Computer Cases

Backplane support for 8 port SAS/ SATA drives and 6 Gb/s Mini-SAS SFF-8087
Supports eight 2.5"/3.5" SAS/SATA HDD/SSD
Includes three 80 x 15mm PWM fans
Independent drive status LED. Supports Micro ATX motherboards
Supports four low profile PCI/ PCIe slots. Auto lock handle for easy to fixed the 2U rackmount on the cabinet

Thin Mini-ITX compatible
Super small at 1.4 litres
Include vertical stand holder
Meet VESA Mounting Interface Standard
Easy installation with flip-up top cover

Elegant mix of faux brushed aluminum finish, glossy surface, and mesh for crafting a stylish case design
Upgraded cooling layout fully supports front and rear 120mm fan / radiator
Near limitless support for all components including high-end GPU up to 320mm and CPU cooler up to 165mm
Precisely designed space capable of accommodating various storage devices (5. 25" / 3. 5" / 2. 5") with dual USB 3. 0 ports

Hydraulic bearing for longer life and low operating noise
Suitable for HTPC and SFF enclosures
Material: Polybutylene Terephthalate

Made with vibration-absorbing silicone material for up to 4dBA noise reduction
Ultra fine filter provides great dust reduction properties
Designed to fit tightly with standard 120mm fan mounts

Modern design with premium aluminum exterior
Built-in six hot-swappable 2.5" drive bays with 6Gbps SAS/SATA HDD Backplane*
Vertical layout for stack effect cooling with built-in Air Penetrator fan

Improves cooling performance for any PC case
Designed for cases with fully open expansion slots
The end piece can be either hooked or plugged in
Reusable and easy to install

Adding storage to your Enthoo Series case could not be easier with our drop and lock system. Upgrading storage capacity to your Enthoo cases can now be easier with the SSD brackets. For the Luxe and the Pro, a single slot SSD bracket is available to maximize your storage and a double slot SSD bracket is available for the Enthoo Primo.

6U and 450mm depth
Total load of up to 30kg
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Dust filter in lid and base
Side panel made of tempered glass
1 x USB 3.0

12UF-CONT3

Value for money
Good product with good quality
Durable

Replace the standard BitFenix mesh strips on your current Shinobi or if you are looking to buy a new case you can purchase the Shinobi "core" case which is provided without the BitFenix logo or the mesh strips. Thus allowing you to completely customise your colour scheme for a truely unique looking system.- Material: Plastic- Compatibility: BitFenix Shinobi Midi Tower - Black BitFenix Shinobi Midi Tower - Black Window BitFenix Shinobi Core Midi Tower - Black BitFenix Shinobi Core Midi Tower - Black Window BitFenix Shinobi Core Midi-Tower - White BitFenix Shinobi Core Midi-Tower - White Window

High Airflow PC Gaming Case Mesh Design
GPU Support Up To 380mm
240mm AIO Support At Top, 360mm AIO Support At Front
4xFans Pre-Installed With 6+6 Controller (ARGB LED/PWM System)
CPU Cooler Support Up To 163mm High
PSU Support Up To 200mm
Screwless Tempered Glass Panel
Easy Clean With Removable Dust Filters
3.5" Drive x 2, 2.5" Drive 2+2
Aura SYNC/Mystic Light/RGB Fusion 2.0/Poly Chrome SYNC, USB 3.0 x 2 , USB 2.0 x 1, ARGB LED Control Button

Specifications:- Bahias Internas: 2 x 3´5, 2+2 x 2´5- Conectores: USB 3.0 x 2, USB 2.0 x 1, Audio In/Out- Format: ATX- Format FA: ATX- Medidas: 438 x 210 x 460mm- USB 3.0: Si- Material: Steel, Mesh, Plastic, Tempered Glass- Chassis Dimensions(W x H x D): 438x210x460(mm)/ 17.2x8.2x18.1(inch).- Motherboard Support: Mini-ITX, MicroATX, ATX.- Air Cooler Height Support: 163mm(6.4inch).- VGA Length Support: 380mm(14.9inch).- Cable Management Support: Up to 26mm(1.0inch).- 3.5´´ Drive Bay: 2. 2.5´´ Drive Bay: 2+2.- Fan mounts(Front): 3 x 120mm or 2x 140mm.- Fan mounts(Top): 2x 120mm or 2x 140mm.- Fan mounts(Rear): 1 x 120mm.- Included Cooling Fan(Front): 3 x 120mm Fan.- Included Cooling Fan(Rear): 1 x 12…

Compatible with all ATX size chassis
Aura Sync compatibility lets you customize and sync lighting effects with other compatible hardware.
Aura Sync compatible ARGB lighting shines brightly through a laser-etched ROG logo design.

Strix Styling The ROG Strix G16CH is designed for high performance gameplay, and looking good doing it. With a mesh front panel, a double D-ring handle, headset holder, and subtle RGB lighting accents, the G16CH is a perfect blend of form and function. Next-Gen Power Dominate the battlefield with this high-powered Windows 11 Home gaming monster. Featuring up to an Intel® Core™ i7-13700KF processor and up to an NVIDIA® GeForce RTX™ 4080 GPU, you can have the best of high resolution and high refresh rate gaming, even when all the graphics settings are pumped to the max. For the aspiring content creators or artists, up to 128GB of DDR4 RAM ensures that you can keep all of …

SPACE FOR BIG GPS: The Rebel C20 ITX is designed to accommodate the largest modern RTX-4090 series graphics cards despite its compact form factor.
VERTICAL OR HORIZONTAL ALIGNMENT: As the Rebel C20 ITX can be easily aligned both vertically and horizontally, it fits perfectly anywhere and is suitable even as a compact living room PC or in the home office.
Optimal cooling options. In addition to up to nine fans, radiators up to 360 mm can also be installed in the Rebel C20 ITX for optimal airflow. The RGB version of the case is already equipped with three 120 mm fans with addressable RGB lighting as well as a matching RGB control.
Protected all-round air duct: The Rebel C20 ITX relies on side …

Space for large GPS: The Rebel C20 ITX is designed to accommodate the largest modern graphics cards in the RTX-4090 series despite its compact form factor
VERTICAL OR HORIZONTAL ALIGNMENT: As the Rebel C20 ITX can be easily aligned both vertically and horizontally, it fits perfectly anywhere and is suitable even as a compact living room PC or in the home office.
OPTIMAL COOLING OPTIONS In addition to up to nine fans, radiators up to 360 mm can also be installed in the Rebel C20 ITX for optimal airflow.
Protected all-round air duct: The Rebel C20 ITX relies on side panels with ventilation holes for optimal ventilation of the components. All main air intake points are additionally protected …

The PHANTEKS Glacier R160C is a reservoir that consists of matt acrylic glass and a transparent backplate for custom water cooling. Thanks to the multi-port design and the varied mounting options and fan brackets along with a cut-out for DDC pumps, the Glacier Reservoir is versatile in how it can be installed while also looking extra stylish thanks to the integrated RGB lighting.The PHANTEKS Glacier R160C Reservoir at a Glance:Reservoir in matt acrylic glass with 120ml fill volumeTransparent backplate in acrylic glassOptimised flow designMounting point for DDC pump and coolerDigitally addressable and synchronisable (via motherboard) RGB lighting5x G1/4 thread ports for maximum compatibilityPremium …

Synchronized your gaming station - Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome.. Air flow - 56.45 CFM. Noise level - 30.4 decibels
Analog ARGB controller - low-profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green, teal, blue, White, Purple, and rainbow), 7 LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds.
Rgb LED Ring - Nine 16. 8 million colors addressable LEDs provide balanced lighting coverage and brightness.
9 fan blade …

Upgrade your PC with a PSU shroud for hiding the PSU and the lower HDD slot, also a case fan or SSD can be mounted on top cover as a result.Features- Bracket to mount an SSD on the top is included.- Possibility to install a fan in the top cover.- Modular top covers for individual requirements.- Three years manufacturers warranty.- German product conception, design and quality control.Specifications- Article No. BGA04- EAN code: 4260052186596- Overall dimensions (L x W x H in mm): 499 x 162 x 106- HDD cage compatibility: 1x single HDD cage- Fan mounting option: 1x 120mm- Drives mounting option: 1x SSD- Compatibility with be quiet! cases Dark Base 900, Dark Base Pro 900, Dark Base Pro 900 rev. …

Incl. lateral ventilation slots on VGA level, 90° rotated HDD cage, dust filter behind mesh grid, USB 3.0 port, tool-free mounting of four 3.5 HDDs, lockable (optional) Features:- 1x USB 3.0- 2x USB 2.0- HD Audio- 2 PSU optionsSpecifications:- Case type: Midi-Tower- Motherboard: ATX, Micro-ATX- Drive bays 8,89cm/3.5´´ external: 1- Drive bays 13,34cm/5.25´´ external: 3- Drive bays 8,89cm/3.5´´ internal: 4- PCI slots: 7- Case fans: Included in delivery: 0- Mounting options: 2- Front: - Lateral: 1x 80/120 mm- Back: 1x 80/92 mm- Audio port: HD Audio- USB 2.0 port: 2- USB 3.0 port: 1- Case material: metal- Case dimensions h x w x d: 425 x 180 x 470 mm- Cage dimensions h x w x d: 420 x 180 x 430 m…

⚡ Package included: Individually adressable RGB Case Fan 120mm x 5, Control Hub x1
⚡Enhanced fan frame: Enhanced frame structure, using high-quality hydraulic shaft to reduce friction, reduce turbulent noise, add lubrication and improve efficiency, and extremely high heat dissipation performance- 45.03 CFM & 2.56 mm
⚡Convex designed dual addressable RGB ring offered best lighting effect: convex design kept RGB lighting effect at a optimal point and left tolerance for other RGB components such as, mobo / ram / gpu, water cooling components, and SSD plate
⚡16.8 Million Colors & 18 Independent Controlled LEDs: With the front and rear double rings, total 18 separately controlled RGB LEDs smoothed…