Telescopes with rings tube mount

Rings

— a pair of rings with screw terminals mounted on a mount.

The inner diameter of the rings is approximately equal to the thickness of the pipe, and tightening the screws ensures a tight fit. In this case, the telescope tube, usually, does not have any special stops and is held in the rings solely due to friction. In fact, this allows, by loosening the screws, to move the pipe forward or backward, choosing the optimal position for a particular situation. However, one should be careful here: too much displacement of the mount from the middle, especially in refractors with a long tube length, can upset the balance of the entire structure.

Anyway, the rings are quite simple and at the same time convenient and practical, and compatibility with them is limited solely by the diameter of the tube. Thus, it is this type of fastening that is most popular nowadays. Its disadvantages include the need to independently select a fairly stable position of the telescope, as well as monitor the reliable tightening of the screws — loosening them can lead to the tube slipping and even falling out of the rings.