Car Service Station Equipment

Assists the removal of small bearings for applications including alternators, generators, domestic appliances, power tools and pumps. Reach: 73mm.Spread: 19 - 45mm. Capacity: 1 tonne. Spare leg available - Part No. 0451.

Timing tool set for Renault 16v engines. Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin for Laguna & Safrane 2.0 & 2.5 16v (1996 - 2001) engines. Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin.Laguna | Safrane 2.0 | 2.5 16v 1996-2001 engines. Engine codes: N7U, N7Q. OEM Ref MOT 1340 | 1348 | 1337.

Engine Timing Tool / Tool Steel

Removes and replaces the exhaust manifold spring clamp on early Volkswagen models fitted with four cylinder water cooled engines. Specifically for use on early Volkswagen models fitted with water cooled 4cyl engines.Removes and installs the manifold spring clamp.

Compression Test Adapter / Tool Steel

These timing tools have been introduced specifically for the 2.5 TDi (1999 - 2008) engines. Kit includes crankshaft locking TDC screw, camshaft locking plates and support guides. The support guides allow the front end to be slid forward giving greater access to the front of the engine. These timing tools have been introduced specifically for the 2.5 TDI (99-08) engines fitted to Audi: A4, A6, A8, Allroad and Volkswagen: Passat, S4 Turbo, S6 V8, Sharan TDI.OEM Codes: 3242, 3458, 3369. Includes crankshaft locking TDC screw, camshaft locking plates and support guides. The support guides allow the front end to be slid forward giving greater access to the front of the engine.

Timing belt tensioner for Alfa Romeo V6 24v engines OEM Ref. 1 860 950 000. Applications include: 156/166 2.5/3.0 V6 24v engines (1997-2002) and GTV 2.0 V6 24v engines (1997-2002) with engine codes: 161-02 | 324-01 | 342-01 | 343-01 | 932A.000.Timing belt tensioner for Alfa Romeo V6 24v enginesApplications include: 156/166 2.5/3.0 V6 24v engines (1997-2002) and GTV 2.0 V6 24v engines (1997-2002) with engine codes: 161-02 | 324-01 | 342-01 | 343-01 | 932A.000OEM Ref. 1 860 950 000Made in SheffieldEssential service tool

Oil Filter Wrench / Aluminium

Set of two versatile gear and bearing splitters, drop forged and hardened, for removal of gears/bearings from cylindrical shafts. Size range: set 1 - 30 - 50mm; set 2 - 50 - 75mm.Includes extension rods & carbon steel yoke. IMPORTANT: ensure the force screw is well lubricated with molybdenum disulphide grease before use.

Part of the Laser Tools Oil Filter range of tools.A special aluminium oil filter wrench87mm x 16 flutes3/8"DSpecially for use on BMW 316/318 and Volvo S40/S70 with N40/N45/N46 enginesRemove paper filters without damaging the housing

This kit includes the pneumatic rewind tool (which is also available separately - Part No. 3993) and can be used on left and right hand threaded pistons. Adaptors for the most modern vehicles are included. The pneumatic tool is suitable for all adaptors with either pin type drives or 3/8"D.Pneumatic rewind tool for use with an air gun.Fixed 2 pin drive or 3/8"D.Pneumatic rewind tool for left and right hand threaded pistons.Complete with 15 adaptors.Time saving. Piston seal Part No. 2280.

Tool Steel

Camshaft Locking Tool / Tool Steel

This kit was developed to remove and replace the timing chain or timing belts found on the Ford Duratorq range of engines as well as PSA and Ford 2.0L & 2.4L engines. In addition to the engine timing tools, the kit also includes the special tools required to enable the high pressure diesel pump to be removed without disturbing the timing chain. Timing tool kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0, 2.4.For engines built from 2002 - 2010. Includes camshaft/crankshaft sprocket alignment pin, chain tensioner, fuel pump cover removal tool and fuel injection pump sprocket locking tool. Supplied in foam tray. For 1.4L, 1.5L & 1.6L TDCi, please see Laser …

Engine Timing Tool

The 4083 provides the camshaft locking tools required for the 1200cc 6 and 12 valve engines used in Seat, Skoda and Volkswagen (2002 to 2015). Seat Applications: Cordoba (2002 to 2008), Ibiza (2002 to 2015), Toledo (2012 to 2015).Skoda Applications: Fabia (2002 to 2015), Praktik (2007 to 2015), Rapid (2012 to 2015), Roomster (2006 to 2015). Volkswagen applications include: Fox (2005 to 2012), Polo (2002 to 2014). Engine locking tools for 1.2L, 6 and 12 valve engines. See instructions for engine codes covered.

A practical kit allowing the locking of the camshaft and crankshaft for replacement of the timing belt on the Ford range of 1.8 TDDi, TDCi and turbo diesel engines. Used on the Ford diesel engine where the diesel pump is driven by a separate chain drive. A set of engine timing locking tools for the Ford TDDi/TDCi 1.8 engine.Engine codes C9DC, F9DA/B, C9DA/B, BHDA/BBHPA, HCPA. Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller. Supplied in storage case.

Oil Filter Wrench

Tensioner Wrench / Tool Steel

Timing Tool Set for VAG TDi PD* & TDI CR engines, as used by Audi, Seat, Skoda & Volkswagen vehicles from 2000 to 2017. (*except hydraulic damped tensioner). Set includes crankshaft pulley locking tools for round (T10050) sprockets at 12 O'clock position and oval sprockets (T10100) at 1 O'clock position. Timing Tool Set for VAG 2.0L TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models. Also found on the Ford Galaxy models with ASZ and ASZ1 VAG engines.Includes two versions of Crankshaft Sprocket Locking Tool included. Full OEM reference and guidance notes included with each set. Specifically designed for Belt driven diesel engines.…

Three Ignition Coil Pullers for use on Volkswagen and Audi vehicles fitted with direct ignition engines. T-bar handle for ease of use.Item A: two square prong for final output stage - Volkswagen Polo, Golf 1.4, Caddy 1.4, Bora 1.4 & 1.6, Beetle 1.4 (from 2003), Lupo 4cyl direct injection (from 1999), Passat, Touran 1.6, Phaeton, Transporter T4. Equivalent to OEM T10166. Item B: single sided square for coils with power stage - Volkswagen Golf, Bora, Passat, Sharan, Touareg, Phaeton, Touareg 6cyl (from 2003), Transporter T5 6cyl with injection engine (from 2004). Equivalent to OEM T10095A. Item C: wide, shallow square for coils with final output - Volkswagen Golf, Touran (from 2004), Passat (from …

This tool is specifically designed for holding the sprocket/chain in place when disassembling the VP44 Injection Pump and high pressure pump common rail fitted to BMW and Land Rover engines. Applications: BMW M47, M47T2, M47TU, M57, M57TU on BMW 318D, 320D (E46) (1988 - 2005); 318TD, 320TD, 525D, 530D, 530, 535 (E60-E61) (2000 - 2006).Equivalent to OEM 13.5.190 (13.5.192, 13.5.191), LRT 12-178. Specifically for BMW and Land Rover (TD4).

Tensioner wrench with five adjustable positions for use on many Volkswagen Audi Group models where access is restricted. The tool is designed to offer further access where OEM tools T10020 and Matra V159 are required. 4mm Hex Key required to adjust the positioningMulti purpose tensionerFive adjustable positions for use on many Volkswagen Audi Group modelsThe tool is designed to offer further access where access is restricted4mm Hex Key required to adjust the positioning18mm pin centres/3mm pins

Specialist tool designed to remove and fit PSA exhaust clamps fitted to Citron, Peugeot and Renault vehicles. Designed to remove and fit exhaust clamps.Spring handle and locking mechanism to easily hold the clamp. Moulded handles for easy grip. Suitable for use on Citron, Peugeot and Renault.