Drills & Screwdrivers

Heavy duty 16 speed bench drill with a 19mm drilling capacity. Designed for engineering and fabrication workshops. The square table is fitted with a heavy duty smoothly operated rack and pinion for easy adjustment. Fitted with a No - Volt safety release switch, depth stop and chuck guard. Manufactured with an Aluminium motor casing and lockable pulley cover. Supplied with a BS approved non - rewireable moulded plug and 1.8m (approx.) cable.

Made in Germany: Hazet is one of the leading manufacturers of quality tools for professional use and has more than 155 years of experience in development and production.
Item Package Dimensions (L x B x H) in cm: 24.9 x 5.0 x 17.7
Model Number: 9030N-1

Hammer drill, roto-stop chisel and normal drill modes. 3.5J impact force and 4000 impacts per minute. Built-in safety clutch. 800rpm maximum speed. Masonry drilling capacity: 26mm. Includes 13mm keyed chuck; chuck key; SDS Plus arbor and screw; 6, 8 and 10mm SDS Plus masonry drill bits; flat chisel; point chisel; depth stop; pin spanner; dust guard and pot of grease. Supplied in durable case for easy transportation and storage. Weight 4.6kg.

Mains-powered impact wrench with a high torque output of 350Nm, ideal for freeing tight bolts and fastening to high torque values. Precise user control with a variable speed trigger, forward/reverse selector and vibration reducing soft-grip handle. ½” square drive for compatibility with medium to large socket bits. Includes 17, 19, 21 and 23mm hardened steel sockets.

Air Impact Wrench / 1/2 inch external square / Soft Handle / 1-speed / 1,690 Nm Max. Torque / 128 l/ min Air Consumption / 6.3 bar Air Pressure

Air Impact Wrench / 3/4 inch external square / Soft Handle / 931 Nm Max. Torque / 178 l/ min Air Consumption

Bench Drill / Mains Operation / 10.3 kg / 350 Watt / 2-speed

The Batavia MAXXPACK 2 Mode SDS Drill has been developed to cope with heavier drilling applications which are normally associated with a mains powered machine. It has 2 modes normal drilling and hammer drilling and takes SDS Plus drill bits. The front handle provides additional stability during use and the soft grip rear handle has knuckle protection. 2 variable speeds allow you to drill into a wide variety of materials. Comes as a Bare Unit, No Battery or Charger. Specification Tool Holder SDS Plus. No Load Speed 0&ndash300/0&ndash1,000/min. Impact Rate 0-5,000/bpm. Impact Energy 0.8 Joules. Sound Pressure Level LpAt 84.28 dB(A). Capacity Wood 20mm, Steel 10mm, Masonry 20mm.

Safe and precise work with greater control thanks to the auxiliary handle.Suitable for drilling and screwing in wood, metal and plastic.Syneon Technology for optimal power and maximum autonomy.Compatible with the Bosch 18V POWER FOR ALL battery.The QuickSnap attachment offers flexibility with shank, eccentric and angle screwdriving accessories, allowing precise work to be done in hard-to-reach places.The magnetic cap automatically holds screws in place, freeing up one hand to hold the screws.workpieces and offer more flexibility and freedom when working.For greater control and less fatigue in the most demanding drilling and screwdriving jobs, the adjustable auxiliary handle improves power transfer.…

Mini Cordless Screwdriver / 3.6 V

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.

The Mexco Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core that melts, lubricates and cools when drilling. Note: For use on high speed corded drills Refer to applications for a comprehensive list of materials suitable for these tile drills. Key Features Hex Fitting guarantees stability in the chuck No Water Required €“ Wax lubricated and cooled Diamond Tipped €“ For a professional finish Size: A10VBDB8 8mm Hex Additional information Dry / Wet Dry Grade XCEL Barrel Type Wax Filled Fitment Hex Fit Recommended Tool Corded Drill (High Speed) Applications Bath…

Comprises sizes suitable for cutting holes for downlight installation in wood or plastic. High carbon steel blades with induction hardened teeth. Display packed.

Expert Quality, screwdrivers with hardened SVCM satin chrome plated blades and sand blasted tips. The handle is manufactured from impact-resistant heavy-duty 'soft grip' polypropylene that's colour coded for easy recognition. Some blades have hexagon bolsters which enable extra power to be obtained by use of a spanner.

The Mexco Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core that melts, lubricates and cools when drilling. Note: For use on high speed corded drills Refer to applications for a comprehensive list of materials suitable for these tile drills. Key Features Hex Fitting guarantees stability in the chuck No Water Required €“ Wax lubricated and cooled Diamond Tipped €“ For a professional finish Size: A10VBDB7 7mm Hex Additional information Dry / Wet Dry Grade XCEL Barrel Type Wax Filled Fitment Hex Fit Recommended Tool Corded Drill (High Speed) Applications Bath…

The Mexco Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core that melts, lubricates and cools when drilling. Note: For use on high speed corded drills Refer to applications for a comprehensive list of materials suitable for these tile drills. Key Features Hex Fitting guarantees stability in the chuck No Water Required €“ Wax lubricated and cooled Diamond Tipped €“ For a professional finish Size: A10VBDB6 5.5mm Hex Additional information Dry / Wet Dry Grade XCEL Barrel Type Wax Filled Fitment Hex Fit Recommended Tool Corded Drill (High Speed) Appl…

The Mexco Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core that melts, lubricates and cools when drilling. Note: For use on high speed corded drills Refer to applications for a comprehensive list of materials suitable for these tile drills. Key Features Hex Fitting guarantees stability in the chuck No Water Required €“ Wax lubricated and cooled Diamond Tipped €“ For a professional finish Size: A10VBDB55 5.5mm Hex Additional information Dry / Wet Dry Grade XCEL Barrel Type Wax Filled Fitment Hex Fit Recommended Tool Corded Drill (High Speed) Appl…

Festool Universal Wood Cutting Circular Saw Blade. Various configurations available. Specifications • Diameter: 210mm • Teeth: 36 • Bore: 30mm

Diameter 45mm TDXCEL Range Professional Ultra Hard Material Drill Bits This range of drill bits offer unrivalled performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required. The M14 connection allows use on an angle grinder and with the seperately purchased adaptor (Part Number: TDXM14HEXSET) these drills can be used in a Mains powered drill with a three jaw chuck. (For use on angle grinders & mains powered drills) Applications: Porcelain, Granite & Ceramic Tile. KINDLY REMINDER: Delivery to the UK Highlands, Channel Islands, Northern Ireland, Isle Of Wight, Isle Of Man and the following postal code areas: BT, FK, KA (1-30), PA(1-49),…

Diameter 38mm TDXCEL Range Professional Ultra Hard Material Drill Bits This range of drill bits offer unrivalled performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required. The M14 connection allows use on an angle grinder and with the seperately purchased adaptor (Part Number: TDXM14HEXSET) these drills can be used in a Mains powered drill with a three jaw chuck. (For use on angle grinders & mains powered drills) Applications: Porcelain, Granite & Ceramic Tile. KINDLY REMINDER: Delivery to the UK Highlands, Channel Islands, Northern Ireland, Isle Of Wight, Isle Of Man and the following postal code areas: BT, FK, KA (1-30), PA(1-49),…

Diameter 32mm TDXCEL Range Professional Ultra Hard Material Drill Bits This range of drill bits offer unrivalled performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required. The M14 connection allows use on an angle grinder and with the seperately purchased adaptor (Part Number: TDXM14HEXSET) these drills can be used in a Mains powered drill with a three jaw chuck. (For use on angle grinders & mains powered drills) Applications: Porcelain, Granite & Ceramic Tile. KINDLY REMINDER: Delivery to the UK Highlands, Channel Islands, Northern Ireland, Isle Of Wight, Isle Of Man and the following postal code areas: BT, FK, KA (1-30), PA(1-49),…

All tools are manufactured from solid brass and polished hardwood delivering a professional feel, look and performance. The sliding bevel, dovetail square and try square feature a precision machined blackened steel blade. The set is completed with a portable storage pouch. Display packed.

Diameter 25mm TDXCEL Range Professional Ultra Hard Material Drill Bits This range of drill bits offer unrivalled performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required. The M14 connection allows use on an angle grinder and with the seperately purchased adaptor (Part Number: TDXM14HEXSET) these drills can be used in a Mains powered drill with a three jaw chuck. (For use on angle grinders & mains powered drills) Applications: Porcelain, Granite & Ceramic Tile. KINDLY REMINDER: Delivery to the UK Highlands, Channel Islands, Northern Ireland, Isle Of Wight, Isle Of Man and the following postal code areas: BT, FK, KA (1-30), PA(1-49),…

Diameter 18mm TDXCEL Range Professional Ultra Hard Material Drill Bits This range of drill bits offer unrivalled performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required. The M14 connection allows use on an angle grinder and with the seperately purchased adaptor (Part Number: TDXM14HEXSET) these drills can be used in a Mains powered drill with a three jaw chuck. (For use on angle grinders & mains powered drills) Applications: Porcelain, Granite & Ceramic Tile. KINDLY REMINDER: Delivery to the UK Highlands, Channel Islands, Northern Ireland, Isle Of Wight, Isle Of Man and the following postal code areas: BT, FK, KA (1-30), PA(1-49),…