Headphone Amplifiers

Multiple Audio In: Support HD USB Audio input up to DSD512 32bit/PCM768kHz. Support HD Coaxial Optical Input, can be connected to desktop CDs, HiFi players, digital turntables, etc. Bluetooth input formats AAC, SBC, APTX, APTX_LL, APTX_HD, LDAC Dual Chip Ability: Precise restore recording scene. Equip 2 ES9038Q2M DAC chip to process digital music signals at the same time, making the THD+N reduced to 0.00065%. Support DSD format to DSD256. Support PCM format to 32bit/384KHz. Support MQA Render AES Input/Output: AES balanced input and 4.4mm balanced output, which is from digital input to headphone output are all balanced circuits, Let your balanced headphones have higher crosstalk and wider

DAC/Headphone Amplifier/Preamp

High-quality DAC - The THD + N of A30 Pro is no higher than 0.00006%, which means the A30 Pro accurately restores 99.99994% of the original sound, what you get is what you input Pushing The Envelope - A30 Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended performance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance Thoughtful Design - Since then, buying headphones does not have to consider whether the plug matches the headphone amplifier, because the A30 Pro already provides you all in a compact body, including 4-PIN-XLR, 4.4mm, 6.35mm ≥250Ω = Cass A - A30

THXAAA-888 Headphone Amplfier with THX AAA Technology 6 Watts into 16 Ohm,3 Watts into 32 Ohm Headphones with lowest THD+N 0.1Hz to 500kHz(-3dB) Frequency Response Fully Protection with DC, Over-Voltage, Over-Current, Short-Circuit and Thermal Protection on Headphone Amplifier Balanced Stereo Headphone Output. Balanced Stereo Line Input

Replacement Tube for InLine AmpUSB HiFi DSD Headphone Tube Amplifier

Supports DSD128 5.6 MHz playback Supports PCM 384KHz/32bit playback Supports DSD native or DoP (DSD over PCM) Asynchronous transfer mode SNR: approx. 110 dB (A weight) Max. Headphone output power (at 1 kHz and single channel): approx. 210 mW / 16 Ohm and approx. 190 mW / 32 ohms Headphone impedance supported: 16-600 ohms

The DL400 features 4 ultra-low-distortion Precision Linear Feedback Circuit (PLFC) headphone amplifier circuits in fully balanced design with an output power of up to 6W x 2an 16 Ohm and up to 3W x 2 at 32Ohm. With two headphone jacks, a 6.35 mm headphone jack and a balanced 4.4 mm headphone jack on the front, as well as an I²S input and an XLR output. New third generation XMOSXU-316, PCM playback support up to 32bit/768kHz, DSD support up to DSD512, USB, optical, coaxial and 2S support DSD transmission. Coaxial and optical supports DOP64. Adopted DAC chip ES9039MSPRO, supports MQA decoding, supports MQA-CD. integrated low-noise power processing, while improving energy efficiency, low power c…

The design uses the latest high quality sound technology and a fully separated digital/analog solution to achieve a sound experience as if you were on site. In conjunction with the AK4191EQ, the AK4499EXEQ is the ideal analog conversion solution for reproducing high-resolution sound sources. The new third generation XMOS XU-316 supports PCM up to 32bit/768kHz. DSD supports DSD512, USB, optical, coaxial and I2S support DSD transmission. Coaxial and optical DOP64 is supported. Filtering is a step that converts PCM digital audio into an analog signal. It mainly affects high-frequency signals after about 20 kHz. The 6 modes of the DL300 are shown in the picture below. On the front there is a …

AK4499EX + AK4191 chip: It has excellent noise and THD properties and is a new stereo chip specially developed by AKM. Synchronous start of the AK4191 and AK4499EX with the use of the analog signal can be easily achieved and analog signals are completely separated from a variety of tiny sound details online. Headphones two gain adjustable high performance: in the front class, 6.35 mm headphone jack and 4.4 mm headphone jack, internal use of PLFC headphone amplifier circuit, provide excellent performance. 6 types of PCM filters, 4 types of tones available: filter is a step to convert PCM digital audio into analogue signal. It mainly works on high frequency signals after about 20 kHz. PCM playback …

【ESS High-end Decoder Chip】 DL200 adopts chip ES9039Q2M, which is a high-performance, 2-channel decoder chip. Utilizes the latest technology and advanced architecture. Provides a level of performance that meets the needs of demanding audiophiles and professional audio enthusiasts. 【Dual Mode USB2.0/1.1】 2 different USB modes can be switched within the menu. Using USB2.0, driver installation is required to support 768kHz/32bit high bit rate audio files. Using USB1.1 mode can support 96kHz/24bit bit rate audio files without driver, and directly connect to many devices to output audio. It can be connected to game consoles, TVs, etc. 【High Power Output Multi-Output Interface】 Provides 6.35mm singl…

High Performance MQA DAC Amplifier: Harnessing the audio decoding chipset, the CS43131 from Cirrus Logic, SMSL DS100 boasts meticulously designed circuitry that elevates its performance to an astonishing distortion level of 0.00017% (-115dB)! It provides an unparalleled music experience and brings you into a new realm of music enjoyment. Supports MQA/MAQ-CD Decoding. Restore the most authentic sound in the recording studio. USB DAC XMOS XU-316 PCM support 32bit/768kHz & DSD512:Powering USB decoder is the brand-new third-generation XMOS XU-316, which boasts PCM support up to 32bit/768kHz and DSD support reaching DSD512. This ensures that your audio experience is as pristine and lossless as

【Four core decoding with excellent sound effects】The SMSL DL100 uses four CS43131 chips. Can sample PCM digital audio directly at 32bit/768kHz without the need to lower the sampling rate downwards. It also supports native DSD playback of DSD256 without the need for conversion. Fiber optic and coaxial inputs support DOP64. 【Ear amplifier circuit newly upgraded】The 6.35mm headphone jack and 4.4mm headphone jack are provided on the front panel using self-developed independent amplification circuits, with excellent performance. Compared to the previous generation CS43131 product, the output power has increased by about 16 times at 3002. 【Dual mode USB 2.0/1.1】Connecting game consoles is more conv…

【Small size and high performance】The SMSL is a versatile decoder with great versatility and high-quality sound reproduction. It is compatible with DAC and headphone amplifier. It uses 2 Cirrus Logic audio decoding chips with a distortion as low as 0.00015% (116dB). With its carefully designed structure, your music can be clearly conveyed to you. Less distortion, more enjoyment. 【Powerful headphone amplifier】This mini headphone amplifier has a 3.5mm headphone jack and a 4.4 balanced headphone jack. The headphone amplifier output power is up to 500mW@16Ω, which can easily handle most headphones on the market. 【Support USB: Wide Range of Scenarios】When this USB DAC plays music,

Support DSD256 hard decoding and PCM 32bit/384kHz: The data status indicator lights up when playing music. The D10 supports DSD256 hard decoding and PCM 32bit/384kHz hi-res specifications to achieve highly reproduce sound! 3.5+4.4 Balanced Dual Jack: The output power of headphone amplifier is up to 500mW@160, suitable for most headphones! Cirrus Logic DAC Chip 2xCS43131: Using 2 pieces of audio DAC chip CS43131 of Cirrus Logic with well-designed circuit,excellent performance,sounds more pure! Minimalistic Design Clear at A Glance: Transparent window and textured aluminum housing matched, the internal chip is visible! Side volume button is convenient to operate and control. 12-month warranty,…

S.M.S.L D10 is a mini audio decoder ear amplifier that uses 2 Cirrus Logic audio decoding chips, combined with carefully designed circuits, with excellent performance indicators and purer sound! D10 supports DSD256 hardware decoding and PCM 32bit/384kHz high-resolution specifications. When playing music, the data status indicator light will light up, achieving a high degree of sound restoration! 3.5mm headphone jack and 4.4mm balanced jack, dual port dual convenience, ear amplifier output power up to 500mW@16 Ω, can easily handle most headphones on the market. Multiple usage scenarios allow for easy connection between computers and mobile phones. It is compatible with Windows 7/8/81/10/11 (…

Why choose C200? SMSL C200 offers a more natural tonality, prioritizing a balanced sound signature. Equipped with 4.4 mm&6.35mm headphone outputs and a TRS output. Support PS4/PS5. Enhanced Sound Clarity : Equipped with an ES9038Q2M DAC chip and 4*OPA1612 opamps, the C200 delivers warm and smooth sound while retaining intricate details, allowing you to hear micro details and subtle nuances in your favourite music files. Versatile Connectivity : The C200 offers multiple input options, including USB, Optical Toslink, Coaxial SPDIF, and Bluetooth 5.1 with LDAC support. This enables seamless compatibility with various music sources, from phones and tablets to game consoles like PS4, and PS5.

【 High Power Output Function 】️ Headphone Amplifiers unleashes ultra-high power output. With 16 ohms, it delivers up to 15W, and at 32 ohms, it reaches 7.5W.Its distortion rate is staggeringly low at 0.00006%, while the SNR stands at an impressive 133dB. Ensuring an immersive listening experience. 【 High & Medium & Low 3 Gears Gain Switchable Gain Control]️H400 provides 3 Gears Gain switchable gain control function to meet the personalized needs of different users. The low gain setting is specially optimized for IEM (in-ear monitor headphones).High-sensitivity in-ear headphones, high-gain drive full-size over-ear headphones. It is suitable for both professional musicians and

【High Power Output Function 】 Headphone Amplifiers unleashes ultra-high power output. With 16 ohms, it delivers up to 15W, and at 32 ohms, it reaches 7.5W.Its distortion rate is staggeringly low at 0.00006%, while the SNR stands at an impressive 133dB. Ensuring an immersive listening experience. 【 High & Medium & Low 3 Gears Gain Switchable Gain Control】H400 provides 3 Gears Gain switchable gain control function to meet the personalized needs of different users. The low gain setting is specially optimized for IEM (in-ear monitor headphones).High-sensitivity in-ear headphones, high-gain drive full-size over-ear headphones. It is suitable for both professional musicians and ordinary music lovers. …

Fully balanced discrete component design, with ultra high power output. The distortion is as low as (THD+N) 0.00006%, and the signal-to-noise ratio is as high as 133dB! High output power, with an output power of 15W at 16 ohms and 7.5W at 32 ohms. Use electronic relays to control volume and eliminate channel deviation! High, medium, and low levels can switch gain control, and low gain is specifically optimized for IEM. The front-end output function can be used as a Hi End front-end. Ultra compact design, perfect for desktop headphone systems. High precision low-temperature drift resistance, performance not affected by temperature. High quality relays and no impact sound design. Frequency response …

SMSL H400 S.M.S.L H400 Headphone amplifier Headphone amp smsl headphone amplifier

Fully Balanced Design: 4 ultra-low distortion precision linear feedback circuits (PLFC), ensures original sound reproduction. High output power, Hifi amp can drive 16-ohm output power up to 10W, and 32 ohms up to 5W. Its frequency response is 20Hz to 100kHz(-0.5dB) frequency response. Delivers impressive audio performance to bring your music to lifelike. Low Noise: The audio amplifier's specially designed volume potentiometer greatly reduces channel deviation. Each channel uses 32 low-noise op amps in parallel, a total of 64 op amp ICs are installed for the power amplifier. The distortion is as low as 0.00006%, and the A-WTD is as low as 133dB. Ensures optimal signal integrity and minimal distortion.…

Features: Made for enthusiasts, it can reduce pit noises, make the turntable rotate more stably, and improve music performances. Equipped with non-slip cotton pad, shock absorption, can reduce the friction between the metal and the record, not easy to damage the recorder. Made of 304 stainless steel/carbon fiber materials, which can effectively keep the discs from shaking and reduce vibration. Suitable for vinyl record players, LP record players, phonographs, stereo record players. Well-packaged, small in size and lightweight, easy to carry. Specifications: Material: 304 stainless steel/carbon fiber Diameter: Approx. 52.5mm/2.06inch Height: Approx. 17mm/0.66inch Hole Diameter: Approx.…

The ZHA-4 splits a single stereo headphone output into four separate powered 1/8˝ headphone jacks, each with their own volume and mute control. Perfect for bands, podcasts, productions, and more. Two AA batteries provide hours of portable power. For longer sessions, connect the USB-C port to a powerbank or plug directly into the wall. Height (cm): 7.0 Width (cm): 13.0 Frequency Range: 10 Hz - 50 kHz Impedance: 47 Ohm Battery Operation: Yes Number of Channels: 4 Power Supply: USB and Battery Battery Type: AA USB: Yes Depth (cm): 5.2 Package Contents: Manual;USB-C Charging Cable Inputs: Jack 3.5 mm TRS Outputs: Jack 3,5 mm TRS Weight (g): 180.0 Display: No Controls: Volume Colour: Black Made i…