Car Service Station Equipment

This flaring tool kit can be easily used with the pipe in position on the vehicle etc. and can be used on Copper, Brass and Aluminium tubing. Produces male, female and double flares on 5mm to 16mm diameter pipes/tubes. Spare die bar available - Part No. 0360.Dimensions: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"Produces male and female double flaresFlares pipes from 5mm to 16mm diameterSpare die bar available - Part No. 0360Use on Copper, Brass and Aluminium tubing

Tensioner Wrench / Tool Steel

Engine Timing Tool / Tool Steel / Quantity 3 Piece

Engine Timing Tool / Tool Steel

Removes and replaces the exhaust manifold spring clamp on early Volkswagen models fitted with four cylinder water cooled engines.Specifically for use on early Volkswagen models fitted with water cooled 4cyl engines.Removes and installs the manifold spring clamp.Selected steel.Time saver.Packaged in a sliding blister.

Compression Test Adapter / Tool Steel

These timing tools have been introduced specifically for the 2.5 TDi (99-08) engines fitted to Audi: A4 | A6 | A8 | Allroad and Volkswagen: Passat | S4 Turbo | S6 V8 | Sharan TDi. OEM Codes: 3242 | 3458 | 3369.These timing tools have been introduced specifically for the 2.5 TDi (99-08) engines fitted to Audi: A4 | A6 | A8 | Allroad and Volkswagen: Passat | S4 Turbo | S6 V8 | Sharan TDi.OEM Codes: 3242 | 3458 | 3369.Includes crankshaft locking TDC screw, camshaft locking plates and support guides.The support guides allow the front end to be slid forward giving greater access to the front of the engine.For other tools required go to www.lasertools.co.uk/toolpoint.

Timing Belt Tensioner

Oil Filter Wrench / Aluminium

The jaws on this gear puller can be changed to operate with 2 or 3 jaws with internal or external pulling action. Simply unscrew the knurled screw cap to release spring and jaw cover, unhook the jaws and replace as necessary. Replace cover plate and tighten spring with knurled screw. Keep clean and well oiled between uses. Always use eye protection when using this gear puller.The jaws on this gear puller can be changed to operate with 2 or 3 jaws with internal or external pulling action 75mm-180mm.Simply unscrew the knurled screw cap to release spring and jaw cover, unhook the jaws and replace as necessary.Replace cover plate and tighten spring with knurled screw.Keep clean and well oiled between …

Oil Filter Wrench / Aluminium

Quantity 16 Piece

Tool Steel

This kit brings together three of the most useful tensioner locking pins in one kit. These pins are used to lock serpentine belts and cambelts fitted to many of the VAG engines.Set of 3 locking pins for holding the tension on the cambelt and serpentine (auxiliary) belts on VAG enginesOEM Nos. T10115, T40011 - timing belt tension pins and T10060/A - serpentine tension pinUse on tensioners fitted to 1.4/1.9/2.5 TDI PD/TFSIPetrol or dieselPopular tools

Engine Timing Tool

This collection of components has been put together especially for the 1.2 petrol engines found in the VAG range.Volkswagen Lupo and Polo 3 cylinder 6/12v 1.2 litre enginesAlso Seat Cordoba and Ibiza 1.2 petrol engines (2002-2009)OEM Ref. T10123/T10121/T10120Skoda Fabia II, Roomster 1.2P with engine codes AWY/BMD/AZQ/BME/BZG (2002-2010)Storage case supplied

A practical kit allowing the locking of the camshaft and crankshaft for replacement of the timing belt on the Ford range of 1.8 TDDi, TDCi and turbo diesel engines. Used on the Ford diesel engine where the diesel pump is driven by a separate chain drive.A set of engine timing locking tools for the Ford TDDi/TDCi 1.8 engine.Engine codes C9DC, F9DA/B, C9DA/B, BHDA/BBHPA, HCPA.Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller.Supplied in storage case.For setting the timing chain see Part No. 4173.

A cup style oil filter wrench that is suitable for a wide variety of vehicles. Features and Benefits This cup style oil filter is designed for the removal of filters without causing damage to the filter housing The cup style oil filters are suitable for a wide variety of vehicles including: Alfa Romeo (petrol and diesel), Fiat, Seat, Renault, Mercedes-Benz, Volkswagen, Ferrari 348, 355, 360, where Ferrari Filter Purflux 197654 is used

Tensioner Wrench / Tool Steel

For refilling radiators with coolant without introducing air pockets. Complete with adaptors for most modern cars and instructions. Packed in a blow mould case.For refilling radiators with coolant mix without introducing air pockets.Complete with adaptors for most modern cars.Adaptor sizes: 35mm | 39mm | 44mm | 48mm diameter.Adaptors expand by approximately 4mm.Packaged in a blow mould case with instructions.

Three Ignition Coil Pullers for use on Volkswagen and Audi vehicles fitted with direct ignition engines. T-bar handle for ease of use Item A - Two square prong for final output stage - Volkswagen Polo/Golf 1.4, Caddy 1.4 Bora 1.4/1.6 Beetle 1.4 (2003-) Lupo 4cyl(direct injection from 1999-) Passat, Touran 1.6, Phaeton, Transporter T4 Item B - Single sided square for coils with power stage - Volkswagen Golf, Bora, Passat, Sharan, Touareg, Phaeton, Touareg 6cyl (2003-) Transporter T5 6cyl with injection engine (2004-) Item C - Wide, shallow square for coils with final output - Volkswagen Golf, Touran(2004-), Passat (2006-), Eos (2006-) and Audi A3 2.0 (2004-) A6 3.2 (2005-)Three T-bar ignition …

This tool is specifically designed for holding the sprocket/chain in place when disassembling the VP44 Injection Pump and high pressure pump common rail fitted to BMW engines M47 | M47T2 | M47TU | M57 | M57TU on BMW 318D | 320D (E46) 1988-2005 and 318TD | 320TD | 525D | 530D | 530 | 535 (E60-E61) 2000-2006 OEM ref. 13 5 191 | 13 5 192.Specifically designed for holding the sprocket/chain in place when disassembling the VP44 Injection pump and high pressure pump common rail.BMW engines M47 | M47T2 | M47TU | M57 | M57TU on BMW 318D | 320D (E46) 1988-2005 and 318TD | 320TD | 525D | 530D | 530 | 535 (E60-E61) 2000-2006.OEM Code: BMW 13.5.190 (13.5.192 | 13.5.191), Land Rover LRT 12-178.Specifically …

This tool kit has been specifically designed to offer a simple solution for the Audi 2.0 petrol TFSi and FSi enginesFor Audi A3, A4 |A6 | S3 | TT 2.0 (2003-2010).Includes camshaft alignment tool, tensioner wrench and pin.Sold in foam tray with modular packaging.Available also in metal storage case (Part No 4536).Applications and guidance notes included.

Tensioner Wrench / Tool Steel