Drills & Screwdrivers

The ground rod driver is made of steel, strong and durable, with high hardness and strength, wear and impact resistant and offer great protection against rust, and can be used for a long time. Our ground rod driver is compatible with almost all of SDS-Max system rotary hammers and hammer drills. Please make sure it fits your tool before purchasing. The drill bit driver is easy to install and disassemble without the assistance of other tools, saving your time and improving working efficiency. The bit driver with a metal wall can withstand greater impact without damage. With this grounding rod driver, you do not need to use sledgehammers and wooden boards to install grounding rods, small fence …

The Laser 4674 41mm 1" Drive Impact Socket is impact quality and manufactured from Chrome Molybdenum.

Impact Sockets Developed For Your Power Tools. Specially designed to resist the stresses from impact, or "Dynapact" tools. Their special steel and heat treatment ensure very high yield strength and wear resistance. All sockets and accessories feature a groove and side-hole to UNI ISO 2725. Locking is ensured by a through-pin and retaining ring (to be ordered separately). Never fit chrome-finished manual sockets to Impact tools.

Impact Sockets Developed For Your Power Tools. Specially designed to resist the stresses from impact, or "Dynapact" tools. Their special steel and heat treatment ensure very high yield strength and wear resistance. All sockets and accessories feature a groove and side-hole to UNI ISO 2725. Locking is ensured by a through-pin and retaining ring (to be ordered separately). Never fit chrome-finished manual sockets Impact tools.

WORGRIP PERCUSSION DRILL 710W.Content:WORGRIP high resistance percussion drill.Automatic chuck with adjustable hole from 1.5 to 13 mm.Suitable for metal and concrete drills up to 13mm, and wood drills up to 30mm.Switch with progressive speed regulator and percussion mode.Auxiliary handle with depth rod.Ergonomic design for optimal grip.Button for changing the direction of rotation.Percussion drill with high power motor.Lock button.Total weight of 1.5 Kg.Specifications:High resistance drill 710W.Quick change chuck.Ergonomic design.Variable speed:0-3200 RPM.Automatic chuck:Ø 13 mm.PVC hard case that includes:depth stop and handle.

Magnetic Non-Slip Drill Bit Non-Slip Electric Screwdriver Bit Elastic Screw Tool Features A total of 10 Phillips screwdriver bits of the same specification can meet your use and replacement needs The bit of the electric screwdriver is made of high-grade alloy steel, the whole is induction hardened, and it has strong wear resistance. strong and sturdy The striped head has a non-slip function and can remove all common sizes of damaged or peeled screws. Suitable for general size and various broken drill bits. Universal chuck suitable for most electric hand drills. Remove damaged screws or drill holes in STEP Light weight, small size and compact design. You can take it with you and use it for …

Diameter 27 mm Easy to use Good product

For use on Hitachi/Tanaka branded outdoor power equipment products brand: HITACHI manufacturer: Hitachi - Outdoor Power International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

One Piece Power Source: Hand Operated International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Product name: Milling cutter extension rod_x000D_Material: carbon steel_x000D_Color: silver_x000D_Weight: about 100-140g_x000D_Size: Refer to the picture description_x000D_Uses: used for lengthening the shank of milling cutters, engraving machine trimming machine accessories._x000D_Package includes: 1PCS* extension rod_x000D_Note:_x000D_1. The starting speed should be slow when in use, and slowly speed up when the rotation is stable. Using too fast according to inertia will cause the machine to shake._x000D_2. Due to manual measurement and different measurement methods, please allow a deviation of 1-3cm._x000D_3. Due to the differences between different monitors, the picture may not reflect …

TUNGSTEN CARBIDE TIP(TCT)Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks.DESIGN WITH CURVEIn a design with curves, the head is good at removing the debris and working efficiently.Features1. Forstner Bit drill clean holes in soft and hardwood.2. Two spurs and centering point to give the perfect solution to repeated, clean and accurate …

With USB: NO Compatible Model: for Compatible Brand/Model: for type: A-010 020 030 Material: plastic+metal colour: Black Package Contents: 1 x For Controller Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

TUNGSTEN CARBIDE TIP(TCT) Tungsten carbide is approximately twice as stiff as steel, with Young"s modulus of approximately 530700 GPa (77,000 to 102,000 psi), and is double the density of steelnearly midway between that of lead and gold. It is comparable with corundum (-Al2O3) in hardness. Tungsten Carbide tip is specially designed to cut through holes cleanly in end grain and thin stock, great for boring concealed hinges and door locks. DESIGN WITH CURVE In a design with curves, the head is good at removing the debris and working efficiently. Features 1. Forstner Bit drill clean holes in soft and hardwood. 2. Two spurs and centering point to give the perfect solution to repeated, clean and …

Description:This drill bits has sharp edges and high drilling efficiency, which will help the drill drill horizontally after drilling.This product is exquisite and compact, very convenient to carry.We use high-quality high-speed steel to create this product, which makes it wear-resistant and rust-proof, and at the same time very beautiful and durable.It is 10cm long, 7cm wide, and 2cm high.It can be drilled, tapped, deburred and counterbored in wood, copper, brass, aluminum, sheet metal and plastic.Item Name: Composite TapsMaterial:High Speed SteelSize:10cmx7cmx2cm/3.94inx2.76inx0.79inNotes:Due to the light and screen setting difference, the item's color may be slightly different from the pictures.…

Specifications:Single flute edge chamfer 90 degree.Great drill accessory for any work shop backed by manufacturer& 39;s lifetime warranty.Heat treated & tempered high-carbon steel with titanium coating for superior cutting power.Use on steel, aluminum & other metals, plastic or wood.Enlarge or countersink holes, deburr edges, 15-degree chamfer.Type: Drill Bit SetQuantity: 7 PcsColor: As the Pictures ShowMaterial: HSS 4241Black Chamfer Drill Body Material: Steel 45Three Pointed Woodworking Drill Bit Diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm/0.12", 0.16", 0.20", 0.24", 0.28", 0.31", 0.39" (Approx.)Chamfer Diameter of 3mm, 4mm, 5mm, 6mm, 7mm Drill Bit: 15.8mm/0.62" (Approx.)Chamfer Diameter …

Specifications:Made of high quality material, it is durable, wear-resistant and has long service life.It is suitable for cutting hard ceramic tiles, ceramics, marble, slate, etc.The exquisite blue appearance of the product looks very beautiful.Item Name: Drill BitsMaterial: DiamondQuantity: 1 : 4Pcs/Set, 2 : 5Pcs/SetPunching Depth: 30mmFeatures: Durable, Hole Opener, Easy to UseTotal Length: 66mm/2.60" (Approx.)1 : Hole Diameter: 6mm/0.24", 8mm/0.31", 10mm/0.39", 12mm/0.47" (Approx.)2 : Hole Diameter: 6mm/0.24", 6mm/0.24", 8mm/0.31", 10mm/0.39", 12mm/0.47" (Approx.)Notes:Due to the light and screen setting difference, the item& 39;s color may be slightly different from the pictures.Please allow …