Car Additives & Fluids

ZX1 Extralube is a micro oil metal treatment which can be used in engines or gearboxes (manual and automatic*) which is designed to protect and prolong the life of metal surfaces, smoothing and lubric more→ating, reducing friction, therefore saving energy and fuel and reducing harmful emissions.ZX1 Extralube does not change the properties of the oil but chemically bonds to the metal surfaces, modifying the friction surfaces of the metal. It allows the oil to do its job even better and the significant benefits result in: Lower Emissions Increased MPG Excellent cold start protection and anti-wear performance# Protects immediately up to 25,000 miles Impregnates all wearing surfaces Virtually eliminates …

Fuel Additive / Menge 5 l / Packaging Bottle

Fuel Additive / Menge 5 l / Packaging Canister

Swarfega Duck Oil is designed to displace water and prevent corrosion. Swarfega Duck Oil has many uses including: Releasing agent, Light Lubricant, Rust Protector, Penetrating Oil, Electrical Insulat more→or, Damp Starter, Light Degreaser

VP Racing Speed Sauce Plus is a specialised 20/80 pre-mixed water-ethanol injection fluid, created for seamless integration with water/methanol injection kits, providing a significant boost in power a more→nd efficiency directly out of the bottle. Its unique formulation is engineered to maximise engine performance by offering up to 4% more power than methanol-based alternatives, and with the correct tuning, it can unlock up to 15% additional horsepower and torque over standard configurations.Here's a closer look at what makes Speed Sauce Plus stand out:High Octane Delivery: With an ethanol content boasting a >115 octane rating, this injection fluid significantly increases fuel octane when it's

WD-40 gets under dirt, marks and grease making it easy to wipe away. It also dissolves adhesives, allowing easy removal of labels, tape, and stickers. WD-40 protects metal surfaces with corrosion-resi more→stant ingredients to shield against moisture and other corrosive elements. WD-40's lubricating ingredients are widely dispersed and hold firmly to all moving parts. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts

Specially formulated for splash feed air compressors and suitable for most of our direct drive machines (always check handbook to confirm).

Recommended by leading camshaft manufacturers, this unique extreme pressure lube dissolves completely in oil without clogging oil passageways or plugging oil filters. Proven to cling to and protect su more→rfaces during initial start-up, Driven Engine Assembly Grease delivers protection you can count on. Apply to cams and lifters for break-in protection. It can also be used on distributor gears, rocker shafts, rocker tips, pushrod tips, wrist pins and valve guides. Combined with BR series break-in oils provides proven protection during break-in.

5 Litre HP 32 Hydraulic Oil - Ideal for use with all hydraulic equipment.

5 litres of Long Life ISO 100 compressor oil, manufactured for use with a wide range of compressors including the Clarke Tiger range.

Torco s Unleaded Accelerator is not just a fuel additive, it is race fuel concentrate. While possessing many of the same additives as full race fuel, Unleaded Accelerator uses a blend of components th more→at will transform regular fuel from the pump to closely resemble race fuel. It also reduces the end burn temperature which enables fuel to burn more effectively thus provided better combustion and ultimately more power from the engine.When mixed at a ratio of 40:1 with regular unleaded pump fuel, an efficient octane rating of 102 is achievable. However you can also mix it at a ratio of 20:1 which will provide a much higher rating of 105. Supplied as a 945ml bottle.Safe to use with catalytic

A quality motor oil suitable for 4 stroke petrol engines

VSPe Power Plus is the replacement for the popular VSP from Millers Oils. VSPe Power Plus is an all in one fuel additive for classic / historic vehicles with engines which were designed to run on 4 st more→ar leaded fuel. It has additives which are designed to combat the 3 main problems which occur when running older engines on unleaded fuel. Lead Replacement - To prevent valve seat recession Octane Booster - To raise the fuel octane number by 2 (20 points) to prevent detonation. Ethanol Protection - Combats the adverse effects of ethanol in E5 and E10 unleaded fuels including corrosion and degradation of rubber products in the fuel system.VSPe Power Plus also has additives to prevent fuel system cor…

Clear silicone grease for use on UPVC push-fit soil and waste drainage and insulation of electrical terminals.

Fuel Additive / Menge 1 l / Packaging Tin

Fuel Additive / Menge 1 l / Packaging Tin

Specially formulated for use with all Clarke heavy duty industrial screw air compressors.

This easy to use tool and bit cleaner comes in a handy 532ml spray bottle and is the ideal cleaning solution for grubby tools and bits. The bio-degradable, non-toxic formula has unique properties whic more→h break the molecular bond and lifts the dirt from the tool, as opposed to eating away the dirt like citrus cleaners and other chemicals. The spray is ideal for various tools and bits including saw blades, wrenches, files and drill bits. Not only this, the solution also acts as a high grade lubricant and provides protection against corrosion, meaning this spray not only cleans your tools, it extends their lifespan too.

Oil Additive / Menge 0.15 l / Packaging Tube

Oil Additive / Menge 0.5 l / Packaging Tin

Oil Additive / Menge 1 l / Packaging Tin

PL500 V-TUF PRESSURE LUBE, formerly PL100, can be used to replace or top up pump oil or engine oil in high pressure washer pumps and engines. This 500ml package of PL500 is the most popular choice of more→pressure washer oil. In fact it performs better than oil. V-TUF PRESSURE Lube improves performance whilst reducing vibration, excessive operating temperature and provides long-term storage protection for metal surfaces. MSM (Metal Surface Modifier) bonds to the metal bearing surface at the molecular level, dramatically reducing friction, protecting against abrasion, humidity and thermal damage. PRESSURE Lube bonds on to metal surfaces at temperatures above 50°C creating a mono-molecular