Salewa Litetrek Pro III

The Salewa Litetrek Pro III tent is a double wall tent for 3 people, designed for light trekking in alpine terrain, where the keys are weather protection, wind stability, lightness and compact size. Its 3-season specification is optimized for use during the temperate months of the year. Tested in wind tunnel by the Technical University of Munich to... morehave stability at 90 km/h.Its robust and reliable semi-igeodesic, double-walled construction facilitates integral use of space and ensures an optimal balance between weather protection and ventilation. The 100% self-sustainable design means that you can easily mount it on rocky terrain or in alpine locations where there is not enough room to mount it with tension ropes and picks. Anchor points can also be extended for more flexibility, such as in snowy terrain.

A very lightweight, robust and reliable, self-supporting 3-person tent for alpine trekking.The Litetrek Pro III is a 3-person, double wall tent, designed for lightweight trekking in alpine terrain, where protection against severe weather, wind stability, light weight and compact pack size are key. Its three-season spec is optimised for use during t... morehe milder months of the year. Wind-tunnel tested for stability at 90 km/h by the Technical University of Munich.Its robust, reliable semi-geodesic, double wall construction enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its tear-resistant 20D ripstop nylon flysheet is silicone- and PU-coated to give it a 3,000 mm water column, the floor is made of robust PU-coated 40D ripstop nylon that gives a 10,000 mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity.In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. What really sets the Litetrek Pro III apart is its versatility – check out the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required.Features:- Footprint available- Repair set- Door Storage Pockets- Different door opening options- Zipper with anti-catch flap- Nylon hooks for fixing the fly even in cold conditions- Extendable and replaceable anchor points- Cord locks- Extended guy line webbing- Reinforced Hypalon sleeve finishing- Vestibule extension solution- 100% Self supporting construction- Vestibule for gear storage and cookingSpecifications:- Area Inner Tent: 3 m²- Area Vestibules Front: 1 m²- Entrances: 1- Height Inner Tent: 1 m- Persons: 3 Persons- Ventilations: 1- Ventilation type: Ventilation panel with zippers- Vestibules: 1- Weight Max: 2420 g- Weight Min: 2100 g- Pegs quantity: 10- Pole quantity: 3- Pole diameter: 9 mm- Poles: 7001 T6 ultralight Aluminium 7001 T6 ultralight Aluminium- Tent construction: Semi geodesic double wall- Floor: Innertent: 20D Nylon Ripstop with mesh and mosquito net entrance Innertent- Fly: Coating Fly Sheet: silicone/PU coated Coating Fly Sheet- Guy lines: Reflective Dyneema Reflective Dyneema- Guy lines quantity: 4- Pegs: Y-Pegs Aluminium 14,5 cm Y-Pegs Aluminium 14,5 cm- Wind Protection: Minimum 90 km/h windspeed.- Watercolumn Floor: 10000 mm- Watercolumn Fly: 3000 mm