100 A

Horizontal combination bus bar designed for Acti9 iC60/iK60 installations, featuring 6x18mm modules with 100A nominal operating current at 40°C. Supports single-phase distribution with 415V AC operati more→ng voltage and 500V AC isolation voltage. Features 16mm² pin cross-section, meets IEC 60947-7-1 and IEC 61439-2 standards, with 960°C/30s flame resistance.

Industrial-grade miniature circuit breaker designed for advanced commercial and industrial applications. Features C-characteristic tripping curve, 100A rated current, single pole configuration, and 20 more→kA breaking capacity. Part of Eaton's xEffect series, this MCB provides reliable circuit protection for demanding installations.

The Acti 9 C120N is a low-voltage miniature circuit breaker (MCB) with 2 protected poles, rated at 100A with C-characteristic tripping curve. Features 10kA breaking capacity at 380-415VAC (IEC 60947-2 more→) and 10000A at 230-400VAC (IEC 60898-1). Designed for both residential and industrial applications, it protects circuits against short circuits and overload currents with 20,000 mechanical and 5,000 electrical operation cycles.

Industrial-grade 3-pole miniature circuit breaker with 100A nominal current and C-characteristic tripping curve. Features 10kA breaking capacity at 415V AC according to IEC 60947-2 standards. Offers p more→rotection against short circuits and overload currents with a mechanical lifetime of 20,000 cycles and electrical durability of 5,000 cycles. Includes visual OFF position indicator with green strip for quick status identification.

The Eaton Industries Molded Case Switch is a 3-pole switch-disconnector with a switching capacity of SCCR 480Y/277 V at 60 Hz and an interrupting capacity (Icu) of 35 kA. The rated and uninterrupted c more→urrent (In and Iu respectively) is 100 A. Approved by UL/CSA and IEC, this MCCB is designed for fixed installations and features a box terminal. Its primary protective function is as a disconnector or main switch. It follows standard industry specifications and complies with necessary safety regulations.

The Eaton Industries MCCB circuit-breaker NZM1 is a 3-pole, fixed installation type breaker with a switching capacity of 400/415V at 50 Hz and grants an interrupting capacity (Icu) of 36 kA. The rated more→current, also known as the uninterrupted current (In=Iu), is rated at 100 Amps. This breaker utilizes a box terminal and adheres to the IEC standards. Designed primarily for system and cable protection, it ensures the safety and efficiency of your power management.

The Eaton Industries MCCB power circuit breaker is a NZM1, 3-pole model with a switching capacity of SCCR 480Y/277 V 60 Hz. Its interrupting capacity (Icu) is 25 kA and it has a rated current, which i more→s also its rated uninterrupted current, of 100 A. The installation type of this circuit breaker is fixed and it comes with a box terminal. This product meets standard approvals from UL/CSA and the IEC. It holds a protective function for both system and cable protection.

The Eaton Industries MCCB power circuit-breaker NZM2 is designed with 3 poles and features a switching capacity SCCR of 25 kA at 480Y/277V 60Hz, 18 kA at 600Y/347V 60Hz, and 25 kA at 480V 60Hz. It has more→a rated current that equals rated uninterrupted current of 100 A. This circuit-breaker can be installed as a fixed unit and features a screw connection. It meets UL/CSA and IEC standards and approvals. Furthermore, this device is primarily employed for system and cable protection.

The Eaton Industries MCCB circuit-breaker NZM1 is designed with 3 poles and offers a switching capacity SCCR of 480Y/277 V 60 Hz with a rated interruption capacity (Icu) of 25 kA. Moreover, it has a r more→ated current that equals its rated uninterrupted current (In = Iu) that stands at 100 A. It is a fixed installation type and comes with a box terminal. The circuit breaker conforms to UL/CSA and IEC standards. Primarily it offers system and cable protection.

The Eaton Industries MCCB circuit-breaker NZM2 features a 3-pole design with various switching capacities: SCCR 480Y/277V 60Hz at 25 kA, SCCR 600Y/347V 60Hz at 18 kA, and SCCR 480V 60Hz at 25 kA. It h more→as a rated current equal to its rated uninterrupted current of 100 A. This model is designed for a fixed installation type and includes a box terminal. Standard and approved by UL/CSA and IEC, it offers protective functions specifically for system and cable protection.

The Eaton Industries MCCB is a power circuit-breaker featuring four poles with a switching capacity of 400/415 V 50 Hz and an interrupting capacity (Icu) of 36 kA. The rated current, which is the same more→as the rated uninterrupted current (In = Iu), is 100 A. Designed for fixed installation, it comes with box terminals and adheres to IEC standards and approvals. As a protective device, it serves the dual function of system protection and cable protection.

This is an Eaton Industries MCCB circuit breaker. Its rated continuous current (Iu) is 100A with a nominal voltage of 690V. The breaker's nominal breaking capacity (Icu) at 400V is 50kA. Its overload more→protection setting range is 80 - 100A, while the instantaneous short-circuit setting range is 600 - 1000A. This device comes in a fixed installation type and has a box terminal design. Its main purpose is system and cable protection and it's standard/approval is according to IEC.

The Eaton Industries MCCB (Molded Case Circuit Breaker) is a 3-pole NZM2 type, suitable for system and cable protection. It has a switching capacity of 400/415 V 50 Hz, and an interrupting capacity (I more→cu) of 150 kA. This circuit breaker's rated current, which is the same as its rated uninterrupted current (In = Iu), is 100 A. It is designed for fixed installations and comes with a screw connection. The MCCB complies with IEC standards.

Eaton circuit-breaker UL/IEC.

The Eaton Industries MCCB Circuit-breaker NZM1 is a 3-pole switch with a switching capacity of SCCR 480Y/277 V 60 Hz and an interrupting capacity (Icu) of 35 kA. It features a rated current, equal to more→the rated uninterrupted current (In = Iu), of 100 A. Designed for fixed installations, it includes a box terminal. This circuit breaker is approved and compliant with UL/CSA and IEC standards, serving the protective function of system and cable protection.

The Eaton Industries MCCB is a 3-pole circuit-breaker from the NZM2 series. It provides a switching capacity of 400/415 V at a frequency of 50 Hz with an interrupting rating (Icu) of 150 kA. The rated more→current equals the rated uninterrupted current (In = Iu) of 100 A. This device is designed for fixed installation and comes with a box terminal. Complying with the IEC standards, its primary protective function is to provide system and cable protection.

The Eaton Industries MCCB Circuit-breaker NZM2 is a 4-pole power switch specifically designed for system and cable protection. It has a switching capacity of 400/415 V 50 Hz and an interrupting capaci more→ty (Icu) of 150 kA. The circuit breaker is fixed type, making the installation process easy. It also comes with a screw connection for secured fastening. This breaker's rated current, which is also its rated uninterrupted current, is 100 A. This product is approved and standardized by IEC.

The Eaton Industries MCCB Circuit-breaker NZM2 is a three-pole device with a switching capacity SCCR at 480Y/277V, 60Hz of 150kA, and 600Y/347V, 60Hz of 65kA and 480V, 60Hz of 150kA. With a rated and more→uninterrupted current, In = Iu of 100A, this breaker is designed for fixed installation. Connections are made via screw connection and it meets the standards of UL/CSA and IEC. It is primarily used for system and cable protection.

The Eaton Industries MCCB power switch, also known as a Circuit-breaker NZM2, is a 3-pole device with a switching capacity of 1000 V 50/60 Hz (Ics) and a rated current equivalent to a rated uninterrup more→ted current (In = Iu) of 100 A. This switch is designed as a fixed, screw connection installation type. It meets IEC standards and approvals, offering both system and cable protection. Its protective function ensures the system and cable are safe from overload and short circuit situations.

The Eaton Industries MCCB Circuit-breaker NZM2 is a 3-pole switch with multiple switching capacities: SCCR 480Y/277V 60Hz (Icu): 150 kA, SCCR 600Y/347V 60Hz (Icu): 65 kA, and SCCR 480V 60Hz (Icu): 150 more→kA. It has a rated current that equals its rated uninterrupted current (In = Iu) of 100 A. This device is designed for fixed installation with a box terminal. In terms of standards and approvals, it is qualified by UL/CSA and IEC. Additionally, it serves a protective function for your system and cable.