When you make a purchase through links on our site, we may receive a affiliate commission.
|
| Lian Li Lancool III Mid Tower Gaming Case - Black LANCOOL 3-XAVAILABLE IN TWO COLORS, TWO MODELS The LANCOOL III black features a premium hairline brushed aluminum element that looks as... moregood as it feels, while the LANCOOL III white features a minimalist white powder coating. The tempered glass panel allows showing off the internal components. LANCOOL III Comes equipped with 4 x 140mm high airflow PWM fans that provide strong out-of-box cooling performance. Front Intake Fan – 200~1800 RPM / 83.5 CFM /2.3 mm H2O Rear Exhaust Fan - 200~1800 RPM / 83.5 CFM / 2.3 mm H2O LANCOOL III RGB Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan. Front Intake ARGB Fan - 300~1650 RPM / 83.5 CFM / 2.3 mm H2O Rear Exhaust Fan - 200~1800 RPM / 83.5 CFM / 2.3 mm H2O Offering 7 colors and 8 lighting modes (the 8th mode is MB SYNC), the included ARGB controller can be operated via the front IO C and M buttons and can extend its control for 3 additional ARGB devices. EXTREME AIRFLOW CRAFTMANSHIP A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III. Top and 2x Bottom Side Panels The two bottom side panels provide sufficient airflow to efficiently cool the GPU when fans are installed above the PSU shroud. Front Panel The 51% porosity offers an ample direct fresh air intake. HINGED PANELS ALL AROUND The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives. The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle. The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached. FLEXIBLE CONFIGURATION With ample interior room, the LANCOOL III can offer different cooling and usage scenarios. AIR Cooling With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build. AIO Cooling With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo. Custom Water Cooling With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination. SPACIOUS COOLING SUPPORT The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber. Multi-way Front Fan/Radiator Bracket The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews. Removable Top Fan Bracket CCLonline.comDelivery: to United Kingdom Report | | £143.99 |  | |
|
| LIAN-LI Lancool III Mid-Tower E-ATX PC Case - Black, BlackGo all-out on your next build with the modular design and thermals on this Lancool III. There's loads of room inside and incr... moreedible adjustability, Currys.co.ukDelivery: to United Kingdom Report | | £159.00 |  | |
|
| Lian Li Lian Li Lancool III Full Tower PC Case - Black Lancool III BlackThe Lian Li Lancool III provides amazing options for creating your next gaming PC. This case has great out-of-the-box cooling... more, including a front mesh panel that offers exceptional airflow in parts thanks to four pre-installed 140mm fans. The Lancool III can additionally accommodate up to three 360mm radiators, six additional fans, and multiple pump mounting positions. This case is ideal for high-end builds. With a large internal capacity, you’ll have plenty of options for components from E-ATX motherboards, and GPUs up to 420mm long, as well as multiple storage drives. Furthermore, with the extensive cable management options, your PC build will look clean and tidy. Lian Li Lancool III Full Tower Case at a Glance: Exceptional cooling with support for multiple radiators and fans Excellent cable management options for a clean build Supports full length GPUs up to 420mm long Can support motherboards up to E-ATX (under 280mm wide) Up to 12 storage drives can be mounted inside Dual locations for a fully featured front I/O panel Outstanding Cooling The Lancool III provides a plethora of options for keeping all your components cool. To begin with, the front mesh panel facilitates great airflow and dust filtration. This is due to it having 15mm holes 2mm apart offering an exceptional 51% porosity. Out of the box, this case comes with four 140mm PWM fans pre-installed at the front and rear of the case. Alongside these fans, another three 120mm fans can be installed above the power supply chamber, and three 140mm fans can be attached to the top of the case. For the enthusiast who wants to water-cool their components, the Lancool III presents many options. With three radiator mounting locations, at the front, top, and above the PSU that can even be used simultaneously, you’ll have plenty of scope cooling. Furthermore, a custom water loop can easily be assembled thanks to having multiple locations to mount a pump. There are three locations at the base of the case which can house a pump/reservoir combo, and one to the side of the motherboard which can be utilised for a pump or distro plate. Stylish and Clean Lian Li has created an impressively stylish case that looks amazing from any angle, while also offering great functionality. The front of the case catches the eye with its mix of mesh and solid panels. Furthermore, the front I/O can be housed either at the top or bottom of this panel to suit your needs. Moving to the sides, the Lancool III features 4.0mm tempered glass panels on both sides of the case that can be easily opened with aluminium handles that blend in with the rest of the case for a clean finish. Two panels below the glass have mesh sides that continue the perfect blend of aesthetics and functionality as they allow airflow into the PSU compartment. As the Lancool III has tempered glass side panels on both sides, Lian Li has provided plenty of options for cable management. Behind the motherboard, a large area is covered by two Overclockers.co.ukDelivery: to United Kingdom Report | | £125.99 |  | |
|
| LIAN LI LANCOOL III E-ATX CASE, MIDI TOWER - BLACK Lancool III BlackAnyone who relies on classic air cooling will be delighted with this case, because the LANCOOL III offers options for install... moreing a total of ten fans. Four 140 mm fans are pre-installed in the LANCOOL III ex works: three on the front and one on the rear wall. A maximum height of 185 mm is intended for CPU coolers. Awd-it.co.ukDelivery: to United Kingdom Report | | £152.34 |  | |
|
| LIAN LI LANCOOL III EATX Midi Tempered Glass Case Lancool III BlackThe Lian Li Lancool III provides amazing options for creating your next gaming PC. This case has great out-of-the-box cooli... moreng, including a front mesh panel that offers exceptional airflow in parts thanks to four pre-installed 140mm fans. The Lancool III can additionally accommodate up to three 360mm radiators, six additional fans, and multiple pump mounting positions. This case is ideal for high-end builds. With a large internal capacity, youll have plenty of options for components from E-ATX motherboards, and GPUs up to 420mm long, as well as multiple storage drives. Furthermore, with the extensive cable management options, your PC build will look clean and tidy. LIAN LI LANCOOL III FULL TOWER CASE AT A GLANCE: Exceptional cooling with support for multiple radiators and fans Excellent cable management options for a clean build Supports full length GPUs up to 420mm long Can support motherboards up to E-ATX (under 280mm wide) Up to 12 storage drives can be mounted inside Dual locations for a fully featured front I/O panel OUTSTANDING COOLING The Lancool III provides a plethora of options for keeping all your components cool. To begin with, the front mesh panel facilitates great airflow and dust filtration. This is due to it having 15mm holes 2mm apart offering an exceptional 51% porosity. Out of the box, this case comes with four 140mm PWM fans pre-installed at the front and rear of the case. Alongside these fans, another three 120mm fans can be installed above the power supply chamber, and three 140mm fans can be attached to the top of the case. For the enthusiast who wants to water-cool their components, the Lancool III presents many options. With three radiator mounting locations, at the front, top, and above the PSU that can even be used simultaneously, youll have plenty of scope cooling. Furthermore, a custom water loop can easily be assembled thanks to having multiple locations to mount a pump. There are three locations at the base of the case which can house a pump/reservoir combo, and one to the side of the motherboard which can be utilised for a pump or distro plate. STYLISH AND CLEAN Lian Li has created an impressively stylish case that looks amazing from any angle, while also offering great functionality. The front of the case catches the eye with its mix of mesh and solid panels. Furthermore, the front I/O can be housed either at the top or bottom of this panel to suit your needs. Moving to the sides, the Lancool III features 4.0mm tempered glass panels on both sides of the case that can be easily opened with aluminium handles that blend in with the rest of the case for a clean finish. Two panels below the glass have mesh sides that continue the perfect blend of aesthetics and functionality as they allow airflow into the PSU compartment. As the Lancool III has tempered glass side panels on both sides, Lian Li has provided plenty of options for cable management. Behind the Box.co.ukDelivery: to United Kingdom Report | | £128.99 |  | |
|
| Lian Li Lian Li LANCOOL III Midi Tower Black LANCOOL III BLACKMid-tower modular chassis for all kinds of configurations Equipped with 4 × 140 PWM fans Featured airflow optimized mesh stru... morecture and hinged side panels Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans Offers 12 storage drives mounting locations Upgraded cable management solution for a clean build LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.The LANCOOL III black features a premium hairline brushed aluminum element that looks as good as it feels. The tempered glass panel allows showing off the internal components.The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.Mou Backtotheoffice.co.ukDelivery: in United Kingdom Report | | £130.99 |  | |
|
| Lian Li Lancool III Black E-ATX Full Tower PC CaseUnveiling the Lian Li Lancool III Black E-ATX Full Tower PC Case: A Gamer's Dream Come True Dive into Exceptional Cooling The... moregaming world is buzzing with excitement over the revolutionary Lian Li Lancool III Black E-ATX Full Tower PC Case. This powerhouse is not just a case; it's a sanctuary for your gaming rig. Let's explore why this sleek marvel deserves a spot in your gaming setup. Exceptional Cooling Features Out-of-the-Box Brilliance: Boasting a front mesh panel with 15mm holes spaced 2mm apart, the Lian Li Lancool III Black achieves an outstanding 51% porosity. This design ensures unparalleled airflow and efficient dust filtration. Equipped with four pre-installed 140mm PWM fans, this case is ready to keep your components cool from the get-go. Versatile Fan and Radiator Support: Beyond the included fans, enthusiasts can add three 120mm fans above the power supply chamber and three 140mm fans to the top. For water-cooling aficionados, the Lancool III offers three radiator mounting locations, providing flexibility for simultaneous use. Additionally, multiple pump mounting positions cater to those craving a custom water loop. Impressive Design Harmony Lian Li has masterfully blended style and functionality in the Lancool III. The front, adorned with a mix of mesh and solid panels, captivates attention. The 4.0mm tempered glass panels on both sides, easily opened with aluminum handles, showcase your rig from every angle. Cable Management Nirvana The Lian Li Lancool III Black understands the importance of a clean build. Tempered glass side panels on both sides offer ample cable management opportunities. Magnetic hinged panels and eight Velcro straps behind the motherboard cover provide an organized look. Four dedicated locations for fan controllers or ARGB hubs give you the freedom to optimize your setup. A Haven for High-End Builds The Lian Li Lancool III Black opens doors to a world of hardware possibilities. Supporting motherboards from Mini-ITX to E-ATX (under 280mm wide), this case accommodates diverse setups. With eight expansion slots and clearance for GPUs up to 420mm long, even the most substantial graphics cards find a home. Storage Flexibility Creativity knows no bounds with the Lian Li Lancool III Black. Whether you're a gamer or a creative professional, this case provides options for four 3.5" HDDs and eight 2.5" SSDs or twelve 2.5" SSDs. Detachable panels, modular drive bays, and clever mounting points ensure your storage needs are met. Specifications Color: Black Dimensions: 526mm x 238mm x 523mm (L x W x H) Materials: Aluminium Handles, 0.8mm SGCC Body, 4.0mm Tempered Glass Panels Motherboard Support: Mini-ITX, M-ATX, ATX, E-ATX (under 280mm) GPU Support: 420mm PSU Support: ATX (under 220mm) Fan Support: Front: 3 x 120mm / 3 x 140mm Top: 3 x 120mm / 3 x 140mm Rear: 1 x 120mm or 1 x 140mm Above PSU: 3 x 120mm Radiator Support: Front / Bottom: 360mm Top: 420mm Air Cooler Clearance: 185mm max Drive Support: Behind Technextday.co.ukDelivery: in United Kingdom Report | | £126.89 |  | |
