Cables (video, audio, USB)

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. For use with audio equipment where left and right channels are needed, RED denotes right channel while BLACK denotes left.

Our standard range of audio cables are assembled with Gold connectors for a higher quality finish while providing anti-corrosive properties. The twin RCA connectors are used to connect two pieces of audio equipment with RCA sockets.

Internal Serial ATA data cable with female 7 pin straight connectors. For connecting a SATA device such as a SATA hard drive to the motherboard of a PC.

The CDL-404 is an internal SATA data cable that is 0.45 metres in length. The CDL-404 is for connecting a SATA device such as a SATA hard drive to the motherboard of a PC.

Our right angled range of audio cables are assembled with gold flashed connectors and available in black or white and in various lengths. The right angle connector is easier to connect equipment where a straight connector may cause the cable to bend and risking damage to the cable. While they have strain relief, the right angle can also act as strain relief within itself.

Our right angled range of audio cables are assembled with gold flashed connectors and available in black or white and in various lengths. The right angle connector is easier to connect equipment where a straight connector may cause the cable to bend and risking damage to the cable. While they have strain relief, the right angle can also act as strain relief within itself.

Our straight to right angled range of audio cables are assembled with gold flashed connectors and available in black or white and in various lengths. The right angle connector is easier to connect equipment where a straight connector may cause the cable to bend and risking damage to the cable. While they have strain relief, the right angle can also act as strain relief within itself.

Our straight to right angled range of audio cables are assembled with gold flashed connectors and available in black or white and in various lengths. The right angle connector is easier to connect equipment where a straight connector may cause the cable to bend and risking damage to the cable. While they have strain relief, the right angle can also act as strain relief within itself.

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. Ideal for extending a cable connecting two pieces of audio equipment that have 3.5mm output on one and 3.5mm input on the other. The male type of connector can also be referred to TRS or Tip Ring Sleeve.

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. Ideal for connecting two pieces of audio equipment that have 3.5mm output on one and 3.5mm input on the other. These type of connectors can also be referred to TRS or Tip Ring Sleeve.

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. The Nickel single RCA cable(sometimes known as a phono cable) is for use with audio equipment that have RCA sockets, typical use would be for mono applications or as a left or right channel on stereo equipment.

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. For use with audio equipment where left and right channels are needed, RED denotes right channel while BLACK denotes left.

The USB2-957 is a type A socket to type A socket for coupling type A plugs together or simply converting a male connector in to a female. Gender Changer/Coupler USB 2.0 Type A Socket - Type A Socket Nickel connectors Grey moulded housing

D9 female to female slimline gender changer allows you to change the gender from a male to a female port.

The 88USB2-957 is a type A socket to type A socket for coupling type A plugs together or simply converting a male connector in to a female.

The USB2-952 gender changer is used for converting a standard type A plug into a type B plug for use with devices such as USB 2.0 printers, scanners etc.

Power and data cable for USB devices! This cable can be used to connect a PC to a bus-powered external USB device that has power consumption requirements greater than 500mA (e.g. hard drive enclosures, USB 2.0 hubs etc.). It features two USB Type A connectors: one for data and power, and one for power only. The cable terminates in a Micro B connector for connecting to the device. For bus-powered USB devices with power consumption requirements of up to 1000mA (1amp). Can be used with either USB 1.1 or USB 2.0 peripherals 2 x Type A USB Male to USB Type Micro B Male Fully shielded cable with moulded connectors Technical Specification 1m Cable, from Micro B to 2 x A Connectors. Cable …

Ex-Pro® Samsung Galaxy TAB USB Connection Kit OTG Host Cable for Galaxy Tab 7.7, Galaxy Tab 8.9 and Galaxy Tab 10.1. High quality connection OTG cable for your Samsung Galaxy Tablet. The Samsung Galaxy Tab Connection Kit allows you to connect your Digital Camera via your USB cable. In addition, it supports through Female OTG USB standard port a USB keyboard, USB mouse or USB Flash Disk/Pen Drive directly with your Galaxy Tab. Technical Speciciations > USB Female port for connection of devices. > Compact, lightweight black slick design. High quality adapter - huge Ex-Pro Savings. > 1 Year Ex-Pro Warranty. Part of the Accessories Pro range from Ex-Pro. Compatibility: > Samsung G…

Sync Cable / Black / Length of Cable 150 cm / 28.2 g

Sim Card Adapter / White