Parts for Drones & RC models for

ZLL SG906/SG906 PRO/SG906 PRO 2/SG906 MAX RC Drone Quadcopter Spare Parts CW CCW Foldable Propeller

ZLL SG906 MAX Obstacle Avoidance Spare Parts Laser Obstacle Avoider

Drone Filter / Filter Type ND Filter / For DJI Inspire 1 / Aperture Filter Level -2 / 4 g

Drone Filter / Filter Type ND Filter / For DJI Phantom 4 Pro

Drone Filter / Filter Type ND Filter / For DJI Phantom 4 Pro / Aperture Filter Level -4 / 5 g

Drone Filter / Filter Type ND Filter / For DJI Mavic Pro

Drone Filter / Filter Type ND Filter / For DJI Mavic Pro / Aperture Filter Level -5 / 1 g

Drone Filter / Filter Type ND Filter / For DJI Mavic Pro / Aperture Filter Level -4 / 1 g

Drone Filter / Filter Type ND Filter / For Yuneec Typhoon H / Aperture Filter Level -4 / 4 g

Description: 100% brand new and high quality 5 channel 27Mhz Remote Control Unit receiver board+remote control very small size it can control 3 motors, 2 motors can mover two directions, 1 motor can move 1 direction long distance receiver board size:app. 4.7 x 4CM control distance:10-20 meter(open area) Frequency:27Mhz remote control: AA batteryx4 (not included ) receiver board input:4-7.2v receiver board output:4-7.2v Quantity: 1 set Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual

A throttle quadrant copy with an ergonomic design, which was based on the flight control of the famous Airbus company Equipped with 2 navigation axes and 16 buttons and controls (detents, switches, and thrust reversers), it enables a variety of controls during take-off, during flight, during landings, and on the ground. The mechanical selectors disable detent and thrust reversers (switch to linear axes mode) and allow flexible control of all types of aircraft. Non-contact magnetic sensor technology that does not use a potential meter enables permanent life and maximum accuracy. Compatible with the Thrustmaster T.Flight Rudder Pedals (TFRP) and Thrustmaster Pendular Rudder (TPR) ladder

TRF421 GEAR DIFSET Please be sure to take a look at the product's more than a minute's reading and what to look out for before you make a product! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

One make up motor for the off road category, such as Gravelhund, and the DARK IMPACT, which are very well received as an easy to start off road car, are now available. Although it is a off road races, it is easy to use and is set to exude just the right level of power. A cover is also included to stop the ingest of the Gravels on the road with lots of Gravels. Great for all off road car applications. Can also be used on-road Please be sure to take a look at the product information below and the things to keep in mind when making a order! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

For boys

Set Contents Main Body This product requires assembly (An adhesive may be necessary.) The image is being painted for the shooting.

Product model number: 300054114 Type: Single Packing size: 4.2×10.0×7.2 (cm) Recommended age: 15 years and up Please be sure to check the product information below and the precautions when purchasing before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

[Torque type high performance motor developed for electric RC cars] This is a high torque motor suitable for low speed courses and enduring races. Rebuilt-double type that can be disintegrated and rebuilt. The brush uses a standard type, and is equipped with a terminal heatsync or a tip-type capacitor that can be taken off with one tap. The end clock, equipped with a brush damper, has a blue anodised surface. [Basic specifications] Suitable voltage: 7.2V to 8.4V, torque at maximum performance: 500 gf/cm (at 7.2 V), rotation speed at no load: 26 500 rpm (at 7.2 V), 23 turn single coil Be sure to check the product details below and the points to keep in mind when buying before buying!

[This part is useful for the performance and settings of RC cars] Use it in place of the standard device's GEAR DIFF. In particular, it is used on the rear side, which makes the rear hold more stable. The 3mm ball bore on the Ring Gears has a grease chunk to hold back grease pieces. [Standard Specs] Set includes a deep jointA, a diff jointB, a jointcup, a ball diff, a Ring Gears (39T), a Bevel Pinnion Gears (for 39T), a 3 mm/1/16 inch steel ball, and 850/1280. Material: metal Be sure to check the product details below and the points to keep in mind when you buy before you buy! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the

An option part that can be used in exchange for a standard resin-based damper stay in the package to make it more secure and the damper works. Blue anodised ALUMINUM Use the before and after set, 1 set for 1 car. Please be sure to take a look at the product's full information below and the things to keep in mind when making your order! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Advance angle adjustment is possible and can be used for a wide range of purposes from on-road to off-road. Adopts a banana pin type cord that is convenient for removing and maintaining the motor. Recommended chassis: 1/10 Tamiya touring car, M chassis, buggy car (excluding reproduction products). *Cannot be used for big tires, CR-01 chassis, CC-01 chassis, twin motors, trailer trucks, TB-03VDS, reprint machines such as Fighting Buggy 2014, F104 chassis, F201 chassis, etc. *If installing on the TT-02 chassis, please remove D4 and D5 parts. Brushless motors have become the designated motors from the 2015 season at the Tamiya Grand Prix and Challenge Cup held all over the country. Target

The advance can be adjusted and can be used widely from on-road to offroad. Uses a banana-pin type cord that is easy to separate and manage the motor. Recommended Chassis:1/10 Tamiya Touring Car, M Chassis/buggy Car (excluding reprint products). *Cannot be used on Big Tyre, CR-01 Chassis/CC-01 Chassis/twin motor, reprint machines such as the TB-03 VDS, and the F201 Chassis/F201 Chassis/etc., such as the VDS, and the 2014 FIGHTING BUGGY. *When installing on the TT-02 chassis—please separate the D4 and D5 components. A brassless motor that has been designated since the 2015 season for the Tamiya Grand Prix or Challenge Cup, which is held all over the country. target age: children Be

TARGET SEX: boy Main Country of origin: Japan Please be sure to take a look at the product's more than a few things to be sure to look at before you make a deal! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Product Features Brand: TAMIYA Custom Bundle: No Year: 2018 Modified Item: No