Drills & Screwdrivers Chicago Pneumatic

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Composite Drills for Vehicle Service and MRO Composite housing with thermoplastic rubber handle grip Wings on right & left sides to guide the forefinger Large teasing trigger and progressive valve allowing more control to start holes Low speed gear box Flat back part for better pushing action while drilling and tapping Reverse lever on the top for easier access Handle exhaust allowing the air to flow away from the operator Supplied with high quality industrial Jacobs chucks for longer use - Keyed Metal Excellent for drilling, honing, reaming and hole sawing

Benefits: Industrial durability. Operator comfort thanks to exclusive CP Ergo Wing. Perfect for drilling reaming, tapping applications. Features: 3/8" (10 mm) industrial pistol drill with Jacobs industrial keyed chuck Reversible switch Ergonomic & compact body Low noise and low vibration Low run out: below 0.15 mm

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Internal clutch adjustment, cushion clutch, with magnetic bit holder. 1/4" NPTF air inlet for 10mm hose, air pressure: 98.1, average air consumption 3CFM. Overall length: 224mm.

Note: Image is for illustrative purposes only and may differ from the actual product

High power operator comfort thanks to exclusive ergonomic features. Air drills for industrial maintenance and production. Designed for intensive duty and high durability. 3/8" (10mm) industrial pistol drill with Jacobs industrial keyed chuck. The best power to weight ratio with 1hp (750W) motor. Durable gearbox reduce maintenance cost and downtime. Power: 1hp (750W). No load speed: 2600rpm. Chuck capacity: 10mm (3/8"). Maximum torque: 6.3Nm (4.7ft/lbs). Sound pressure level: 94db(A) Vibration level: 3.6m/s Overall length: 200mm

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Composite Drills for Vehicle Service and MRO Composite housing with thermoplastic rubber handle grip Wings on right & left sides to guide the forefinger Large teasing trigger and progressive valve allowing more control to start holes Low speed gear box Flat back part for better pushing action while drilling and tapping Reverse lever on the top for easier access Handle exhaust allowing the air to flow away from the operator Supplied with high quality industrial Jacobs chucks for longer use - Keyed Metal Excellent for drilling, honing, reaming and hole sawing

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

CP772H - 3/4" Heavy Duty Impact Wrench One hand push button forward/reverse power regulator. Four positive power settings in forward and ultimate power in reverse. Teasing throttle design for precise control. Handle exhaust with 360 air inlet swivel to prevent hose kinks. Comfortable contoured handle grip. Hammer mechanism DynaPactTM clutch. Pin clutch oil bath. Output drive: 3/4". Air inlet thread: 3/8" NPT. Free speed: 4,200rpm. Air consumption: 6.0cfm. Air pressure: 90psi. Standard bolt capacity: 3/4". Working torque range: 150 - 700Nm. Max. torque @90psi rev: 1356Nm. Sound pressure level: 96dBA. Vibration level: 4.9m/s2. Overall length: 245mm.

Note: Image is for illustrative purposes only and may differ from the actual product

B16MV Straight vibration-damped needle scaler with good power to weight ratio. Great durability on all industrial maintenance applications. Easily converts into chipping hammer. Low vibrations for smooth operations. Perfect tool for long hours of operations. One hand operation. Adjustable front tube grants extended needle life. Blows Per Minute: 2,400bpm Needle/chisel capacity: 19 x 3 (1/8) Bore and stroke: 23.5 x 11mm / (0.92 x 0.43") Net weight: 2.4kg Overall length: 360mm: Min. hose size: 10mm 3/8" Sound DBA pressure: 86db(A) Sound Power: 97db(A) Vibration (ISO-8662-14): 2.85 m/s Vibration (ISO-28927-9): 4.8 m/s Vibration K (ISO-28927-9): 2,2 m/s

Air Impact Wrench / Blow Count (max.) 1,600 counts/min