Drills & Screwdrivers Chicago Pneumatic

Note: Image is for illustrative purposes only and may differ from the actual product

Teasing throttle for precise control with triple planetary gearing for smooth operation and extended life. Fitted with a side handle for added comfort and control. Perfect for drilling, hole sawing and cylinder honing. Free Speed: 500 rpm Chuck Size: 13mm (1/2`) Spindle Size: 24mm (3/8`) Free Speed: 500rpm Weight: 1.36kg Length: 197mm Avg. Air Consumption: 85l/m (3 CFM) Air Inlet Thread Size: 1/4 NPTF Minimum Hose Size: 10mm (3/8`) Sound dB(A) Pressure: 96.3 Vibration m/s:

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

Air Impact Wrench / Blow Count (max.) 1,600 counts/min

CP7729 - 3/8" compact impact wrench. Twin hammer clutch. Composite handle and magnesium clutch housing. S2S technology and 3 positive power settings. Full power in reverse up to 415ft.lbs (563Nm). Lightweight and low noise level tool. Maximise operator comfort with an extremely well balanced tool. Most convenient and unique reverse technology in the market. Output drive: 3/8". Free speed: 9,400rpm. Working torque range: 68 - 407Nm. Maximum torque: 563Nm. Average air consumption: 5cfm. Air consumption @ load: 20cfm. Air consumption @ load: 9.4l/s. Air inlet NPTF: 1/4. Sound pressure level: 91dBA. Vibration a (ISO-28927-2): 6.4m/s2. Vibration K (ISO-28927-2): 1.9m/s2. Overall length: 163mm.

Note: Image is for illustrative purposes only and may differ from the actual product

CP789-42 3/8" PISTOL DRILL 4200RPM REVERSIBLE by Chicago Pneumatic

CP789R-26 Teasing throttle for precise control, handle exhaust, needle bearing gearings. Suitable for screwdriving, honing and heavy drilling. 1/4" NPT air inlet thread for 10mm hose, 4cfm* air consumption, 3/8" - 24 spindle thread. Overall length: 178mm. *Based on a 15 second cycle per minute average use.

General purpose needle scaler Rubber sleeve on handle for better comfort Delivered with 2 sets of needles: 19 x 1/8" (3 mm) for standard usage 29 x 5/64 " (2 mm) for finer usage

Note: Image is for illustrative purposes only and may differ from the actual product

Note: Image is for illustrative purposes only and may differ from the actual product

CP749 - 1/2" Heavy Duty Impact Ratchet Oil bath 'spring hammer' double dog clutch mechanism for ultimate power, high durability and reduced vibration. Differential regulator with four positive power settings in forward and ultimate power in reverse. 1/4" npt air inlet thread for 10mm air hose, 16mm bolt capacity, 5cfm* air consumption 625ft/lbs torque. Overall length: 175mm.

CP-789-HR Teasing throttle for precise control, handle exhaust, needle bearing gearings. Suitable for heavy drilling, reaming, hole sawing and jobs requiring a lot of torque. 1/4 NPT air inlet thread for 10mm air hose, 4cfm* air consumption, 3/8 - 24 spindle thread. Overall length: 200mm. *Based on a 15 second cycle per minute average use.