Drills & Screwdrivers

AC220-240V electric hammer switch suitable for Bosch GBH2-26DE GBH2-26DFR GBH2-26E GBH2-26DRE GBH2-26RE electric hammer Replacement of Bosch GBH2-26DE GBH2-26DFR GBH 2-26 E GBH2-26DRE GBH2-26 RE AC sw more→itch AC220V rotary hammer switch Colour:Black + Red Material:ABS + metal Package Contents: 1* Switch Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Impact Sockets Developed For Your Power Tools. Specially designed to resist the stresses from impact, or "Dynapact" tools. Their special steel and heat treatment ensure very high yield strength and more→wear resistance. All sockets and accessories feature a groove and side-hole to UNI ISO 2725. Locking is ensured by a through-pin and retaining ring (to be ordered separately). Never fit chrome-finished manual sockets to Impact tools.

HAMMER DRILL 550W

Use for model GA4030R rotary and impact drill Sold in each Easy to use Manufacturer: Makita Werkzeug GmbH

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly more→midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly more→midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly more→midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly more→midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly more→midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly more→midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

Shaft type: 6.35 mm / 1/4-inch hex Size: 100mm; Size: T8, T10, T15, T20, T25, T27, T30, T40 Materials: S2 alloy steel; Head type: Torx; can be magnetic bits firmly attached to screwdriver; 8 siz more→es meet a set of your needs. The installation can easily suck electric screwdriver screws, manual screwdrivers, electric drills, general group tools. These extra-long screwdriver bits are heads that fit all models of screwdrivers, just like drills, screwdrivers, screwdrivers, etc. All sizes are there, these elongated tips go everywhere. They adapt very well to a drill and they are magnetized, which is very practical not to lose the screws. Features: Strong magnetic, good workmanship,…

FEATURES SIZE - 20mm leather hole punch for making precise smooth holes in thick fabrics, belts and straps. MATERIAL - This hardened hole punch is made of heat-treated carbon steel for durability. S more→pecially designed for fast chip removal and neat and attractive cuts. FEATURES - Hexagonal shank hollow punch can be used with electric drill or drill press to cut multiple layers of fabric easily. APPLICATIONS - Widely used for punching leather, paper, soft plastic, rubber, PVC board, clothes, shoes, canvas and other materials. Note - Use a backing plate (plywood/soft washer) during the punching operation to avoid cutting into the workbench. Product Information Product Name: Belt Punch …

Brand new and high quality HSS Straight Shank Twist Drill Bit Straight shank design is more suitable for many electric drills and drilling machines Sharp and twisted flute will make the drilling be mo more→re easy and effortless. Suitable for wood, aluminum, plastic and other materials drilling Diameter: 4mm / 4.2mm / 4.5mm / 5mm / 5.2mm / 6mm / 8mm / 10mm Total lenght: About 200mm colour: Silver Material: HSS Package Contents: 8 * Twist Drill Bit Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features 1. High hardness alloy head, hard alloy blade, harder and more wear-resistant than ordinary drill bits. 2. Firmly clamped, anti slip hexagonal handle, sturdy and durable with a long service more→life. 3. Strong eccentric drill, capable of quickly and efficiently drilling holes on hard ceramic tiles. Its crooked head design allows for unlimited drilling, and the drilling on the tiles is accurately positioned, allowing for quick entry and efficient drilling. 4. Widely used: This tile drill bit can easily penetrate various materials, such as glass, tiles, marble, wood, ceramics, stone, concrete, bricks, hard plastics, cement, etc. 5. Easy to install and use: This tile drill bit can quickly …

About this article.HSS4241 high speed steel step drill: 6 - 60 mm / 0.24 - 2.36 inch step drill spiral flute, 12 steps, nitrogen-coated.Durable Made from high speed steel, shank diameter: 13 mm; Drill more→head length 82mm.Spiral cutting flute: 135 point and double corrugation for self-centering and deburring, spiral groove helps remove chips when drilling.Use: Suitable for workpieces with a hardness of less than 25 mm, e.g. B. carbon steel, iron sheet, insulation panels, PVC panels, floorboards and wood thicknesses less than 5 mm.12-step steps: 6,10,15,20,25,30,35,40,45,50,55,60mm (12 steps).More product details.

TUNGSTEN CARBIDE STEEL ROTARY BUR SET: These carbide rotary burrs are made from premium Tungsten Carbide Steel, which is sharp, sturdy and durable. Overall length: 45-50mm, 1/4'' cutting diameter, 35m more→m shank length, 1/8'' shank diameter compatible with most rotary tools and die grinders.DOUBLE CUT DESIGN: The groove lines of the head of this carbide rotary cutter are crossed. It is used on wood, iron, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, as well as marble, jade, bone, etc Quickly ensuring cross grooves and chips during grinding and carving.HIGH WORKING EFFICIENCY: The processing efficiency is tens of times higher than manual file tool, and almost ten …

This extension connector is compatible with Karcher K2, K3, K4, K5, K6, K7. Stable characteristics, high reliability. Pressure washer replacement spare part. Quick joint adapter, easy to install and o more→perate, saving time and effort. Selected durable plastic material, anti -corrosion and wear resistance. Please confirm compatibility before ordering.

S.OF. Electric hammer drill. power: 500w. variable speed de 0 a 2600rpm. with power control. automatic drill chuck de ø13mm. ergonomic soft touch handle. adicional handle with depth rod. 2m of cable. more→dimensions: 27x20cm (depth/height) 220/240v 50hz koma toolsSpecifications:- Units per box: 1- Weight: 1,676kg- Power (w): 500- Measurement: 27x20cm- Voltage (v): 220-240v- Speed (rpm): 2600- Chuck: ø13mm- Cable: 2m- Type: Drill- Power control: Yes- Chuck: Automatic- Additional handle with depth rod: Yes