Display packed.

A portable battery charger that's suitable for 5Ah - 45Ah lead - acid batteries. Fitted with overheating and polarity protection capabilities. Each battery charger is attached with insulated copper leads, insulated battery clips, 1.5M power cable and non - rewireable 3 pin plug.

For workshop and home use. Suitable for conventional lead acid batteries up to 55Ah. Integral carrying handle, insulated copper leads and battery clips. Display carton.

For workshop and home use. Fully automatic with high frequency technology, continuous adjustment for unsupervised charging and microprocessor controlled. Maintains battery in a 100% fully charged state. Features include polarity inversion protection and thermal overload protection. Suitable for wet, AGM and gel batteries between 40Ah and 160Ah. Microprocessor controlled, Supplied with insulated copper leads and battery clips. Display carton.

This portable 6A smart charger does more than just charge 6V and 12V vehicle batteries. It has the ability to activate, analyse and recondition the battery in 10-steps, making it ideal for deep discharged batteries. The charger can be connected to a Lead-Acid or Lithium battery for a long duration without the risk of overcharging. It can also be used in winter temperatures as low as -20°C. It's easy to use and a cost-effective solution to keep batteries in good condition all year round.

This injector seal removal tool is made from heavy-duty carbon steel. It is fully adjustable and designed for the removal of 6.7–8.7mm internal diameter copper injector seals. Supplied inside a blow-moulded case.

This auto probe carries out tests on DC automotive electrical circuits from 6V up to 24V quickly and efficiently. It is ideal for detecting short circuits and locating bad earths. It is also great for continuity tests and powering up components prior to fitting. The probe has an easy-to-read LED display, which illuminates green for positive voltage and red for negative. It has a long 3.45m cable to enable testing to be carried out right around the vehicle. Supplied with 2 x crocodile clips, wire probe and back probe.

Expert Quality, tester with solid brass body housing a test light. Insulation piercing contact point with protective screw cap. Testing range 6 - 24V DC Supplied with 650mm of insulated cable with crocodile clip. Display packed.

Expert Quality, circuit tester with 1.5M of heavy duty cable and earth (crocodile) clip. Insulated contact point to prevent accidental shorting. Testing range 6 - 24V DC. Display packed.

Automotive circuit tester with 180mm long insulated blade. Fitted with a 3.6m (approx.) recoil lead and heavy duty earth (crocodile) clip. Testing range 6 - 24V DC. Display packed.

Wrap round claws with polished chrome finish. Lead screw manufactured from carbon steel hardened and tempered. Jaw design makes them suitable for use in confined areas. Maximum opening 220mm. Display carton.

Portable battery chargers are suitable for most conventional lead acid (wet) batteries. Simple to use with a selector switch to choose either 6V or 12V and an easy read LED display to show the charging progress while in use. The units feature technology to protect the battery from overcharging and excessive current; the 2.8A does this automatically while the 5.6A and 7.0A have a manual reset. For safety the unit is fitted with short circuit and overheat protection, and the vents help keep the internal fan cool. All have a robust design fitted with a built-in carry handle. Attached with insulated copper leads, battery clips and 1.1m power cable.

Portable battery chargers are suitable for most conventional lead acid (wet) batteries. Simple to use with a selector switch to choose either 6V or 12V and an easy read LED display to show the charging progress while in use. The units feature technology to protect the battery from overcharging and excessive current; the 2.8A does this automatically while the 5.6A and 7.0A have a manual reset. For safety the unit is fitted with short circuit and overheat protection, and the vents help keep the internal fan cool. All have a robust design fitted with a built-in carry handle. Attached with insulated copper leads, battery clips and 1.1m power cable.

Portable battery chargers are suitable for most conventional lead acid (wet) batteries. Simple to use with a selector switch to choose either 6V or 12V and an easy read LED display to show the charging progress while in use. The units feature technology to protect the battery from overcharging and excessive current; the 2.8A does this automatically while the 5.6A and 7.0A have a manual reset. For safety the unit is fitted with short circuit and overheat protection, and the vents help keep the internal fan cool. All have a robust design fitted with a built-in carry handle. Attached with insulated copper leads, battery clips and 1.1m power cable.

Suitable for spraying a wide range of oils, cleaning agents and rust proofing liquids. Fitted with adjustable nozzle. Display packed.

The Draper Puller with a two and three leg option for external and internal pulling of gears, bearings, etc. The durable legs are forged carbon steel and have long and short reach facility. The Yoke and thrust bolt are manufactured from carbon steel. The Screw has a rolled thread with chemically blacked finish. Comes supplied with twin and triple yoke that will take either two or three legs. Specifications Material: Carbon steel 2 or 3 leg options Max. Reach: 78mm Max. Spread: 100mm Dimensions: D 3 x W 17.3 x H 41.9 cm

Expert Quality, set of three 6 point Draper Expert HI-TORQ° sockets sizes 17, 19 and 21mm. Manufactured from chrome molybdenum. Fitted with internal and external nylon sleeve preventing damage to wheels and nuts when in use. Supplied in plastic storage case.

Expert Quality, 6 point Draper Expert HI-TORQ° sockets. Manufactured from chrome molybdenum. Sleeved with nylon internally and externally preventing damage to wheels and nuts when used. Display packed.