Cables (video, audio, USB) Microsoft Lumia 950 Dual  all cables (video, audio, usb) →

Our LC-ST OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-ST OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our SC-SC OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-LC OM5 Multimode fibre optic patch leads are typically used in 40 100 and 200Gb/s applications.

OM5 fibres are specified in the upcoming versions of the IEC and ISO 11801 standards as an additional Multimode fibre for Enterprise and Data Centre networks.

This fibre is optimised for short division multiplexing and allows multiple short wavelengths in the 850-950nm range. Unlike OM3 and OM4 fibres which are only optimised at 850nm OM5 fibres can carry at least four wavelengths therefore quadrupling the capacity.
OM5 is targeted at upcoming high-speed applications that will use Shortwave Wavelength Division Multiplexing (SWDM).

OM5 Multimode fibre optic patch leads are backwards …

Our LC-LC OM1 Multimode fibre optic patch leads can support 10 Gigabit Ethernet at lengths up 33 meters however it is commonly used for 100 Megabit Ethernet applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM1 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION.

Our LC-SC OM1 Multimode fibre optic patch leads can support 10 Gigabit Ethernet at lengths up 33 meters however it is commonly used for 100 Megabit Ethernet applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM1 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION.

Our LC-ST OM1 Multimode fibre optic patch leads can support 10 Gigabit Ethernet at lengths up 33 meters however it is commonly used for 100 Megabit Ethernet applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM1 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION.

Our LC-ST OM1 Multimode fibre optic patch leads can support 10 Gigabit Ethernet at lengths up 33 meters however it is commonly used for 100 Megabit Ethernet applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM1 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION.

Our ST-SC OM1 Multimode fibre optic patch leads can support 10 Gigabit Ethernet at lengths up 33 meters however it is commonly used for 100 Megabit Ethernet applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM1 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION.

Our FC-LC OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-LC OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3. 00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-SC OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our SC-SC OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our SC-SC OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

These Fibre Pigtails are terminated with a quality ST connector on one end with a 1m length of 900 micron OS2 (Singlemode) fibre

Our ST-SC OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our ST-ST OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our ST-ST OS2 Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.
All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Singlemode patch leads are supplied with a strain relief boot and 3.00mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-LC OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Erika Violet LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our MPO to MPO Trunk Cables have a female MPO connector at each end of the cables and are ideal for creating a structured cabling system including backbone and horizontal interconnections.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads cannot meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form factor that is very similar in size to an LC duplex connector. Using MPO trunk and breakout cables allows much higher density cabling. With them also being CPR Cca rated they are approved for installations in any public sector building and comply …

Our LC-LC OS2 Minizip Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.

The 1.8mm Minizip sheath is a 40% reduction in size from our standard 3.0mm fibre patch leads which is particularly useful in high density patching scenarios and where cable management is restricted.

All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Minizip Singlemode patch leads are supplied with a strain relief boot and 1.8mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE …

Our LC-LC OS2 Minizip Singlemode fibre optic patch leads are used to connect networks over greater distances than Multimode fibre.

The 1.8mm Minizip sheath is a 40% reduction in size from our standard 3.0mm fibre patch leads which is particularly useful in high density patching scenarios and where cable management is restricted.

All assemblies are fully tested during manufacturing and are supplied with test results.
OS2 Minizip Singlemode patch leads are supplied with a strain relief boot and 1.8mm Yellow LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE …

Our LC-LC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-LC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Orange LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION