Drills & Screwdrivers Makita

Impact Driver / 1/4 inch internal hexagon / 2-speed / 196 Nm Max. Torque / Blow Count (max.) 3,000 counts/min

Makita 18v Cordless Combi Drill Comes complete with a 70 piece Makita accessory set, contained within the pilot case drawer Two speed gearbox with metal gears for durability Keyless chuck, this makes it very easy to change the bits Makita Chest for Drill & 70 site ready Makita Accessories

The Makita HP1641 Percussion Drill has a dual purpose for Rotation only and Rotation with Hammering (with keyless drill chuck). The new reversing system allows extended service life of carbon brush no power reduction even in reverse rotation. Variable speed control via a larger trigger gives the user more control. An in-line positive grip design maximises power thrust. Specification Input Power 680W No Load Speed 0-2,800/min. Impact Rate 0-44,800/bpm Capacity Steel 13mm, Masonry 16mm, Wood 30mm Weight 2.0kg All vibration figures quoted are Tri-axial to EN 60745 2006. Vibration Drilling 2 m/sec Vibration Hammer Drilling 19 m/sec Vibration K Factor 2 m/sec

make transportation of tools easier. Makita have developed these moulded inner trays to allow you to securely store your tools in the Makpac cases.

Angle Drill / 900 rpm Idle Speed (max.) / Mains Operation / Keyed / 3.7 kg / 710 Watt

Cordless Combi Hammer / 1,100 rpm Idle Speed (max.) / Blow Count (max.) 4,000 counts/min / Battery Operation / Technical Specifications Electronic Speed Control / SDS-Plus / 3.5 kg / Impact Force 1.9 Joule / 6 Ah / 2-speed

Powered exclusively by the 18V G-Series battery and DC18WA charger Compact and lightweight Hammer Driver Drill 16 torque settings plus drill mode Conveniently located reverse switch Mechanical 2 speed gears. all metal gear construction Single sleeve keyless chuck Variable speed controlled by trigger Maximum fastening torque S / H: 24 / 42 Nm 13mm maximum capacity in masonry, 13mm maximum capacity in steel, 36mm maximum capacity in wood Not compatible with LXT batteries

This cordless drill combines a hammer action and drill driver function allowing us to drill through materials such as concrete, brick, wood, metal or plastic. This combi drill also features a High efficiency brushless motor, 2 mechanical gears, LED Job light, battery protection circuit and an electric brake. Max Torque: 35Nm Chuck Capacity: 0.8mm-10mm Drilling Capacity (Steel): 10mm Drilling Capacity (Wood): 28mm Drilling Capacity (Masonry): 8mm No Load Speed: 0-1,500rpm Blows per minute: 0-22,500bpm Voltage: 10.8V

Genuine Makita Part Easy to Install Constructed from Stainless Steel

Makita DTW1002RGJ Impact Wrench 18V Brushless LXT Li-ion 1/2 Inch Square Drive with 2 x 6.0Ah Batteries, Charger and Makpac Type 3 Connector Case The DTW1002 is a Cordless Impact Wrench with the power of AC models. With an extra high maximum tightening torque of 1000Nm, this machine certainly has plenty of grunt due to the high powered brushless motor and newly designed impact mechanism. It is equipped with twin LED joblights with pre-glow and afterglow function for working in dark areas and 3 Stage Impact Power Selection. This reduces fault tightening, you can suit the material of workpiece or screw at a push of a button. Features: Electric brake Variable speed control trigger Reverse switch …

Cordless Hammer Drill / 1,100 rpm Idle Speed (max.) / Blow Count (max.) 4,000 counts/min / Battery Operation / Technical Specifications Anti-Vibration / Security Feature Electric Brake / SDS-Plus / 3.5 kg / Impact Force 2 Joule / 1-speed

Cordless Drill Impact Driver / 1,700 rpm Idle Speed (max.) / Max Torque (Hard) 40 Nm / Technical Specifications Brushless Motor / Security Feature Electric Brake / 18 V

Proven reliable Makita technology Lightweight construction at just 3.26 Kgs High performace for the home or tradesman

This cordless impact driver is small, compact yet extremely powerful The DTD152 is a small yet powerful impact driver, capable of producing up to 2900rpm and 3500ipm. It also features variable speed control so you can tailor the speed to the application. Other features of this model include a battery protection circuit for long life, LED job light for illumination of dark work areas and forward/reverse rotation. Complete with 1 x 5.0Ah battery, charger and MakPac case. Features: Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light One touch bit installation Ergonomic soft grip handle Compact overall length of 137mm Lightweight design …

Cordless Combi Hammer / 310 rpm Idle Speed (max.) / Blow Count (max.) 2,250 counts/min / Battery Operation / 12.9 kg / Impact Force 21.4 Joule

Compatible with the TSTAK II carry case securely store the DeWalt drills and accessories Constructed with strong and rigid

Makita-built motor delivers up to 245 in.Lbs. Of max torque Variable speed (0-1, 100 RPM) for a wide range of drilling and driving applications 3/8" Keyed metal chuck for improved bit gripping power Compact 2-1/2" angle head height for use in close quarters Compact and ergonomic design at only 12-3/8" long