Switches Axis

Axis 02315-001 PoE adapter Gigabit Ethernet 1000 V AXIS TU8001 Ethernet Surge Protector helps reduce system downtime. service and maintenance by shielding PoE devices against transient voltage spikes in the Ethernet cable. It is a compact. high-quality product validated to work seamlessly with Axis devices. AXIS TU8001 can be installed close to a PoE switch located indoors or in an outdoor electrical enclosure cabinet adjacent to a network camera or another device. Placing it in an enclosure. you get less exposed wiring. simpler troubleshooting of the whole system and less hardware visible on the pole. The product can be easily mounted on a wall or on a DIN rail.

Axis 02107-001 security camera accessory Pendant bracket

Axis 01857-001 network extender Network transmitter & receiver Grey AXIS Long range PoE Extender kit offers a smart and easy-to-install solution for extending the range of your network and PoE. Without being restricted by the 100 m (328 ft.) limit for Ethernet cables. Axis network video products can be installed at greater distances. Simply connect AXIS Long range PoE Extender kit in-line with the CAT5e or CAT6 cable and power and data are forwarded to your Axis network devices. AXIS Long range PoE Extender kit supports both IEEE 802.3af and IEEE 802.3at compliant devices. With its rugged design. AXIS Long range PoE Extender kit withstands harsh environmental conditions and challenging temperatures.…

Axis 01856-001. Type: Mount, Placement supported: Indoor, Brand compatibility: Axis...

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used.To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.).Compatibility:- AXIS T8129 PoE Extender is compatible with all Axis network video products with PoE, and supports both IEEE 802.3af and IEEE 802.3at. Check in the Typical set-up section for connection examples with Axis …

Axis D8308. Switch layer: L2/L3. Console port: RJ-45. MAC address table: 32000 entries, Switching capacity: 260 Gbit/s. Networking standards: IEEE 802.1x. Rack mounting...

Axis 01449-001. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 4. MAC address table: 8000 entries, Switching capacity: 20 Gbit/s. Networking standards: IEEE 802.1Q, IEEE 802.3af, IEEE 802.3at. Power connector: DC-in jack. Power over Ethernet (PoE)...

Axis 5801-641 surge protector Grey Protect your Ethernet network devices. such as IP cameras. switches or midspans. from lightning entering through the Ethernet cable with AXIS T8061 Ethernet Surge Protector. It can be easily installed on a wall or a pole. and thanks to its weatherproof enclosure. it can withstand water. dust and the ingress of water. AXIS T8061 Ethernet Surge Protector can be installed before the Ethernet cable enters the building to protect indoor network devices. or immediately adjacent to outdoor Axis network cameras.

Axis 02208-001 PoE adapter Fast Ethernet. Gigabit Ethernet 56 V AXIS 30 W Midspan AC/DC is for installations where mains power is not an option. With a power input of either 10-28 V DC or 24 V AC. it can deliver up to IEEE 802.3at (30 W) to your network device. 24 V AC can be needed in harsh environments where new cabling or installations are not possible and you need to retrofit box. dome or PTZ cameras. 10-28 V DC can be used where battery back-up is needed or for solar-powered installations. Or when the network device is built in another equipment and is powered directly from it.

Axis 01535-001 network switch Fast Ethernet (10/100) Power over Ethernet (PoE) Aluminium Ex Connection Rail 4-Port PoE is a high performance PoE switch and 24 V DC power supply for hazardous areas. It is designed to connect explosion-protected network cameras over long distances. The network connection can be realized via optical fiber or copper-bound Ethernet. and is available for single-mode or multi-mode fiber. The power supply provides additional power to the cameras heater to extend the temperature range. The Ex d-rated enclosure is made from seawater-resistant copper-free aluminum and is ready for wall mounting.