Microphones

The Shure A1WS Microphone Windscreen helps you achieve a cleaner clearer sound. Designed to reduce wind / breath noise and plosives its the perfect accessory for your Shure microphone. Suitable for the Beta 56A Beta 57A & 515 series.

The Shure A15LA is a 50 dB attenuator. Use it to connect a line-level or aux-level output from devices such as mixers tape recorders and CD players to a mic-level input.

The Shure A15HP In-Line High Pass Filter is an easy way to clean up your audio signal. When connected to the mic input on a typical mixer the A15HP reduces low frequencies below 100 Hz. The A15HP helps eliminate electrical and mechanical noise in an audio system such as 60Hz electrical hum from AC power lines rumble caused by wind noise or air conditioning systems and stage noise transmitted to a microphone through the microphone stand. The A15HP is ideal for adding to simple audio interfaces and mixers that do not have a high pass filter built-in. Unlike the sharp roll off from most mixer HPFs this has a gentle and pleasing low frequency cut along with a little boost to support frequencies …

Having trouble with hot signals? The Shure A15AS Attenuator is a handy solution. It has been designed to reduce the level of any balanced microphone or line-level signal. The three position slide switch lets you choose between a 15 20 or 25dB reduction to prevent overloading the input on your mixer audio interface or recorder. The A15AS features a female XLR connector on the input and a male XLR connector on the output side. Designed to let phantom power pass through which makes it fully compatible with condenser microphones.

Transmitting and receiving passive antenna for use with the Sennheiser AC2 antenna combiner and any other Sennheiser wirelesss system that lists this as an accessory. Frequency range: 450 - 960MHz Omni-directional

The K&M 85055 Microphone Clip is a generic mic clip made out of high quality elastic rubber for attaching microphones to microphone stands. The microphone clip has a diameter of up to 34mm and features a 3/8" and 5/8" thread size and is suitable for a wide range of microphones.

This Quick Release Microphone Adapter has many benefits for use in live performances or in the studio. You wont have to screw and unscrew microphone holders again and again while using it. Itll also reduce the wear and tear of the threads and adaptors of your stands and clamps. This adapter is perfect for a range of situations. For example you might need to change a microphone mid-performance; this accessory would make doing this quick and stress-free. Or you could be auditioning a number of microphones in the studio; this adapter would make this a seamless task. You get three adapters with this pack ideal for a trio of mic stands.

The K&M 29375 Microphone Table Base is a compact and simple design. It features a 3-pin XLR connection making mounting easy to the base. It eliminates the need for a push button or switch. The K&M 29375 has a zinc-die cast base.

The K&M 29375 Microphone Table Base is a compact and simple design. It features a 3-pin XLR connection making mounting easy to the base. It offers crackle-free switching with a phantom powering pilot light. The K&M 29375 has a zinc-die cast base.

The K&M 27500 XLR Microphone Stand with Gooseneck is tailor-made for professionals seeking a streamlined setup for live performances and studio recordings. This stand distinguishes itself with built-in wired XLR connections allowing microphones to connect directly to the stand eliminating the need for external cables or clamps. With hand-soldered high-quality digital audio cables crafted in Germany ensures pristine sound quality. Its adjustable height ranging from 1165 mm to 1520 mm with the included gooseneck offers versatility for various performing or recording conditions. The stands durable powder-coated build and foldaway metal feet with impact sound-absorbing caps provide a sturdy yet …

The K&M 24050 Microphone Holder is ideal for musician requiring a universal microphone mount that is versatile in its uses. This mount is able to be mounted either vertically or horizontally at an angle of 90 degrees. The hexagonal rod which the microphone attaches to can be attached to the mount either vertically or horizontally. This allows you to attach your microphone in virtually any position you find useful. The clamping width can be as wide as 48mm - allowing you to attach to a wide variety of objects from tables or desks to microphone or music stands. K&M produce many quality musical accessories from music stands to piano stools. Their products are used widely by professional musicians …

The K&M 23966 Popkiller is a necessity for the studio vocalist. The Popkiller features a 330mm gooesneck pole for adjusting the height and inclination to your exact preference. The double nylon screen blocks air passing through without a rattle This model benefits from an adjustable screw attachment for securely fixing the shield to stands of up to 30mm. The Popkiller can be folded into a compact size for easy storage.

The K&M 23900 Quick Release Adapter allows you to easily swap mics from your stand. A perfect product for use in studios and the field you can switch between microphones far faster than with a normal screw thread. Attaching is simple: simply screw the adapter onto the stand and the hexagonal threaded bolt into your holder. The mic is simply placed into the 23900 and it will automatically lock in place. To release press the K&M logo and remove it from the Quick Release Adapter.

The K&M 23600 Microphone Bar is perfect for attaching gear in the studio and the field. It allows you to securely fasten four mics or boom poles to the top of your stand vastly expanding the utility of your stand. Usage is easy simply fix on via the 3/8" thread and tighten the four knurled screws to connect your equipment.

The K&M 23550 Microphone Bar securely holds two microphones or boom arms in place. The 23550 fixes to the top of your microphone stand for instant use. The two holders adjust between 60mm and 172mm for fitting a variety of applications. This models aluminium frame is lightweight compact and easy to attach. The 23550 bar is ideal for musicians requiring multiple microphones in a compact space such as drum kits or home recordings.

The K&M 16022 Universal Drink Holder is ideal for touring musicians and stage setups. The 95mm diameter and semi-closed housing is ideal for fitting bottles cups and glasses securely. The steel frame is durable and rugged for reliable use on the stage and in the studio. This models screw attachment fits poles of up to 30mm and can be adjusted for a tight fitting. The black powder coating has a classic look that matches any stand.

The K&M 16018 Drinks Holder keeps your drinks easily accessible during performances or long practice sessions. Its stable enough to withstand any movements and vibrations onstage. Featuring a maximum diameter of 85mm and an 80mm height its both compact and lightweight. A clamping mechanism ensures that your stands finish remains unscathed and it can be effortlessly mounted onto a tube diameter of up to 30 mm.

1. Suitable for Corsair HS50 Pro / HS60 / HS70 SE headphones to used 2. Match with a microphone to prevent saliva from damaging the capsule and...

1.Replacethemicrophone 2.Applicableproducts:earphones 3.SuitableforHyperXCloudAlphaSheadphones 4.Overalllength:about17cm 5.Weight:11.5g

zealsound Wireless Lavalier Microphone (2TX+3RX) - Compatible with Camera, iPhone, - High-quality product designed for reliability and performance.

【Widely compatibility】USB output, type-C & lightning adapters (included). This k66 usb mic can directly connect with desktop or laptop...

Features It's that easy: the Logitech G Yeti Orb is a premium RGB gaming microphone with LIGHTSYNC that delivers best-in-class audio...

XTUGA J02S Wireless In Ear Monitor System, 2.4G Stereo/Mono In - High-quality product designed for reliability and performance. Ideal for everyday...