Switches Fast

Ports & interfacesCopper ethernet cabling technology10BASE-T, 100BASE-FX, 100BASE-TXSFP module slots quantity1Basic switching RJ-45 Ethernet ports quantity4Basic switching RJ-45 Ethernet ports typeFast Ethernet (10/100)Fast Ethernet (copper) ports quantity4Power connectorTerminal block (6-pin)Uplink ports quantity1Virtual LAN featuresVLAN supportNoPerformancePacket buffer memory1 MBStackableNoPowerPower connectorTerminal block (6-pin)Power consumption (typical)3 WDC input voltage12 - 52 VPow

NetworkData transfer rate100 Mbit/sFiber ethernet cabling technology100BASE-FXConverter input interface100BASE-FXEthernet LAN data rates100 Mbit/sEthernet interface typeFast EthernetConverter output interface100Base-FXMaximum data transfer rate100 Mbit/sFiber optic connectorSCPerformanceWavelength1310 nmMaximum transfer distance20000 mFiber mode structureMulti-mode, Single-modeFiber cable diameters supported (core/cladding)8.3/125,8.7/125,9/125,10/125,50/125,62.5/125,100/140 µmFeaturesLED indica

NetworkConverter input interface100Base-TXNetworking standardsIEEE 802.3, IEEE 802.3uEthernet LAN data rates10,100 Mbit/sEthernet interface typeFast EthernetDuplex systemFull, HalfConverter output interface100Base-FXAuto MDI/MDI-XYesFiber optic connectorSTPerformanceWavelength1310 nmMaximum transfer distance2000 mFiber mode structureMulti-modeFiber cable diameters supported (core/cladding)50/125,62.5/125 µmBuffer size128 KBTx power (min)-22 dBmWTx power (max)-12 dBmWRx power (min)-30 dBmWFeature

NetworkConverter input interface100Base-TXNetworking standardsIEEE 802.3, IEEE 802.3uEthernet LAN data rates10,100 Mbit/sEthernet interface typeFast EthernetDuplex systemFull, HalfConverter output interface100Base-FXAuto MDI/MDI-XYesMaximum data transfer rate100 Mbit/sFiber optic connectorSCPerformanceWavelength1310 nmMaximum transfer distance2000 mFiber mode structureMulti-modeFiber cable diameters supported (core/cladding)50/125,62.5/125 µmBuffer size128 KBTx power (min)-22 dBmWTx power (max)-

The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.Features:2-in-1 PoE Injector and Splitter:- Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially …