Tool Kits

Ideal for drilling hard and abrasive materials
Designed for use in stationary drills
Diamond-ground 4 face carbide tip
Chrome Vanadium Steel

C2 carbide tip
Ideal for drilling hard and abrasive materials
Chrome vanadium steel
Diamond-ground 4 face carbide tip
Designed for use in stationary drills
IRWIN, 133 years of ingenuity and high quality

The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 3.0mm.Total length: 67mm.Working Length: 33mm.Additional …

This set includes five (5) drill bits in the following sizes: 4-Millimetre, 5-Millimetre, 6-Millimetre, 8-Millimetre and 10-Millimetre.
A 135-degree split point grinding ensures perfect centring and reduced drilling pressure.
Industrial quality ground flute for high accuracy drilling and fast removal of chips.
Titanium nitride drill bit body has a low coefficient of friction, reducing power consumption and heat generation.
Drill bit speed can be increased as much as 40 60% and feed by 10 20% without significantly reducing the lifetime of the drill bit.

This set includes nineteen (19) drill bits ranging in size from 1-Millimetre to 10-Millimetre in steps of 0.5-Millimetre.
A 135-degree split point grinding ensures perfect centring and reduced drilling pressure.
Industrial quality ground flute for high accuracy drilling and fast removal of chips.
Titanium nitride drill bit body has a low coefficient of friction, reducing power consumption and heat generation.
Drill bit speed can be increased as much as 40 60% and feed by 10 20% without significantly reducing the lifetime of the drill bit.

This set includes nineteen (19) drill bits ranging in size from 1-Millimetre to 10-Millimetre in steps of 0.5-Millimetre.
A 135-degree split point grinding ensures perfect centring and reduced drilling pressure.
Industrial quality ground flute for high accuracy drilling and fast removal of chips.
Cobalt alloyed drill bit body provides increased heat resistance and a significantly extended service life.
Golden tempered surface resists rust and corrosion.

This Irwin® 10502500 HSS Pro is an industrial quality 19-piece twist Drill Bit Set with outstanding performance and long service life. They are designed for drilling steel and steel castings, alloyed and non-alloyed steel, cast iron, non-ferrous metals, plastics, and other materials.The 118° split point shape provides an optimum centering when starting and a faster drilling rate. There is no need to pre-punch or use a pilot drill they penetrate quickly and require little effort or feed pressure. The bits are highly accurate, and are made from high-performance high-speed steel. Set of 19 HSS Pro Drill Bits: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9. 9.5 and 10mm.…

Ground flute for maximum accuracy and fast chip removal
For low carbon steel, soft metals, wood and plastics.
Precision ground cutting edges
Steam oxide surface finish

Manufactured from high quality HSS steel
Steam oxide surface finish
Precision ground cutting edges
Fast drilling and ideal finishing
Ground flute for maximum accuracy and fast chip removal
IRWIN, 133 years of ingenuity and high quality

Manufactured from high quality HSS steel
Steam oxide surface finish
Precision ground cutting edges
Fast drilling and ideal finishing
Ground flute for maximum accuracy and fast chip removal
IRWIN, 133 years of ingenuity and high quality

The Irwin turbo max range of drill bits
Suitable for portable and cordless drills
Primarily designed for drilling metal and sheet metal
Also perform exceedingly well in all types of wood and plastics
Can be used for drilling stainless steel in combination with a lubricant
IRWIN, 133 years of ingenuity and high quality

This set includes the following bit widths (in Millimetres): 5, 6, 8, 10, and 12. All bits are 160-Millimetres in length.
The new extra deep, asymmetrical flute design secures faster dust removal and increases drilling speeds for a safe, efficient workflow.
A fully hardened drill bit surface treatment results in maximum rupture strength while drilling in concrete, masonry, brick, block & granite
To allow for maximum versatility this bit is compatible with all hammer drilling machines with the SDS-plus holder.
Certification of Prüfgemeinschaft Mauerbohrer e.V. (PGM) which ensures secure anchoring and fixing as well as constant quality assurance

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless low /min multi-purpose drilling. In tests, they produced between 90-129% more holes per battery charge than leading competitors. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like Brickwork, Ceramic Tiles, Breeze Block, Wood, Dry Wall, Gypsum Board, Limestone, Slate, Marble, Eternite and Plastics/Reinforced plastics. Specifications …

Will drill a wide selection of different materials
IRWIN, 133 years of ingenuity and excellence
Model Number:IW10501939

Straight shank rotary percussion
Diamond-ground carbide tip
Chrome vanadium body with high carbon content
Fast and efficient drilling
Single flute design

The Irwin Masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength. Specifications Irwin Masonry Drill …

Straight Pattern
Pvc-coated Handles
For 12-25mm Circlips
140mm x 1.3mm

Combination spanner
Same size at each end
Open end spanner
72-tooth ratcheting spanner with 'flip reverse'
Made from chrome vanadium steel

68 Piece DT70760 Mixed Drill & Bit Set, supplied in a TOUGH CASE+, part of a connectable case system that is TSTAK compatible. Individual TOUGH CASES can be clipped together for easy transportation.

Package weight :1250grams
item package dimensions (LxWxH) :5x3x18 centimeters
Item package quantity: 1.0
Milwaukee Hammer Drill M2 SDS-Plus Set of 5 10/12/14/16/20 x 450 mm

Practical composition with the most common SW sizes: 8, 10-15, 17, 19 and 22 mm offset of the ring side by 15 mm. For easier work on Flat surface:
Same spanner widths: size of the mouth and ring in the same size, easy visibility of the sizes thanks to embossing on keys
. Box contents: 1 x Gedore red combination spanner set. 12 Piece, spanner widths: 6 - 22 mm, weight: 850g, dimensions: 28 x 18.8 x 5 cm, R09105010, 3300989
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Wrench
Double ring spanner
Country of Origin: Taiwan, Province Of China
Model number: 3300924

Increased relief angle from 12° to 17°
Shank Length: 157mm
Diameter: 6mm
Size: 18mm x 152mm

Increased relief angle from 12° to 17°
Shank Length: 157mm
Diameter: 6mm
Size: 18mm x 152mm