Bicycle Parts Creek

Replacement hoods for Cane Creek Road Brake Levers. These hoods will also fit Modolo, Dia-Compe, some old Shimano levers, Weimann & Mafac levers.These are to fit levers with overhead cables, not the modern style where the cable exits at the rear.

The10 Serieshas the look and feel of Cane Creek's class leading 40 Series headsets with simpler machining and more economical materials. Designed with the upgrade path in mind, the 10-Series shares the internal geometry of Cane Creek's higher-end headsets and, as a result, replacement and upgrade parts are readily available. Machined from 6061 T-6 aluminium Sealed, lightweight polymer crown race Lightweight polymer compression ring Interlok spacer compatible Internal parts are cross-compatible across the 10, 40 and 110-series Upper / Lower Stack: 16 / 12mm Colour: Black Weight: 39.28g

The sensible choice for Cyclocross bikes. Designed to work in-line with traditional drop bar shifter/levers to provide an additional braking control position on the top of handlebars. Compatible with calliper or cantilever brakes and available in two sizes to fit 26.0mm and 31.8mm handlebars. All Cane Creek components feature subtle refinements that show their mettle in the most demanding conditions, from one season to the next. Cane Creek products deliver immediately noticeable improvements in ride quality and performance. Cane Creek brakes and levers are honest upgrades – not just different, but different for the right reasons. Cane Creek has a long, rich history in the evolution of

The sensible choice for Cyclocross bikes. Designed to work in-line with traditional drop bar shifter/levers to provide an additional braking control position on the top of handlebars. Compatible with calliper or cantilever brakes and available in two sizes to fit 26.0mm and 31.8mm handlebars. All Cane Creek components feature subtle refinements that show their mettle in the most demanding conditions, from one season to the next. Cane Creek products deliver immediately noticeable improvements in ride quality and performance. Cane Creek brakes and levers are honest upgrades – not just different, but different for the right reasons. Cane Creek has a long, rich history in the evolution of

The40-Seriessets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the40-Seriesincorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's40-Seriesoffers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC. This is a drop fit or integrated headset top half. There is no cup, the bearings simply "drop" into the frame. For 1 1/8th Steerers.

The40-Seriessets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the40-Seriesincorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's40-Seriesoffers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC. Intergrated 1 1/8" Upper Race with 15mm stack.

TheCane Creek 40 IS42/28.6 Headsetis the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value. Cane Creek 40 IS42/28.6 Headset Features Machined from 6061 T-6 Aluminium Innovative Clip-Seal completely seals the top assembly and captures the compression ring to reduce the numberof loose parts High quality, low friction face-seals Dependable black oxide, sealed bearings Interlock spacer compatible Internal parts are cross -compatible across the 10, 40 and 110-series

The10 Serieshas the look and feel of Cane Creek's class leading 40 Series headsets with simpler machining and more economical materials. Designed with the upgrade path in mind, the 10-Series shares the internal geometry of Cane Creek's higher-end headsets and, as a result, replacement and upgrade parts are readily available. Machined from 6061 T-6 aluminium Sealed, lightweight polymer crown race Lightweight polymer compression ring Interlok spacer compatible Internal parts are cross-compatible across the 10, 40 and 110-series Upper / Lower Stack: 16 / 12mm Colour: Black Weight: 76.57g

The40-Seriessets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the40-Seriesincorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's40-Seriesoffers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC. Cane Creek 40-series ZS Upper Cup isdesigned to go into frames with a internal diameter of 44mm. And accepts 1 1/8th or Tapered Steerers.

The40-Seriessets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the40-Seriesincorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's40-Seriesoffers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC. Cane Creek 40-series ZS-56 Lower Cup 1.5>1-1/8": 40-Series Solutions: separate top and bottom headset cup assemblies for tapered, reducer and

The10 Serieshas the look and feel of Cane Creek's class leading 40 Series headsets with simpler machining and more economical materials. Designed with the upgrade path in mind, the 10-Series shares the internal geometry of Cane Creek's higher-end headsets and, as a result, replacement and upgrade parts are readily available. Machined from 6061 T-6 aluminium Sealed, lightweight polymer crown race Lightweight polymer compression ring Interlok spacer compatible Internal parts are cross-compatible across the 10, 40 and 110-series Upper / Lower Stack: 16 / 12mm Colour: Black Weight: 88.2g

The40-Seriessets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the40-Seriesincorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's40-Seriesoffers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC.

The40-Seriessets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the40-Seriesincorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's40-Seriesoffers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC. Cane Creek 40-series Upper ZS49/28.6: 40-Series Solutions: separate top and bottom headset cup assemblies for tapered, reducer and conversion

The 40-Series is the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value.Cane Creek Headset 40 FeaturesMachined from 6061 T-6 AluminiumHigh quality, low friction face-sealsDurable steel crown raceDependable ZN40 sealed bearingsInternal parts are cross -compatible across the 10, 40 and 110-series

The 10 Series has the look and feel of Cane Creek's class leading 40 Series headsets with simpler machining and more economical materials. Designed with the upgrade path in mind, the 10-Series shares the internal geometry of Cane Creek's higher-end headsets and, as a result, replacement and upgrade parts are readily available. Machined from 6061 T-6 aluminium Sealed, lightweight polymer crown race Lightweight polymer compression ring Interlok spacer compatible Internal parts are cross-compatible across the 10, 40 and 110-series Upper / Lower Stack: 16 / 12mm Colour: Black Weight: 88.2g

The 40-Series sets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the 40-Series incorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's 40-Series offers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC.

Cane Creek 40 IS 41mm 1 1/8 Headset Features The all-new 40-Series is the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value. Machined from 6061 T-6 Aluminium Innovative Clip-Seal completely seals the top assembly and captures the compression ring to reduce the numberof loose parts High quality, low friction face-seals Durable steel crown race Dependable black oxide, sealed bearings Interlock spacer compatible Upper/Lower stack: 9/1mm Colour: Black Weight: 71g

The 40-Series sets the standard forperformance, durability and value. Drawing from the Premium 110-Series Design, the 40-Series incorporates all the features necessary for a durable, light-weight, long-lasting headset. To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's 40-Series offers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC.

CANE CREEK 40 SERIES - STRAIGHTThe 40-Series is the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value. Suitable for any type of bike including road, gravel MTB.The new ZN40 bearings are a zinc-coated, machined steel cartridge bearing with hardened steel balls. The new material is much more corrosion-resistant, which vastly increases the longevity of the 40 series headsetsCane Creek 40 Zerostack Headset FeaturesMachined from 6061 T-6 AluminiumInnovative Clip-Seal completely seals the top assembly and captures the compression

The 40-Series is the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value. Suitable for any type of bike including road, gravel MTB.The new ZN40 bearings are a zinc-coated, machined steel cartridge bearing with hardened steel balls. The new material is much more corrosion-resistant, which vastly increases the longevity of the 40 series headsetsCane Creek 40 Headset FeaturesMachined from 6061 T-6 AluminiumInnovative Clip-Seal completely seals the top assembly and captures the compression ring to reduce the numberof loose partsHigh

Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of our 110-Series, they did just that — choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset. The 110-Series offers the widest array of configurations available in a premium headset. With the flexibility to purchase complete assemblies or separateTops and Bottoms, the 110-Series offers a premiumsolution for nearly all straight and tapered configurations on the market today. From Integrated (IS) Tops to External Cup (EC) Conversion Bottoms and everything in between, you can mix and match your

The all-new 40-series is the work-horse of cane creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value.Machined from 6061 t-6 aluminiuminnovative clip-seal completely seals the top assembly and captures the compression ring to reduce the numberof loose partshigh quality, low friction face-sealsdurable steel crown racedependable black oxide, sealed bearingsinterlock spacer compatibleupper/lower stack: 8/12mmcolour: blackweight: 190g

TheCane Creek Angleset Tapered transforms the way you ride, with simply astounding angle possibilities you can customise your riding adjustment to ensure you are always riding the way you want to! Featuring a super easy to adjust head angle position you can alter your setup on the Cane Creek Angleset with either steeper or slacker adjustments to create a much more attacking or laxer riding style thanks to the geometry! The unique (patent-pending) design of the Cane Creek Angleset Tapered ensures that the headset is able to meet most head-tube standards, another fantastic feature is that you can always ensure that you are aligned perfectly thanks to the self-adjusting design for the bearings