Circuit Breakers ABB

The busbars reduce the wiring effort for ABB i-bus® modular installation devices. Different load circuits can be supplied from a common source using the busbar.The busbars are suitable for 6 sqmm term more→inals in the ABB i-bus® range, such as those installed in the 10 A and 16 A SA/S ABB i-bus® Switch Actuators, Switch/Dim Actuators SD/S x.16.1 or Light Controller LR/S 4.16.1.

Abb System pro M compact SZ comb rail, diameter 16mm², length 204mm, rated continuous current Iu 80A, electrical connection design pin, 1 phase, suitable for number of devices 12, 12 poles, divider si more→ze 17.5mm, insulated, max. Rated operating voltage Ue 400V, rated shock voltage 4kV.

Abb System pro M compact SZ comb rail, diameter 10mm², length 230mm, rated continuous current Iu 63A, electrical connection design pin, 1 phase, suitable for number of devices 56, 12 poles, divider si more→ze 17.5mm, insulated, max. Rated operating voltage Ue 400V, rated shock voltage 4kV.

Universaladapter single pole max. 32A L1-L2-L3 top feed ABB SMISSLINE Product.

Universaladapter single pole max. 32A N top feed ABB SMISSLINE Product.

Abb System pro M compact BS9 comb rail, diameter 10mm², length 187.6mm, rated continuous current Iu 63A, for the purpose of series(s) S900 / DS900, electrical connection design pin, 1 phase, suitable more→for number of devices 12, 12 poles, division size 17.5mm, insulated, max. Rated operating voltage Ue 400V.

Abb System pro M compact BS9 comb rail, diameter 10mm², length 187.6mm, rated continuous current Iu 63A, for the purpose of series(s) S900 / DS900, electrical connection design pin, 1 phase, suitable more→for number of devices 12, 12 poles, division size 17.5mm, insulated, max. Rated operating voltage Ue 400V.

This comb rail PS 2/12 from ABB's System Pro M series is for the purpose of circuit breakers. The collector rail can accommodate 12 devices. Furthermore, the comb rail has a cross-sectional area of 10 more→mm² and a rated continuous current of 63A.

3-phase power distribution busbar designed for connecting two MS116/MS132 devices with integrated auxiliary contact. Rated for 65A at 690V, this component provides a professional solution for industri more→al motor protection applications. Compatible with ABB MS116 and MS132 series motor protection circuit breakers.

This comb rail PS 3/12 from ABB's System Pro M series is for the purpose of circuit breakers. The collector rail can accommodate 4 devices. Furthermore, the comb rail has a cross-sectional area of 10m more→m² and a rated continuous current of 63A.

The double cage clamps of the SN201 L installation circuit breaker provide easy mounting of the circuit breaker. The SN201 L circuit breaker achieves maximum safety through the wide opening of the eid more→er. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you always know the status of the contacts. ABB SN L circuit breakers are available in different variants.

Compact single-pole plus neutral (1P+N) miniature circuit breaker designed for electrical protection in residential and commercial applications. Features B-curve tripping characteristics with 16 amper more→e rated current capacity, suitable for standard circuit protection against overload and short circuits.

This comb rail PS 4/12 from ABB's System Pro M series is for the purpose of circuit breakers. The collector rail can accommodate 3 devices. Furthermore, the comb rail has a cross-sectional area of 10m more→m² and a rated continuous current of 63A. With end caps.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electrome more→chanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications.

The double cage clamps of the SN201 L installation circuit breaker provide easy mounting of the circuit breaker. The SN201 L circuit breaker achieves maximum safety through the wide opening of the eid more→er. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you always know the status of the contacts. ABB SN L circuit breakers are available in different variants.

The double cage clamps of the SN201 L installation circuit breaker provide easy mounting of the circuit breaker. The SN201 L circuit breaker achieves maximum safety through the wide opening of the eid more→er. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you always know the status of the contacts. ABB SN L circuit breakers are available in different variants.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electrome more→chanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electrome more→chanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications.

This comb rail PS 4/12/16 from ABB's System Pro M series is for the purpose of circuit breakers. The collector rail can accommodate 3 devices. Furthermore, the comb rail has a cross-sectional area of more→16mm² and a rated continuous current of 80A. With end caps.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electrome more→chanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications.

The double cage clamps of the SN201 L installation circuit breaker provide easy mounting of the circuit breaker. The SN201 L circuit breaker achieves maximum safety through the wide opening of the eid more→er. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you always know the status of the contacts. ABB SN L circuit breakers are available in different variants.

Professional-grade busbar and feed-in terminal kit for S200C series. Features 4-pole configuration with 3-phase plus neutral, 10mm² diameter insulated terminals. Accommodates 12 modules with 18mm spac more→ing. Rated for 16A continuous current and 230V nominal operating voltage. Includes 100mm length rail system with pin electrical connections.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electrome more→chanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications.

The double cage terminals of the SN201 installation circuit breaker allow for easy mounting of the circuit breaker. The SN201 circuit breaker achieves maximum safety through the wide opening of the ei more→der. Here, an insulated screwdriver can be used to tighten the screws of both wire terminals. Thanks to the contact position indicators (CPI) on the circuit breaker rocker switch, you will always know the status of the contacts. ABB SN circuit breakers are available in different variants.