Lian Li silver

With the TU150, Lian Li has once again succeeded in combining as many features as possible in a compact Mini-ITX case. But Lian Li didn't neglect the design aspect either. The Lian Li TU150 with its extremely compact dimensions of 20.3 x 37.5 x 31.2 cm is particularly easy to transport and therefore has a practical fold-out handle on the top. The s... moreide, front, side and top covers made of brushed aluminium are particularly stylish. Overview of the Lian Li TU150A Mini-ITX Case:Case made of brushed aluminium with steel frameTinted tempered glass side panelSuitable for space-saving SFX or SFX-L power supplies Particularly compact dimensions and low weightCarry handle integrated in the top of the caseSpace for up to two 2.5-inch SSDs or one 3.5-inch HDD and one 2.5-inch SSDSpace for 2.5 slot graphics cards up to 320 mm length, CPU cooler up to 165 mmI/O-Panel with 1x USB 3.1 Type C, 2x USB 3.0 and 1x Audio In/OutLian Li TU150A Mini-ITX: High Mobility Thanks to Compact DesignLian Li uses SFX power supplies instead of ATX form factor for the TU150A Mini-ITX case in order to create more space for powerful gaming hardware. The power supply is placed at the top behind the front of the case, with an internal extension cable leading to the rear slot for the power plug. The cable slots protrude to the left and are covered by a metal cover. Lian Li has also prioritised cable management to keep things tidy. There is space for said cables beneath the removable aluminium cover as well as behind the rear wall of the motherboard tray. On the tray itself, users will be pleased to note that Mini-ITX or Mini-DTX format motherboards can be installed. A total of three PCI slot brackets allow the installation of high-end graphics cards with a maximum length of 32 centimeters. Graphics cards can be up to 2.5 slots in width. If fans are installed on the base of the case, this height is reduced to two slots.The horizontal airflow design with the front and rear 120 mm fan slots means that all your installed hardware will be kept perfectly cool. Close-meshed air inlets are integrated into the front cover, these are made of brushed aluminium, and a removable dust filter is fitted in front of the fan slot. Additionally, two more fans can be attached to the bottom, allowing waste heat produced by the graphics card to be fed to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimeters can be accommodated in the Lian Li PC-TU150A . Those who prefer to opt for water cooling will be pleased to note that a 120 mm radiator can be mounted to the rear of the case. Two 2.5-inch storage devices can be installed in the Lian Li PC-TU150A in between the motherboard and the front and in the area above the motherboard. Instead, a 3.5-inch drive can be installed, with the requisite rubber decouplers included in the case. The I/O panel at the front of the top of the case has the obligatory audio connectors and power/reset buttons, a USB 3.1 type C

Lian Li TU150A computer case Mini Tower Silver PORTABLE AND POWERFUL MINI-ITXCHASSIS CARRY YOUR SMALL AND POWERFUL SYSTEM WHENEVER AND WHEREVER BRUSHED ALUMINIUM EXTERIOR WHY IS LIAN Ll BRUSHED ALUMINIUM SURFACE DETAILING MORE EXQUISITE FULL WINDOWED SIDE PANEL MAXIMUM VISIBILITY FOR THE INTERNAL CONFIGURATION OPTIMIZED FOR COOLING CAPACIT... moreY AN ENTIRELY REDESIGNED INTERIOR TO CREATE A CLEAR AIRFLOW TUNNEL FRONT AIR INTAKE OPTIMIZATION PERFORATED AT BOTH SIDES AND THE BOTTOM OF THE FRONT PANEL FULL WINDOWED SIDE PANEL MAXIMUM VISIBILITY FOR THE INTERNAL CONFIGURATION