Cables (video, audio, USB) Oukitel Y1000  all cables (video, audio, usb) →

Wall Mount TFT Monitor Arm Black The NLTFTARM-170 LCD panel wall mounting system firmly fixes onto a wall and has left right up and down movement. Available in black or cream Specification Complies with VESA mounting standard(75*75mm or 100*100mm) Holds 14” - 19” LCD monitors up to 10kgs in weight. Supplied with allen key and VESA mounting screws Contents 1 x TFT Arm 1 x FItting Kit 1 x Instructions

Desktop Clamp TFT Monitor Arm Black The NLTFTARM-183 Desktop LCD monitor arm has three adjustable height positions and a universal joint which allows the monitor to be pointed in any way you desire. Available in black or creamSpecification Complies with VESA mounting standard(75*75mm or 100*100mm) Holds 14” - 19” LCD monitors up to 10kgs in weight Supplied with allen key and VESA mounting screws Contents 1 x TFT Arm 1 x Fitting Kit 1 x Instructions

USB to Serial Adapter 9 Way Male RS232 Prolific PL2303RA Easily connect your Serial Device to a USB port on a PC or Mac with the USB Serial Converter. It operates as a bridge between one USB port and a standard RS-232 Serial Port. Specification Prolific PL2303RA chipset USB to Serial 9 pin D sub male Compliant with the USB 1.1 Specification Supports RS-232 Serial Interface Supports 500Kbps data transfer rate Detects USB Suspend Supports Plug and Play Specification USB Host drivers available Draws power directly from USB no additional power adapter required Length: 20cm Upstream port: USB type A plug (Male) Downstream Port: D-Sub 9 Pin Connector (Male) Host Interface: USB BUS OS Supported:

USB Port Blocker 3 Pack with Key The USB Port Blocker allows you to deny access to any USB socket. This is useful to stop flash drives and external hard drives being connected to a computer or server to copy sensitive data stop the delivery of viruses keyloggers and other malicious programs. It will also stop people connecting and charging mobile devices. Insert lock into a USB port with the key Squeeze the side buttons and pull out To remove the lock insert the key into the USB lock and pull out without squeezing the side buttons. Once the blocker is in place it will be very difficult to remove without damaging the USB port unless you have the key. Features: Blocks Type A female USB Ports

USB Port Blocker 10 Pack Pack of 10 USB Port blockers for use with the NLUSB-PB01 key these port blocks can be inserted manually but can only be removed safely with the key. Ideal for stopping users from inserting memory sticks and external hard drivers etc blocks unwanted USB devices from being connected by blocking the USB port. Contents:- USB Port Blocks x10

USB 2.0 A-Male B-Male -- 2m Newlink 2m USB A to B Cable.

USB 2.0 2 Port Mini Switch USB 2.0 This USB 2.0 switch is ideal for sharing devices such as printers scanners flash drives external hard drive enclosures and other low-powered devices. Specification Supports up to 480Mbps Manual switch 2 x USB type B ports 1 x USB type A port Bus Powered No drivers required

Newlink USB 2.0 Bus Power 2-Port Hub The NLUSB2-202A is a multi-port USB2 hub that maximises the capacity of 1 USB port by creating an extra 2 USB ports. The NLUSB2-202A is a fantastic plug and play solution for those who find USB ports scarce within a laptop or desktop. Specification Full compliance with USB 1.1 and USB 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates. Connects up to 127 USB Devices. Over current detection and protection. Bus powered from USB port no power adaptor needed. Suitable for mobile PC Environment. No Driver needed for Windows ME 2000 and XP. Or Mac OS 10.1 or later. Driver Supplied for

NEWlink 4 Port USB Hub Bus Powered 19cm Cable The four port USB 2.0 hub lets you connect up to four devices. Comes with an attached type A male 19cm cable. Specification USB 2.0 Compliant Supports High Speed (480MBps) Plug n Play Supports Windows 10 8/8.1 and Win 7 Supports Mac OS 9.x and above 4x USB2.0 ports Portable design Bus powered Built-in USB cable (19cm) Contents 4 Port USB 2.0 Hub

NEWlink 4 Port USB Hub Bus Powered The four port USB 2.0 hub lets you connect up to four devices. Comes with an attached type A male 11cm cable. Specification USB 2.0 Compliant Supports High Speed (480MBps) Plug n Play Supports Windows 10 8/8.1 and Win 7 Supports Mac OS 9.x and above 4x USB2.0 ports Portable design Bus powered Built-in USB cable (11cm) Contents 4 Port USB 2.0 Hub

USB 2.0 4 Port Powered Hub The USB2-222 is a 4 Port USB 2.0 Compliant Hub allows up to 4 USB 1.1 or 2.0 Devices to be connected to you computer. It supports the High Speed transmission rate of up to 480 Mbps and is fully backward compatible with USB revision 1.1 devices. The USB2-222 makes an excellent solution for those wanting to maximise the USB intake of their PC.Specification 4 USB 2.0 Ports up to 100mA per port or up to 500mA (with power adapter) Supports over current protection on each port. Provides 4 Type A Female and 1 Type B Female Connectors. Supports High-Speed (480 Mbps) Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) Compliant with USB specification Revision 2.0. Chains up to

NEWlink USB 2.0 7 Port Hub with power Adapter The seven port USB 2.0 hub lets you connect up to seven devices. Comes with a 5v power supply for use with high powered devices.Specification USB 2.0 Compliant 7 USB 2.0 Ports Supports High Speed (480MBps) USB and ACPI Compliant Supports Over Current Protection Plug n Play Supports Windows 2000 XP Vista Win7 MAC OS 8.6/9.x/10.x and Linux 2.4+ Contents 7 Port USB 2.0 Hub USB A to mini B cable 5v 2a power adaptor

USB 2.0 Active Repeater Cable 5m USB Extension The USB2.0 Active Extension Cable can be used to extend the cable length of any USB2.0 device. The USB data extension acts as a transparent hub and buffers all up-stream and down-stream traffic. The Active Extension Cable buffers data going in and out this is to ensure that the signal meets the electrical and timing specifications. Using passive extension cables can result in timing errors and data loss. Specification Compliant with USB 2.0 Data Transfer Rate: 1.5 / 12 / 480Mbps Length: 5m Active Extension Plug and Play Driverless Installation Supports Windows 11 10 7 and Mac OS X

USB 2.0 Active Repeater Cable 5m USB Extension The USB2.0 Active Extension Cable can be used to extend the cable length of any USB2.0 device. The USB data extension acts as a transparent hub and buffers all up-stream and down-stream traffic. The Active Extension Cable buffers data going in and out this is to ensure that the signal meets the electrical and timing specifications. Using passive extension cables can result in timing errors and data loss. Specification Compliant with USB 2.0 Data Transfer Rate: 1.5 / 12 / 480Mbps Length: 5m Active Extension Plug and Play Driverless Installation Supports Windows 11 10 7 and Mac OS X

NEWlink 4 Port USB 3.0 Ultra Mini Hub - Bus Powered The NEWlink USB3.0 4 Port Hub is ideal for adding additional USB3.0 ports to your desktop or laptop. With its aluminium casing it looks modern and professional at home or in the office. Specification 4 Port USB3.0 hub Data transfer rates up to 5 Gbps 10x Faster than USB2.0 Low power consumption Ultra slim design Plug and Play hot-swappable No driver required Supports Windows 10 and below Supports MAC OSX 10.x and above Supports Linux * Transfer speeds will vary depending on devices connected

4 Port USB3.0 Hub with Quick Charge Port Powered The NEWlink USB3.0 4 Port Hub is supplied with a 12v 2a external power supply and is ideal for adding additional USB3.0 ports to your desktop or laptop. It supports a data rate of up to 5Gbps as well as a quick charge port allowing you to rapidly charge devices that support quick charging. The quick charge port is dedicated to charging only this port cannot be used for data transfer. While this is a powered USB hub it will work without a power supply at a reduced rate and the quick charge port won't work. Specification 4 Port USB3.0 hub 1 Dedicated Quick Charging port for compatible devices A dedicated on/off switch on each port with LED

USB 3.0 4 Port Hub The USB 3.0 4 port hub supports USB Super Speed 5Gbps and backwards compatible with previous USB specifications. The 4 Port hub can be used with or without the supplied power supply. Specification USB 3.0 Compliant 4 Port Hub Supports Super Speed 5Gbps Backwards compatible with USB 2.0 1.1 and 1.0 USB and ACPI complaint Plug n Play Supports powered or bus powered modes Compatible with Windows XP Vista Win 7 Win 8 and MAC 9.x and above Contents: 4 Port Hub 5v 3.5A PSU USB 3.0 A to B cable

USB 3.0 Bus Powered 4 Port Hub The USB 3.0 4 port hub supports USB Super Speed 5Gbps and backwards compatible with previous USB specifications. The 4 Port hub is bus powered via USB. Specification USB 3.0 Compliant 4 Port Hub Supports Super Speed 5Gbps Backwards compatible with USB 2.0 1.1 and 1.0 USB and ACPI complaint Plug n Play Bus powered Compatible with Windows XP Vista Win 7 Win 8 and MAC 9.x and above Contents: 4 Port Hub

USB 3.0 2 Port PCI-e Card USB 3.0 is the new super speed standard for hardware and cables supporting speed up to 5Gbps. Our PCIe USB 3.0 cards are built to specification and uses either of the PCI Express slots on your motherboard. Due to hardware restrictions actual speeds may vary. Specification Compliant with USB 3.0 specification REV 1.0. Compliant with USB 3.0 (5Gbps) 2.0 (480Mbps) and USB 1.1 (12Mbps) specification. Supports USB legacy function. Compliant with PCI Express specification 2.0. Supports 4 Pin power socket for floppy drive power connector. Each USB 3.0 connector supports up to 900Ma. Compatible with Windows XP Vista and Windows 7/8/8.1/10

2-Port USB 3.0 Express Card 34mm USB 3.0 is the new super speed standard for hardware and cables supporting speeds up to 5Gbps. Our USB 3.0 Express cards are built to specification. Due to hardware restrictions actual speeds may vary. Specification Compliant with USB 3.0 specification REV 1.0. Compliant with Intel xHCI Rev 0.96. Compliant with USB 3.0 (5Gbps) 2.0 (480Mbps) and USB 1.1 (12Mbps) specification. Each USB 3.0 connector supports up to 900Ma. Built in DC jack for extra power. Supports Express card 34mm slot. Support Hot Swapping and Plug n Play. Compatible with Windows XP Vista and Windows 7.

NEWlink 4 Port USB 3.1 Hub Gen 2 10Gbps 2x USB A 2x USB C The NLUSB3C-422 is a USB Type C to USB 3.0 four port hub designed for connecting four USB devices to a host computer with a USB Type C socket. The hub features a USbtwo Type A sockets and two Type C sockets. Specification USB 3.1 Gen 2 (10Gbps transfer speed)* 2 x USB Type C ports 2 x USB Type A ports Slim design Backwards compatible with previous USB versions Plug n Play LED power indicator * Transfer speeds will vary depending on devices connected

USB C 6-in-1 Adapter HDMI Card Reader and USB Since the introduction of USB C products have started using just one or two USB C ports and adapters are needed. Our USB C 6-in-1 adapter allows you to connect multiple ports to a USB C port on your computer. This is an ideal portable solution for adding ports that your computer does not have. This adapter allows you to connect one HDMI port with a resolution of 4k@60Hz two USB 3.0 ports (5gbps one port charges at 7.5w) SD/Micro SD card reader and a USB C port for power delivery 3.0 (100w this port cannot be used for data). The power delivery port allows you to connect your power adapter to the port and passes the charge through to your laptop or

USB C 7-in-1 Adapter HDMI Ethernet Card Reader and USB Since the introduction of USB C products have started using just one or two USB C ports and adapters are needed. Our USB C 7-in-1 adapter allows you to connect multiple ports to a USB C port on your computer. This is an ideal portable solution for adding ports that your computer does not have. This adapter allows you to connect one HDMI port with a resolution of 4k@60Hz two USB 3.0 ports (5gbps one port charges at 7.5w) an SD/Micro SD card reader a USB C port for power delivery 3.0 (100w this port cannot be used for data) and a gigabit ethernet port. The power delivery port allows you to connect your power adapter to the port and passes

USB C to Displayport MST Adapter Our USB C DisplayPort MST adapter allows you to connect two DisplayPort monitors to a source with a USB C port. MST functionality allows the two screens to act independently of each other in extend mode this adapter also supports mirror mode. MST adapters are more suitable for laptops and computers that have limited ports such as 1 USB C port. This adapter allows you to connect two computer screens with 4k@60Hz to your Laptop/computer. When using just one port on the adapter you can achieve 8k@30Hz. For full functionality the source must have a USBC DP Alt mode v1.4. Specification Dual DisplayPort 4k@60Hz Single Port 8k@30Hz 32.4Gbps Bandwidth USB C to 2x