Headphone Amplifiers BIAMP

Tesirafort? X 800 Is A Meeting Room Dsp5 Years Warranty Tesirafort? X 800 Is A Meeting Room Dsp Featuring Multiple Network And Analog Audio Connection Points With 8 Channels Of Acoustic Echo Cancellation (Aec) Assignable Across Any Digital Or Analog Input. Five 1-Gigabit Ethernet Ports Are Provided Four Of Which Are Poe+ Powered And Which Support Media And Control Traffic Of Various Types Including Avb Dante And Voip.• Up To 64X64 Avb Streams Of Digital Audio Networking With Biamp Avb Devices• Up To 128 X 128 Channels Of Digital Audio Networking With Biamp Avb Devices• 32 X 32 Channels Of Digital Audio Networking Via The Dante Protocol• Aes67-Enabled Dante Endpoint• …

Tesirafort? X 400 Is A Meeting Room Dsp5 Years Warranty Tesirafort? X 400 Is A Meeting Room Dsp Featuring Multiple Network And Analog Audio Connection Points With 4 Channels Of Acoustic Echo Cancellation (Aec) Assignable Across Any Digital Or Analog Input. Five 1-Gigabit Ethernet Ports Are Provided Four Of Which Are Poe+ Powered And Which Support Media And Control Traffic Of Various Types Including Avb Dante And Voip.• Up To 64X64 Avb Streams Of Digital Audio Networking With Biamp Avb Devices• Up To 128 X 128 Channels Of Digital Audio Networking With Biamp Avb Devices• 32 X 32 Channels Of Digital Audio Networking Via The Dante Protocol• Aes67-Enabled Dante Endpoint• …

Biamp Tesira Ex-Logic5 Years Warranty The Tesira Ex-Logic Is A Half-Rack Logic Box For Use With Tesira Audio Dsps. The Ex-Logic Provides Both Logic Inputs And Outputs And Through Software Can Be Configured As A Control Interface. There Are 16 Total Connections That Can Be Used As Inputs Or Outputs. 12 Of The Connections Are Designed As Logic Connections Only And Will Accept Contact Closure Or 5V Ttl For Input Or Provide A Maximum Of 40V/500Ma For Output. The Remaining Four Connections Can Also Be Used For Logic Connections Or As Variable Voltage Control Inputs (E.G. Interface To A Potentiometer). The Ex-Logic Also Provides A Serial Port For The Output Of Command Strings That Can Be Used To Send …

AudioFrequency range20 - 20000 HzPeak power per channel50 WAmplifier classDTotal Harmonic Distortion (THD)0.3%RMS power output per channel (4 Ohm)50 WRMS power output per channel (8 Ohm)30 WCrosstalk (1kHz)-90 dBPorts & interfacesSpeakers connectivity typePhoenix 4-pinEthernet LAN (RJ-45) ports1Technical detailsChannels quantity4 channelsProduct colourBlackConnectivity technologyWiredCooling typePassiveCountry of originUnited StatesSustainability complianceYesHarmonized System (HS) code85184

AudioFrequency range20 - 20000 HzPeak power per channel50 WAmplifier classDTotal Harmonic Distortion (THD)0.3%RMS power output per channel (4 Ohm)50 WRMS power output per channel (8 Ohm)30 WCrosstalk (1kHz)-90 dBPorts & interfacesSpeakers connectivity typeRJ-45Ethernet LAN (RJ-45) ports5Technical detailsChannels quantity4 channelsProduct colourBlackConnectivity technologyWiredCooling typePassiveCountry of originUnited StatesSustainability complianceYesHarmonized System (HS) code8518402000Com

REVAMP4240T Amplifier
REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

REVAMP4240T is the ideal amplifier for applications with 4 zones in mono 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.

In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features …

REVAMP2120T Amplifier
Immaculate sound performance extremely reliable maintenance-free this is how we would describe our latest REVAMP2120T. This 2-channel digital power amplifier provides 2 x 120 watts output power @ 100 volts or @ 4 ohms that can easily be bridged into a powerful 240 watts @ 100 volts or 8 ohm single amplifier.

The REVAMP2120T is a convection cooled class-D amplifier without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times. The ergonomic and efficient 1U design has a galvanic separated toroidal output transformer built in to avert external influences & disturbances. During the configuration of the input gain the rear clip …

Apart Revamp2060t Amplifier5 Years WarrantyThe New Versatile Revamp2060t Is A Professional 2-Channel Digital Power Amplifier With 2 X 60 Watts Output Power @ 100 Volts Or @ 4 Ohms That Can Easily Be Bridged Into A Powerful 120 Watts @ 100 Volts Or 8 Ohms Single Amplifier. This Class-D Amplifier Has A Galvanic Separated Toroidal Output Transformer Built In To Avert External Influences & Disturbances. A Fast Installation Tool On The Rear Is The Clip Led Indicator That Can Be Used During The Configuration Of The Input Gain. The Convection Cooled Revamp2060t Has No Fan Inside Which Implies That The Amplifier Works Silent And Stays Dust-Free At All Times. This Maintenance-Free Feature Together With …

240W Power Amplifier
5 Years Warranty

The PA240P is a fully equipped 240 watts constant voltage power amplifier that will meet all of your requirements. It is the device to built larger professional industrial sound applications. Besides high reliability and the basic functions of a power amplifier the PA240P excels above similar products by the inclusion of its extra technical features possibilities and protection.

The unit is able to drive 4 ohms or constant voltage loudspeaker lines (50 – 70 – 100 volts). The amplifier has an input for background music (with link through) and a priority line input (for paging or evacuation messages) which can be activated by contact closure.…

Ma30 Amplifier5 Years Warranty During The Redefining Process Of The Mixing Amplifier One Of The Key-Conclusions Was To Bring It Back To Basics And Make It User-Friendly. The Cutting-Edge Ma30 Has An Unseen Intuitive User Interface And Ground Breaking Logic And Sheer Rear Panel. The Volume Control Rotary On The Front Panel Is Prominent Illuminated Bigger And Put In The Forefront While The Mic Volume Control Is Smaller And Recessed. The Ma30 Comes In A Compact 9.5” Housing With 1 Mic/Line Input And 2 Stereo Line Mono Summed Inputs. The Smart Left-To-Right 4 Level Priority And Rear Panel Design Makes It Intuitive For Installers. On The Rear Panel You Can Find An Emergency Input Paging Mic …

Pm11225 Years WarrantyMultifunctional Stereo Pre-AmplifierThe Pm1122 Is A Stereo Pre-Amplifier Ideal For 1 And 2 Zone Applications Where You Want To Have A Different Volume Setting And Where A Different Sound Source Is Needed. This Pre-Amplifier Has 2 Stereo Output Zones And Up To 10 Inputs (6 Mic-Line And 4 Line Inputs). All Mic/Line Inputs Can Be Assigned To Zone 1 Zone 2 Or Both Output Zones What Allows You To Create A True 2-Zone System.Multiple Remote Control Options Are Available For The Pm1122. The Pm1122r Is An Analogue Wall Control Panel That Has Music Level And Micro Mix Level Control And Also A Line Input Selector. The Pm1122rl Analogue Wall Control Panel Has The Same Functions As …

LoudspeakersSuitable for outdoor useYesSpeaker type2-waySpeaker placementSurface-mountableAmplifierNoTweeterYesWooferYesTweeter diameter (imperial)3.56 cm (1.4")Woofer diameter (imperial)20.3 cm (8")Tweeter diameter2.5 cmWoofer diameter20 cmNumber of woofer drivers1Number of tweeter drivers1Recommended usageUniversalAudioFrequency range55 - 20000 HzImpedance8 ΩSensitivity89 dBCrossover frequency1550 HzRMS rated power250 WSound pressure level (max)124 dBPerformanceSuitable for outdoor u

Apart Revamp8250 Amplifier5 Years WarrantyThis 8-Channel Bridgeable Power Amplifier Is Probably The Most Versatile Class-D Amplifier In The Range. Combined With A Pre-Amplifier Or Matrix The Revamp8250 Can Be Used To Create 8 Zones In Mono 4 Zones In Stereo Even 4 Bridged Mono Or 2 Bridged Stereo Systems Can Be Created. The Amplifier Has An Intelligent Variable Speed Cooling Fan Built-In To Keep The Unit Cool At All Times. When Installing The Revamp8250 A Handy Input Overload Led Indicator On The Rear And Amplifier Clip Indicator On The Front Will Guarantee A Fast And Hassle-Free Installation. Due To The Amount Of Channels Limited Amplifiers Are Needed In Your Project. This Will Save Money And …

Apart Revamp4100 Amplifier5 Years WarrantyRevamp4100 Is A Professional Digital 4-Channel Amplifier With High Power Class-D Power Amplifier Modules Inside. The Unit Has Extended Speaker And Amp Protection Circuits Inside For Dc Protect Over Current Protect Over Temperature Protect And Protection Against Input Overload.The Revamp4100 Amplifier Has 4 Individual Amplifier Channels But Can Be Bridged Into 2 Stereo ChannelsFeaturesTypePower Amplifier Power Output4 X 100W Weight3.5 KgDimensions W X D X H483 X 230 X 44 MmWarranty5 Years

Apart REVAMP2250 Amplifier
REVAMP2250 is a professional 2-channel digital power amplifier with 2 x 350 watts output power @ 4 ohms but is also bridgeable (1 x 700 watts @ 8 ohms). The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (6 presets). An example of a preset is the combination CH1 subwoofer and CH2 trafo load. In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output allowing you to use 100 volt speakers as top speakers combined with a standard …

Apart Revamp2150l Amplifier5 Years Warranty The New All-Purpose Revamp2150 Is A Professional 2-Channel Digital Power Amplifier With 2 X 165 Watts Dynamic Output Power @ 4 Ohms That Can Easily Be Bridged Into A Powerful 330 Watts @ 8 Ohms Single Amplifier. This Class-D Amplifier Is Convection Cooled Without Built-In Fans Which Implies That The Amplifier Is Completely Noiseless And Dust-Free At All Times. The Unit Has Multiple Speaker And Amp Protection Circuits Built Inside For Dc Protect Over Current Protect Over Temperature Protect And Protection Against Input Overload. During The Configuration Of The Input Gain The Rear Clip Led Indicator Is Very Useful And Handy For A Fast And Easy Installation.…

Apart REVAMP1120T
Class D 1x 120W Amplifier

Our newest single channel professional power amplifier the REVAMP1120T is a unique and versatile Apart design with 1 x 120 watts output power @ 100 volts (or @ 4 ohms). The REVAMP1120T is a class-D amplifier with a builtin galvanic separated toroidal output transformer free of external influences and disturbances. Convection-cooled and excluded from cooling fans this amplifier is reliable maintenance-free silent and dust-free. The rear clip LED indication on the input gain together with the ease of installation via multiple input and link connection options make the REVAMP1120T the preferred installer’s choice. Completely built in a 1U chassis …

Apart Ma120 Amplifier5 Years WarrantyThe Revolutionary Apart Ma120 Mixing Amplifier Offers The End-User An Unseen Cutting-Edge Design And Ease-Of-Use. The Ground-Breaking Intuitive Front Panel Is Clear And Easy To Use Without Any Unnecessary Bells And Whistles. The Volume Control Rotary On The Front Panel Is Prominent Illuminated Bigger And Put In The Forefront While The Mic Volume Control Is Smaller And Recessed. The Unit Offers 120 Watts In 70 Or 100 Volt Mode And Comes With Two Mic/Line Inputs And Four Stereo Line Mono Summed Inputs. The Refreshing Rear Panel Will Give Every Installer An Instant Gratification Due To The Sheer And Logic Design. Together With An Unprecedented Connectivity And …

Two-channel 300-watt analog amplifier
The Voltera A 300.2 is a compact two-channel half-rack power amplifier with a total output power of 300 watts. The amplifier channels can be individually selected to drive 150 watts per channel into 4 ohm 8 ohm 70 V or 100 V. Power sharing is also supported allowing up to 300 watts to be delivered by any channel.

• 300 Watts total
• 2 channels
• Flexible output channel design supporting 100 V 70 V 8 ohm or 4 ohm per channel
• Each channel can drive up to 300 watts (twice the symmetric power)
• Using the included mounting accessories the halfwidth design allows single or tandem mounting in 1 RU or mounting in a variety of …