Tool Kits IRWIN

This Irwin® Bolt Fastener Remover Expansion 5-piece set is used for removing rounded rusty or painted bolts. It has a unique reverse spiral flute design which securely grips and removes stubborn nuts and bolts.They can be used with a hand ratchet 3/8 inch square drive and has hexagon flats for use with a spanner or adjustable wrench.Universal lobular design for all types of fasteners. Specifications: Sizes: 5/16in (8mm) 10mm 13mm 11/16in 3/4in (19 mm). PTDIRW10504635

IRWIN Blue Groove 6X Wood Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat-treated for extra durability. This 6 Piece Set contains the following sizes: 16, 18, 20, 22, 25, 32mm. Features: 6 Piece Blue Groove 6X Wood Bit Set, ideal for drilling wood and offers 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure …

The IRWIN Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12 degrees to 17 degrees. The shank is 152mm in length and 10% larger in diameter for added durability. This IRWIN Blue Groove 4X Flat Bit Set is supplied in a hard, case. Contains the following: Sizes (dia): 12, 16, 18, 20, 22, 25, 28 and 32mm. Features: Patented Blue Groove point and cutting edge Parabolic scoop for optimised control Fast wood chip removal Increased shank diameter for durability IRW10502826, 6 Piece: 10-25mm in …

The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size 6mmAdditional Information:• Diameter (mm): 6

The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bit’s reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.The IRW10507896 Diamond Drill Bit is 10mm in diameter.Additional Information:• Diameter (mm): 10

The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bit’s reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.The IRW10507895 Diamond Drill Bit is 8mm in diameter.Additional Information:• Diameter (mm): 8

The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bit’s reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.The IRW10507892 Diamond Drill Bit is 5mm in diameter.Additional Information:• Diameter (mm): 5

The Blue Groove Power is the world's first wood drill bit to use IRWIN's pioneering bi-metal technology, creating a drill bit with unrivalled speed and durability even in nail-embedded wood. Designed for high-speed precision drilling, it marks an end to the frustration that tradesmen experience when their drill bits strike a nail, frequently causing standard flat bits to become locked or break. The secret behind Blue Groove Power's extraordinary strength is IRWIN's bi-metal technology, a composition of two high performance components, high speed steel and carbon steel, which both have their own attributes and benefits. The high-speed steel edge provides durability and allows nail cutting, while …

A woodboring bit offering 6 x faster penetration than a standard flat bit
The tri flute tapered flute design gives faster chip ejection and less binding during use
Diameter Length: 14 mm 159 mm
Model number: IW10507602

The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 18 mm.Length : 165 mm.

The Irwin Long Series Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12 to 17. The shank is 400mm in length and 10% larger in diameter for added durability.The Irwin IRW10502845 Blue Groove 4X long flat bit has the following dimensions:Drill bit diameter: 32.0mm

The IRWIN® Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.1 x IRWIN® Blue Groove 4X Flat Bit 25 x 152mmAdditional Information:• Diameter (mm): 25• Overall Length (mm): 152• Pack Qty.: 1

The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 10.0mm.Total length: 133mm.Working Length: 87mm.

The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 5.0mm.Total length: 86mm.Working Length: 52mm.Additional …

The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 3.0mm.Total length: 67mm.Working Length: 33mm.

This set includes five (5) drill bits in the following sizes: 4-Millimetre, 5-Millimetre, 6-Millimetre, 8-Millimetre and 10-Millimetre.
A 135-degree split point grinding ensures perfect centring and reduced drilling pressure.
Industrial quality ground flute for high accuracy drilling and fast removal of chips.
Titanium nitride drill bit body has a low coefficient of friction, reducing power consumption and heat generation.
Drill bit speed can be increased as much as 40 60% and feed by 10 20% without significantly reducing the lifetime of the drill bit.

This Irwin® 10502500 HSS Pro is an industrial quality 19-piece twist Drill Bit Set with outstanding performance and long service life. They are designed for drilling steel and steel castings, alloyed and non-alloyed steel, cast iron, non-ferrous metals, plastics, and other materials.The 118° split point shape provides an optimum centering when starting and a faster drilling rate. There is no need to pre-punch or use a pilot drill they penetrate quickly and require little effort or feed pressure. The bits are highly accurate, and are made from high-performance high-speed steel. Set of 19 HSS Pro Drill Bits: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9. 9.5 and 10mm.…

The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118 point shape for drilling a wide selection of materials.The Irwin IRW10502276 HSS Pro Drillbits comes in a bulk pack of 10. Specifications:Drillbit diameter: 4.5mmTotal length: 80mmWorking Length: 47mm

The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials.The Irwin IRW10502261 HSS Pro Drillbits comes in a bulk pack of 10. Specifications:Drillbit diameter: 3.0mmTotal length: 61mmWorking Length: 33mmAdditional Information:• Tip Diameter (mm): 3• Working Length (mm): 33• Overall Length (mm): 61• Pack Qty.: 10