Car Additives & Fluids

A special modifier increases the oil viscosity index, which prevents oil from entering the combustion chamber, which in turn reduces soot formation and eliminates exhaust gas smoke.
Anti-wear components minimize wear on engines with any mileage and extend their service life.
Improves the stability and strength of the oil film on the rubbing parts of the engine, which facilitates cold start and reduces starting wear.
Especially effective in severe operating conditions and when oil is diluted with fuel.
Suitable for petrol and diesel engines and all types of engine oils (synthetic, mineral, etc.)

Provides optimum engine performance. Removes deposits on valves in the combustion chamber and prevents new build-up.
Easy to use
Good product for use

Fuel Additive / Menge 0.3 l / Packaging Tin

AdBlue / Menge 10 l / Packaging Canister

Fuel Additive / Menge 0.3 l / Packaging Tin

The perfect solution for cleaning the inside of your engine
Highly effective cleaning additives dissolve sludge and varnish-like pollution, wrapping the solid particles and liquid contaminants
For all commercially available motor oils in petrol and diesel engines with and without diesel particle filters Tested for turbo and catalytic converters Added to warm engine oil before changing the oil
Not for motorcycles with a wet clutches
Flushes out and cleans the inside of the engine
Highly effective cleaning additives dissolve sludge and lacquer formers, envelop solid dirt particles and liquid contaminants and ensure that these are drained along with the waste oil during an oil change
In a …

MOTUL Diesel SYSTEM CLEAN is a cleaning additive designed to be used in all types of Diesel injection systems, with direct or indirect injection, atmospheric or turbocharged, with or without DPF Filter (Diesel Particulate Filter) and with or without SCR (Selective Catalyst) system.reduction).MOTUL diesel SYSTEM CLEAN effectively cleans the dirt and clogging that can appear in the entire Diesel injection system:- Carbonaceous deposits on the injector nozzle - Moisture condensation in the fuel system - Formation of gums in the injection pump - Combustion residues in the chambers and in the intake valves MOTUL diesel SYSTEM CLEAN provides perfect lubrication throughout the cleaning cycle and prevents …

AdBlue / Menge 20 l / Packaging Canister

Oil Additive / Menge 1 l / Packaging Tin

Liqui Moly engine flush plus is a highly effective cleaning fluid which is added to the engine oil prior to an oil change. It removes built up residues and deposits from the engine internals and holds them in suspension in the oil so that when it is drained the unwanted deposits are also drained. This allows the fresh oil to work to its full potential and it also stays cleaner for longer.Removes unwanted deposits, contaminants and residue from engine internalsSimply add to old engine oil before an oil changeExtends engine service lifeAllows fresh engine oil to perform to its maximum and stay cleaner for longerSafe for vehicles fitted with catalytic converters or particulate filters (DPFs)300ml …

Millers Oil CVL (Lead Replacement) - Competition Valve Lubricant from Millers is the unique solution to running race engines on unleaded fuel.The CVL formula provides flame front control. This protects the engine against detonation damage. It is also formulated to lubricates valve seats and typically adds 3 octane to base fuel. Protects against valve seat recessionProtects against the corrosive effects of Ethanol used in E5 and E10 pump fuelAllows engines to run more advanced ignition timing without pre-ignition occuringAllows classic engines to run on unleaded fuelSuitable for leaded or unleaded fuels it is equally effective in modern engines but is only recommended for occasional if your vehicle …

Designed for use in petrol vehicles this high tech fuel additive has been developed specifically to improve acceleration and throttle response under partial engine load. This improves drive-ability and engine smoothness as well as providing better starting. Suitable for all 2 and 4 stroke petrol engines and is safe for use with catalytic converters.Improved acceleration and throttle responseSmoother engine running and better startingEasy to use, simply add to the fuel tankSafe for use with catalytic converters250ml can treats up to 70 litres of fuelTechnical Data Sheet

Designed for use in diesel vehicles this high tech fuel additive has been developed specifically to improve acceleration and throttle response under partial engine load. This improves drive-ability and engine smoothness as well as providing better starting. Suitable for all diesel engines and is safe for use with DPF's.Improved acceleration and throttle responseSmoother engine running and better startingEasy to use, simply add to the fuel tankSafe for use with DPFs250ml can treats up to 70 litres of fuelTechnical Data Sheet

Liqui Moly Pro-Line throttle calve cleaner contains a special active solvent designed to remove the types of contamination and deposits found on petrol engine intakes and throttle valves. By cleaning these areas it can restore lost performance and improve drive-ability and fuel economy.Cleans engine intakes, valves and throttle valvesCan restore lost engine performanceCleans without the need to dismantle engine components, only the intake pipe needs to be removedPro-line throttle valve cleaner removes contaminants such as oil, resin, dried petrol, gum and glue. It is designed to be applied to the intake while the engine is running to ensure the whole intake system is treated for the best results.…

Cera Tec from Liqui Moly is a high tech ceramic based oil additive designed to prevent metal to metal contact and reduce friction and wear, increasing component life and improving efficiency and reducing fuel consumption. Suitable for most 4 stroke petrol and diesel engines and manual transmission use. Safe for use with Catalytic converters and DPFs.Reduces friction increasing component lifeSuitable for engines and manual transmissionsEasy to use, simply add to oilEffective for up to 50,000km (31,000 miles)300ml bottle treats up to 5 litres of oilTechnical Data Sheet

Liqui Moly Gear Protect is a synthetic, high pressure wear protection additive for manual transmissions and axles. It reduces friction and wear improving component life and providing smoother / quieter running with slicker gear shifts. Simply add to the gear oil, for maximum effect it is best to add to new oil.Reduces friction and wear in manual gearboxes and axles (not compatible with plate type LSDs or wet clutches)Provides smoother and quieter running with improved gear shiftingIncreases component lifeAdd to gear oil80ml tube treats up to 2 litres of oilTechnical Data Sheet