Crown XTi1002

Create your sound. Shape your sound. Make every show unforgettable with a Crown XTi1002 Power Amp. Expect the best sound quality receive all that and more. Getting a great sound couldnt be easier with Peakx Plus™ limiting three fan settings 500 watts of output power easy to use control software an enhanced sub harmonic synth section and enough pre... moresets to quickly adapt to any room. Get the crowds moving. The Subharmonic Synth section makes it easy to add robust and dynamic bass to any live set. When you need an extra thump to get the audiences attention the Crown XTi1002 has got you covered.

CROWN XTi 1002 Crown Extended Warranty to 6 YearsCrown’s XTi family of amplifiers defines the standard for portable PA systems with unmatched performance technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Se... moreries you’re choosing one of the most powerful and efficient amplifiers on the market today.Sensitivity (volts RMS) for full rated power at 4 ohms 1.4V Frequency Response (at 1 watt into 4 ohms 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) A-weighted 100 dB (103 dB in XTi 6000) Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors. AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) XTi 1000: 6.8A XTi 2000: 8.3A XTi 4000: 10.5A; at idle draws no more than 30 watts. XTi 6000: 15.3A; at idle draws no more than 180 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced 10 kilohms unbalanced Load impedance (note: safe with all types of loads)StereoBridge mono 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions) 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) Voltage Gain (at 1 kHz 8 ohm rated output) XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB. Maximum Input Signal +22 dBu typical Operating Temperature 0? C to 40? C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (? 10%) 100V 120V 220-240V 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width Height Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D XTi 6000 is 16.2 in. (41.15 cm) D Net Weight Shipping Weight 18.5 lb (8.4 kg) 21.5 lb (9.8 kg) XTi 6000 is 24.0 lb (10.9 kg) 30.0 lb (13.6 kg)FeaturesTypePower Amplifier Power Output500 Weight8.4 KgDimensions W x D x H482 x 311.15 x 88.9 mmWarranty3 Years