Stylish and roomy computer case, which will not allow a shortage of free space on the chassis. This platform uses the Full Tower design. The case can freely use an E-ATX motherboard, a large-sized graphics card and a powerful air-cooled microprocessor. This model is especially good because the platform design provides convenient access to any point of the working space of the chassis.
The system unit uses hinged sidewalls that easily open and close like a door. Computer case Lian Li Lancool 3R W is equipped with a capacious section for the power supply and hard drives. The side walls of the lower compartment are articulated, making access to the bottom of the chassis easier and faster than ever. Among other things, the system unit has a decent cooling system.
Four 120mm fans are mounted inside the case, which ensures that any computer assembly is properly cooled, even high-performance hardware resources with increased heat dissipation. The case also attracts attention with decorative ARGB lighting, which is built into the blades of the factory fans. The operation of the backlight can be controlled using special buttons.
The information in the model description is for reference purposes. Always clarify the specifications and configuration of the product with the online store manager before purchasing. Catalog Lian Li 2026 - new arrivals, bestsellers, and the most relevant models Lian Li.
When you make a purchase through links on our site, we may receive a affiliate commission.
Lian Li G99.LAN3RW.00
LIAN LI Lancool III RGB: The Pinnacle of Airflow and ModularityExperience the next evolution in PC case design with the LIAN... moreLI Lancool III RGB, a Large mid-tower chassis engineered for enthusiasts who demand superior performance, unparalleled flexibility, and stunning aesthetics. This case is the ultimate foundation for your high-end gaming rig or workstation, providing a premium building experience with features that cater to the most ambitious hardware configurations.The Lancool III RGB is built from the ground up for maximum cooling potential. Its design philosophy centers on unrestricted airflow, achieved through fine mesh panels on the front, top, and even the sides of the PSU shroud. This comprehensive mesh structure ensures your components receive a constant supply of cool air, keeping temperatures low and performance high during the most intense gaming sessions or rendering tasks.Key Benefits for the Ultimate Build:* Exceptional Thermal Performance: Say goodbye to thermal throttling. The Lancool III comes equipped with four pre-installed 140 mm PWM fans, including three vibrant ARGB fans at the front, to create a powerful and efficient airflow path right out of the box. The ultra-fine mesh design maximizes air intake and exhaust, ensuring your high-performance components stay cool under pressure.* Expansive Component & Cooling Compatibility: Build without compromise. This case offers massive interior space, providing full support for motherboards up to Extended ATX (E-ATX) and standard ATX sizes. For liquid cooling aficionados, the Lancool III is a dream, offering incredible flexibility with support for up to a 420 mm radiator at the top, and 360mm radiators in the front and above the PSU chamber simultaneously.* Unprecedented Modularity and User-Friendliness: The Lancool III adapts to your needs. It features hinged, tool-less tempered glass side panels for easy access, and a reversible front I/O panel that can be relocated to the bottom of the case for better accessibility. The multi-functional fan brackets can be flipped to provide optimal clearance for different radiator and fan configurations, giving you complete control over your build´s layout.* Effortless and Clean Cable Management: Achieve a professional-looking build with ease. The Lancool III features a sophisticated cable management system with eight Velcro straps, strategically placed routing channels, and sleek magnetic covers that hide cables from view, resulting in an impeccably clean interior that showcases your components.Main Features:* Full mesh front, top, and PSU shroud side panels for maximum airflow.* Four pre-installed 140mm PWM fans (3 x ARGB in front, 1 x standard in rear).* Hinged and tool-less tempered glass side panels on both sides.* Multi-way front fan/radiator bracket for optimized component clearance.* Extensive storage capacity with support for up to 12 SSDs or HDDs.* Reversible front I/O panel with USB Type-C and integrated ARGB controls.* Support for
Lian Li Lancool III RGB Mid Tower Gaming Case - White LANCOOL 3R-W
AVAILABLE IN TWO COLORS, TWO MODELS The LANCOOL III black features a premium hairline brushed aluminum element that looks as... moregood as it feels, while the LANCOOL III white features a minimalist white powder coating. The tempered glass panel allows showing off the internal components. LANCOOL III Comes equipped with 4 x 140mm high airflow PWM fans that provide strong out-of-box cooling performance. Front Intake Fan – 200~1800 RPM / 83.5 CFM /2.3 mm H2O Rear Exhaust Fan - 200~1800 RPM / 83.5 CFM / 2.3 mm H2O LANCOOL III RGB Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan. Front Intake ARGB Fan - 300~1650 RPM / 83.5 CFM / 2.3 mm H2O Rear Exhaust Fan - 200~1800 RPM / 83.5 CFM / 2.3 mm H2O Offering 7 colors and 8 lighting modes (the 8th mode is MB SYNC), the included ARGB controller can be operated via the front IO C and M buttons and can extend its control for 3 additional ARGB devices. EXTREME AIRFLOW CRAFTMANSHIP A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III. Top and 2x Bottom Side Panels The two bottom side panels provide sufficient airflow to efficiently cool the GPU when fans are installed above the PSU shroud. Front Panel The 51% porosity offers an ample direct fresh air intake. HINGED PANELS ALL AROUND The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives. The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle. The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached. FLEXIBLE CONFIGURATION With ample interior room, the LANCOOL III can offer different cooling and usage scenarios. AIR Cooling With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build. AIO Cooling With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo. Custom Water Cooling With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination. SPACIOUS COOLING SUPPORT The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber. Multi-way Front Fan/Radiator Bracket The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews. Removable Top Fan Bracket
LIAN LI LANCOOL III E-ATX CASE, MIDI TOWER, RGB - WHITE LANCOOL 3R-W
The LANCOOL III white features a minimalist white powder coating. The tempered glass panel allows showing off the internal co... moremponents with 4 x 140mm high airflow PWM fans.
Lian Li Lian Li Lancool III RGB Full Tower PC Case - White Lancool III RGB White
The Lian Li Lancool III provides amazing options for creating your next gaming PC. This case has great out-of-the-box cooling... more, including a front mesh panel that offers exceptional airflow in part thanks to four pre-installed 140mm fans, three of which feature RGB. The Lancool III can additionally accommodate up to three 360mm radiators, six additional fans, and multiple pump mounting positions. This case is ideal for high-end builds. With a large internal capacity, you’ll have plenty of options for components from E-ATX motherboards, and GPUs up to 420mm long, as well as multiple storage drives. Furthermore, with the extensive cable management options, your PC build will look clean and tidy. Lian Li Lancool III Full Tower Case at a Glance: Exceptional cooling with support for multiple radiators and fans Excellent cable management options for a clean build Supports full length GPUs up to 420mm long Can support motherboards up to E-ATX (under 280mm) Up to 12 storage drives can be mounted inside Three 140mm RGB PWM fans pre-mounted Outstanding Cooling The Lancool III provides a plethora of options for keeping all your components cool. To begin with, the front mesh panel facilitates great airflow and dust filtration. This is due to it having 15mm holes 2mm apart offering an exceptional 51% porosity. Out of the box, this case comes with three 140mm RGB PWM fans pre-installed at the front, coupled with a 140mm PWM fan in the rear of the case. Alongside these fans, another three 120mm fans can be installed above the power supply chamber, and three 140mm fans can be attached to the top of the case. For the enthusiast who wants to water-cool their components, the Lancool III presents many options. With three radiator mounting locations, at the front, top, and above the PSU that can even be used simultaneously, you’ll have plenty of scope cooling. Furthermore, a custom water loop can easily be assembled thanks to having multiple locations to mount a pump. There are three locations at the base of the case which can house a pump/reservoir combo, and one to the side of the motherboard which can be utilised for a pump or distro plate. Stylish and Clean Lian Li has created an impressively stylish case that looks amazing from any angle, while also offering great functionality. The front of the case catches the eye with its mix of mesh and solid panels. Furthermore, the front I/O can be housed either at the top or bottom of this panel to suit your needs. Moving to the sides, the Lancool III features 4.0mm tempered glass panels on both sides of the case that can be easily opened with aluminium handles that blend in with the rest of the case for a clean finish. Two panels below the glass have mesh sides that continue the perfect blend of aesthetics and functionality as they allow airflow into the PSU compartment. As the Lancool III has tempered glass side panels on both sides, Lian Li has provided plenty of options for cable management. Behind
