Computer Cooling ARCTIC

CONTACT FRAME FOR INTEL LGA1851 AND LGA1700: Improved contact pressure distribution through Intel mounting frame for efficient heat transfer thanks to even CPU contact surface HIGH-PERFORMANCE FOR HIGH-END CPUs: With its 4 offset heat pipes, the single-tower cooler enables fast heat transfer to the heat sink. There, the heat is efficiently dissipated by pressure-optimised 120 mm fans INNOVATIVE FAN MOUNTING: Innovative Click-installation system makes it easier to install the cooler or replace the fans. The Freezer 36 is compatible with most 120 mm fans SIDE-FLOW HEAT SINK: By opening the fins on the side, the pull fan draws additional cool air out of the case through the heat sink, optimises …

Pressure-optimised 80 mm Fan Optimised For Static Pressure During the development of the new P8, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 is particularly suitable for use on heatsinks and radiators. High Quality BearingThanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Maximum Quietness, Minimum VibrationEven at low speeds the operating …

Premium Performance Thermal Paste with Spatula   Highest Thermal Conductivity The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity guaranteeing that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance the MX-4 is not only an excellent choice for overclockers and enthusiasts but also for other sapplications that require thermal transmission.  MX-4 proves without a doubt that great performance does not necessarily require a high price.…

140mm Fan / 4-pin / Max. Noise Emission 26 dB / Volume Flow 117.06 m³/h / Dimensions (WxHxD) 140 x 140 x 27 mm

CPU Cooler / Arctic Liquid Freezer / Radiator Size 420 mm / Fan Size 140 / Fan (pre-installed) 3 / Fan (maximum) 6 / Contact Surface Copper / Power Connection 4-Pin-PWM / Volume Flow 118.761 m³/h / Automatic Fan Speed Control PWM / Cable Length 450 mm

  4-Pin PWM fan with standard case Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life       Perfect Case Fan Regulation with PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.       PWM Sharing Technology (PST) Lowers Noise If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans …

ARCTIC MX Cleaner - Wipes for removing Thermal Compounds (40 Pieces)

CONTACT FRAME FOR INTEL LGA1851 AND LGA1700: Improved contact pressure distribution through Intel mounting frame for efficient heat transfer thanks to even CPU contact surface HIGH-PERFORMANCE FOR HIGH-END CPUs: With its 4 offset heat pipes, the single-tower cooler enables fast heat transfer to the heat sink. There, the heat is efficiently dissipated by pressure-optimised 120 mm fans INNOVATIVE FAN MOUNTING: Innovative Click-installation system makes it easier to install the cooler or replace the fans. The Freezer 36 is compatible with most 120 mm fans SIDE-FLOW HEAT SINK: By opening the fins on the side, the pull fan draws additional cool air out of the case through the heat sink, optimises …

Case Fan / 4-pin / Volume Flow 161.4 m³/h / Dimensions (WxHxD) 140 x 140 x 27 mm

Case Fan / 3-pin / Volume Flow 40.95 m³/h / Dimensions (WxHxD) 120 x 120 x 25 mm

Case Fan / 4-pin / Volume Flow 90.1 m³/h / Dimensions (WxHxD) 120 x 120 x 25 mm

The impeller of the S8038-10K is held in place by two ball bearings, making it not only particularly durable but also less sensitive to external influences such as heat and dust The S8038-10K has a wide speed range that can be regulated via PWM and voltage. With up to 10000 rpm, it provides an ideal balance between cooling performance and noise With a static pressure of 51 mmH₂O and a maximum airflow of 173.30 m³/h, the S8038-10K is a true all-rounder and is suitable as both a radiator fan and a case fan The S8038-10K fits into 2U server cases and serves as an upgrade or replacement for a CPU fan, radiator fan or for system ventilation The fan has a standard 4-pin connector and can also be …

Case Fan / 3-pin / Max. Noise Emission 26 dB / Volume Flow 126 m³/h / Dimensions (WxHxD) 140 x 140 x 27 mm

PREVENTIVE: Ventilation grilles provide protection against rapidly rotating fan blades and prevent damage to the cable DOES NOT AFFECT THE AIR: Ventilation grids hardly affect airflow, this means that there is less than 1% impact on performance AVAILABLE IN DIFFERENT SIZES: Our ventilation grids are available in 4 sizes: to fit your 80mm, 92mm, 120mm or 140mm fan perfectly GERMAN PRODUCT: Our German engineers constantly improve the performance of our fans. With this range of accessories, we continue our search for excellence TECHNICAL DETAILS: Grill size for fan 120 mm: 105 mm * 105 mm (hook-on hook). This product is made of nickel-plated steel

PREVENTIVE: Ventilation grilles provide protection against rapidly rotating fan blades and prevent damage to the cable DOES NOT AFFECT THE AIR: Ventilation grids hardly affect airflow, this means that there is less than 1% impact on performance AVAILABLE IN DIFFERENT SIZES: Our ventilation grids are available in 4 sizes: to fit your 80mm, 92mm, 120mm or 140mm fan perfectly GERMAN PRODUCT: Our German engineers constantly improve the performance of our fans. With this range of accessories, we continue our search for excellence TECHNICAL DETAILS: Grill size for fan 80 mm: 71.5 mm * 71.5 mm (hook grip). This product is made of nickel-plated steel

140mm Fan / 3-pin / Max. Noise Emission 30 dB / Volume Flow 131.4 m³/h / Dimensions (WxHxD) 140 x 140 x 25 mm

120mm Fan / 4-pin / Max. Noise Emission 25.3 dB / Volume Flow 137.69 m³/h / Dimensions (WxHxD) 120 x 120 x 25 mm