Headphone Amplifiers

3 analogue stereo inputs: 2 x unbalanced via RCA and 1 x balanced via XLR
Headphone outputs: 2 x unbalanced with 6.3 mm jack, 1 balanced with 4-pin XLR
Remote control for volume, mute, input selection, resampling, output selection
Motorised volume control
Developed and produced in Germany

Product Type: Headphone Amplifiers
Type: 6 channels
Inputs: 8 (1 Main Input (stereo) 1 Direct In (stereo) 6 Aux In (stereo))
Input Connectors: 6.3mm Stereo XLR Jack
Input impedance: 13 kOhm(s)

PORTABLE YET POWERFUL: DAC3 is a pocket-sized digital-to-analog converter (DAC) and headphone amplifier that’s the perfect upgrade for your on-the-go listening. Connect DAC3 directly to your phone, tablet or computer via USB-C and drive high resolution audio to your headphones (or speakers) and reveal stunning detail and music clarity you’ll notice immediately.
PREMIUM PERFORMANCE: DAC3 uses a high-performance headphone amplifier, which easily drives headphones with impedances of 12 ohms or higher. The ES9281A PRO Ultra DAC delivers 32-bit precision, high dynamic range and ultra low distortion with the capacity to support even the most demanding headphones.
HIGH-RESOLUTION AUDIO: With broa…

Powerful portable headphone amplifier with digital audio player capabilities
Easily drives high impedance headphones with a 15Vrms output or below
Features 3.5mm, 6.35mm unbalanced, and 2.5mm 4.4mm balanced headphone output to handle a wide variety of headphones
An onboard Quad-DAC delivers a clear, detailed and balanced sound
An array of digital/analogue inputs and outputs ensures it can be at the heart of any hi-fi set-up

Supports DSD128 5.6MHz playback
Supports PCM 384KHz/32bit playback
Supports DSD native or DoP (DSD over PCM)
Asynchronous transfer mode
SNR: approx. 110 dB (A-weighting)

The ZEN DAC V2 is compact enough to use as a USB DAC/amp on your work desk and stylish enough to use at home with your favourite active speakers or amp, it delivers a level of specification and performance that punches above its super-affordable price tag. The ZEN DAC V2 supports PCM and DXD to 32-bit/384kHz, DSD256 and MQA. DSD remains ‘bit-perfect’ thanks to the True Native Burr-Brown chip design. 16 core = hardcore Thanks to the 16 core tech, the ZEN DAC V2 is now an MQA Decoder rather than a Renderer only. This enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The LED glows green or blue to indicate that the unit is decoding …

XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.N/AN/AHigh impedance and low impedance or bothN/AN/AInstalled sound applications often demand both high and low impedance connectivity in the same venue requiring separate dedicated amplifiers or an external transformer. XMV power amplifiers however can operate in both high-impedance (70V/100V line) or low-impedance (4/8) modes simultaneously eliminating the need for …

Yamaha XMV4140D
Product Overview
A Comprehensive Line-Up to Power Your Sound Solution
XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.

Key Features
High Impedance and Low Impedance . . . Or Both
Installed sound applications often demand both high and low impedance connectivity in the same venue requiring separate dedicated amplifiers or an external transformer. XMV power amplifiers however can operate in both …

✅ FULL MQA DECODING - Native DSD (up to DSD512) and full MQA decoding up to 384kHZ ON POWERFUL 16 - core XMOS processor
✅ ULTRA RES AUDIO - Ultra - res PCM up to 32- bit / 768kHz via USB or 192kHz via optical or coaxial and Advanced 96kHz Bluetooth 5.1 + module with QCC5100 chipset supports various HD formats including aptX HD, aptX Adaptive, LDAC and HWA / LHDC.
✅ MULTIPLE CONNECTIONS - Balanced (4.4mm Pentaconn) and S - Balanced (3.5mm) analogue inputs and outputs. Built - in iEmatch and auto - gain technology automatically adjusts output to suit headphones / IEM sensitivity.
✅TECH PACKED - With technology like: XBass and xSpace settings, balanced circuit design with OptimaLoop multi - …

The xCAN simply makes your music sound better whether you are listening via ear buds at home or chilling with tunes on the go. This portable headphone amplifier is sure to give your music a superior sound

Adastra WA-215 2.0 channels Home White

The VM−3H2 is a 1:4 amplifier distributor for HDMI 2.0 4K HDR signals, which complies with HDCP 2.2 protection standard.The unit equalizes and regenerates the input signal and distributes it to four identical outputs.-Max.Data Transfer — 17.82Gbps (5.94 per graphic channel).-Max.Resolution — 4K60Hz (4:4:4).-HDMI Signal Transmission — Complies with HDR10, HDMI 2.0 and HDCP 2.2, supports color depth, xvColor™, lip sync, uncompressed HDMI audio channels, Dolby TrueHD, DTS-HD, CEC (OUT 1 only), 2K, 4K, and 3D.-I-EDIDPro™ Technology Kramer Intelligent EDID Processing™ — Intelligent EDID management, blocking and processing and pass-through to ensure Plug & Play operation.-Kramer Equalization & re-Klocking™ T…

The VM−2H2 is a 1:2 amplifier distributor for HDMI 2.0 4K HDR signals, which complies with HDCP 2.2 protection standard.The unit equalizes and regenerates the input signal and distributes it to two identical outputs.-Max.Data Transfer — 17.82Gbps (5.94Gbps per graphic channel).-Max.Resolution — 4K60Hz (4:4:4).-Transmission HDMI Signal — — HDR, HDMI 2.0 and HDCP 2.2 compliant, supports color depth, xvColor™, lip sync, uncompressed HDMI audio channels, Dolby TrueHD, DTS-HD, CEC (Output 1 only), 2K , 4K, and 3D.-I-EDIDPro™ Technology Kramer Intelligent EDID Processing™ — Selection, management, blocking, processing and pass-through of the EDID signal that ensures Plug & Play operation.-Kramer Equalizati…

Adastra Ua60 - 60W Rms Mixer/Amplifier100V Mixer-Amplifiers With An Integral Mixer In A Half Width 1U Housing. 3 Switchable Mic/Line Inputs An Rca Line Input And A 3.5Mm Aux Input Are Governed By Front Panel Volume Controls And A Master Output Control. Mono Output To Either 100V Line Or 8 Ohms Speaker Load Is Connected Via A Removable Screw Terminal Connector On The Rear Panel. Supplied With Rack-Mounting Hardware Which Can Be Configured To Mount A Single Unit Against A Wall Or Under A Worktop. Designed As A Versatile Solution For Small To Medium Pa Installations.• Supplied With Hardware For Rack-Mounting 2 Units• 5 Input Channels• 24V Fire Alarm Mute Contacts• 100V Line …

Adastra UA30 - 30W RMS Mixer/Amplifier
100V mixer-amplifiers with an integral mixer in a half width 1U housing. 3 switchable mic/line inputs an RCA line input and a 3.5mm Aux input are governed by front panel volume controls and a Master output control. Mono output to either 100V line or 8 ohms speaker load is connected via a removable screw terminal connector on the rear panel. Supplied with rack-mounting hardware which can be configured to mount a single unit against a wall or under a worktop. Designed as a versatile solution for small to medium PA installations.

• Supplied with hardware for rack-mounting 2 units
• 5 input channels
• 24V fire alarm mute contacts
• …

Biamp Tesira Ex-Logic5 Years Warranty The Tesira Ex-Logic Is A Half-Rack Logic Box For Use With Tesira Audio Dsps. The Ex-Logic Provides Both Logic Inputs And Outputs And Through Software Can Be Configured As A Control Interface. There Are 16 Total Connections That Can Be Used As Inputs Or Outputs. 12 Of The Connections Are Designed As Logic Connections Only And Will Accept Contact Closure Or 5V Ttl For Input Or Provide A Maximum Of 40V/500Ma For Output. The Remaining Four Connections Can Also Be Used For Logic Connections Or As Variable Voltage Control Inputs (E.G. Interface To A Potentiometer). The Ex-Logic Also Provides A Serial Port For The Output Of Command Strings That Can Be Used To Send …

Biamp Tesira Amp 450P
5 Years Warranty

Product Overview
The Tesira AMP-450P is an AVB/TSN enabled four-channel PoE+ conferencing amplifier. The output channels are software configurable including selectable power versus channel count. The AMP-450P includes an internal limiter and is capable of providing 3 watts of continuous power to all four channels. The Tesira AMP-450P is also capable of operating in a burst mode to handle peak signals providing up to 50 watts (4Ω) or 30 watts (8Ω) per channel.

Key Features
• Four channels; 3W continuous power per channel.
• Burst mode to handle peak signals; supports up to 50W (4Ω) or 30W (8Ω) per channel.
• …

Biamp Tesira Amp 450 Bp5 Years Warranty Product OverviewThe Tesira Amp-450Bp Is An Avb/Tsn Enabled Four-Channel Poe+ Conferencing Amplifier For Use With The Desono C-Ic6 Ceiling Speaker. Capable Of Mounting Directly To The Back Of The Speaker This Amplifier Greatly Reduces Cost By Minimizing The Cabling Between The Ceiling Devices And The Rack Room. Each Amp-450Bp Comes With An Optional Mechanical Enclosure To Protect Electrical Connections And Comply With Code Requirements For Above Ceiling Installations. Tightly Integrated With Our Other Tesira Conferencing Products Biamp Is Providing The Only Av End-To-End Solution Of Microphone-To-Speaker With Standard Cat Cables. The Result Is A Conferencing …

The SY-3A-40W is a 40W mono (summed stereo) power amplifier with both 70V and 100V line speaker outputs. This amplifier can be used with many products such as SY-HD-3.5AD HDMI Audio De-embedder or even as standalone amplifier. It also features a voice-over capability that will allow its use in presentation applications.

SWR2311P-10G is an intelligent L2 switch that can supply power to PoE powered devices connected to the switch. Yamaha has integrated its own expertise in networking and professional audio fields and developed it as an L2 switch optimized for Dante? audio networks.

Recommended settings for stable operation of a Dante network (such as QoS EEE and IGMP Snooping) can be made easily

• LAN ports equipped with PoE supply: 8(1-8)
• LAN/SFP combo ports: 2(9 10) (The LAN port and SFP slot are exclusively used)
• PoE supply is compliant with IEEE 802.3at and can supply up to 30W to all PoE ports

Intelligent L2 switch with Dante? optimization function and PoE power supply
The …

The SubZero 4 Channel Headphone Amp is a robust and high-quality headphone amplifier with four headphone outputs perfect for use when professional monitoring is required. Each of the 4 channels feature independent level controls for each headphone output allowing you dial in the desired amount of volume making it ideal for studio live and a variety of other applications. The metal construction makes the SubZero 4 Channel Headphone Amp a reliable addition to any studio.