Speakers

BPA-series 12V Weatherproof Active SpeakerActive version of the BP-series weatherproof wall-mounted speakers with an internal amplifier and hard-wired 4-core cable for signal and power input. Each spe more→aker can be driven by any 12Vdc power supply with 2A or more current capacity (e.g. 153.754UK) and accepts a mono line level signal input. A suitable alternative to active horn speakers where sound quality is paramount. These speakers can be operated in indoor or sheltered outdoor areas, thanks to the water-resistant polypropylene drivers and sealed cabinets. Designed for CCTV installations, simple background music systems or to extend an existing sound installation without adding further amplifiers.…

FC4V-B compact 100V background speaker 4in, black2-way compact speakers with weatherproof moulded cabinets, making them ideal for gardens, outdoor shelters, health club spa areas and marine applicatio more→ns.2-way speaker system with crossover networkWeatherproofed IP44UV protected ASTM D4329Equalisation switch boosts higher frequencies when outsideGold plated spring terminal connectionsMounting bracket includedAvailable in white or black finishSupplied singleRotary selector switch for 100V line tappings or 8 ohms operationOptional mounting by M6 screw socketsWoofer - 9cm (3.5") PP conePower handling : max. - 80WPower handling : rms - 40WColour - BlackFrequency response - 114Hz - 20kHzSPL @ 1W/1m …

2-way ceiling speakers with flared baffle and a low-profile magnetic grille. The main driver with concentric directional tweeter is operated via a rotary control with 5 x 100V volume tappings and an 8 more→Ohms option. Mount into suspended or false ceilings using the 4 "dog-ear" mounts to achieve a discreet, high quality sound installation. Magnetic frameless grille Rotary selector switch for 100V line tappings or 8 Ohms Discreet, low-profile installation Fitted with "dog-ear" mounts for fixing to suspended or false ceilings The grille can be painted to match the decor Supplied singly Cutout - 202mm Mounting depth - 99mm Dimensions - 102 x 232mm Woofer - 165mm (6.5") Tweeter - …

Tough, Water-Resistant 600D Black Polyester Exterior Fabric Soft, 210D Polyester Interior Fabric with 10mm Foam Padding for Protection Top Handle Cutout with Hook-and-Loop Flap Closure Exterior Dim more→ensions: 20”/508mm (L) x 16”/406mm (W) x 28.5”/724mm (H), Net Weight: 1.8 lbs./0.82 kg Interior Dimensions: 19.5”/495mm (L) x 15.5”/394mm (W) x 28”/711mm (H)

The IsoAcoustics GAIA 1 Bowers & Wilkins Adaptor Plates (4 Pack) are ideal for owners of Bowers & Wilkins Nautilus and Diamond series speakers looking to enhance performance with GAIA isolators. This more→adapter replaces the ball casters providing a secure M12-1.25 threaded hole. Installation is straightforward using the existing fasteners and the robust stainless steel ensures longevity. Compatible with B&W 800 D 801 Nautilus 801 D 802 D 802 Nautilus 802 D2 802 D3 and more this four-pack offers a practical solution for improving speaker stability and sound quality.

The IsoAcoustics GAIA 1 Carpet Disks (4 Pack) support speakers using the IsoAcoustics GAIA Isolators on carpeted floors. Designed specifically to fit the GAIA 1 with a 59mm diameter the 15mm stainless more→steel spikes ensure stability even in thick carpets and underlays. These carpet disks are easy to install making them ideal for audiophiles looking to optimise their sound systems.

The IsoAcoustics GAIA 1 Carpet Disks (4 Pack) support speakers using the IsoAcoustics GAIA Isolators on carpeted floors. Designed specifically to fit the GAIA 2 with a 52mm diameter the 15mm stainless more→steel spikes ensure stability even in thick carpets and underlays. These carpet disks are easy to install making them ideal for audiophiles looking to optimise their sound systems.

The IsoAcoustics GAIA 1 Carpet Disks (4 Pack) support speakers using the IsoAcoustics GAIA Isolators on carpeted floors. Designed specifically to fit the GAIA 3 with a 45mm diameter the 15mm stainless more→steel spikes ensure stability even in thick carpets and underlays. These carpet disks are easy to install making them ideal for audiophiles looking to optimise their sound systems.

Very compact design for highly portable applications. 2,000Hz recommended min. crossover freq (12dB/oct). Single piece polyimide film diaphragm and surround.Power Rating: Tested for two hours on plane more→wave tube using continuous band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.Continuous Power Rating is defined as 3dB greater than the AES rating.Sensitivity measured on axis at 1W/1m, using typical horn, in 2Π anechoic environment. Weight: 0,36 kg Diameter (inch): 1.4 Variant: 16 Ohm Type: PA Power (Watt): 70.0 Frequency Range: 1500 Hz - 20 kHz Power: 70 W Magnet Type: Neodymium Impedance: 16 Ohm Made in: China Sensitivity: 106 dB

The FONESTAR SISTEMAS Vulkan 50 exponential horn loudspeaker in white is a sleek and modern addition to any TV or audio setup. With its innovative design, this speaker offers superior sound quality an more→d clarity, perfect for enhancing your viewing and listening experience.The exponential horn design of the speaker ensures optimal sound dispersion and coverage, allowing you to enjoy immersive audio no matter where you are in the room. The white color adds a touch of elegance to any space, making it a stylish addition to your home entertainment system.Whether you're watching your favorite TV show, listening to music, or hosting a movie night with friends, the FONESTAR SISTEMAS Vulkan 50 loudspeaker …

SC16V slimline indoor column speaker - 100V Slimline column speakers suitable for indoor applications, especially where discretion is a necessity. Made from extruded aluminium with a white protective more→finish, fitted with a white metal grille and white plastic end caps. Fitted with high quality speakers providing crisp, clear sound reproduction and a 100V line transformer. Supplied with mounting brackets Adjustable volume tappings Fitted with 900mm of connecting cable Drivers - 4 x 63mm (2.5") Power handling : rms - 16W Power handling : max. - 32W Tappings - 12W, 6W, 3W, 1.5W & 8 Ohms Impedance (nominal) - 8 Ohms Dimensions - 105 x 410 x 90mm Weight - 2.3kg SPL @ 1W/1m - 91dB Impedance …

A Pair of discreet white fabric grilles designed to fit to the front of the DALI OBERON On-Wall speakers. Both grilles come with the DALI logo inset on a small aluminium square.

Compact, lightweight and reliable, the CDX1-1445 compression driver provides 40W continuous power handling (20W RMS AES standard) and 106 dB sensitivity. An ideal replacement HF unit for compact two-w more→ay and three-way cabs, CDX1-1445 features a number of proprietary Celestion technologies, for greatly reduced distortion and enhanced performance. Weight: 1,5 kg Magnet Type: Ferrite Type: PA Impedance: 16 Ohm Frequency Range: 1500 Hz - 20 kHz Power (Watt): 40.0 Sensitivity: 106 dB Diameter (inch): 1.0 Made in: China Power RMS (Watt): 20.0 Power RMS: 20 W Power: 40 W Diameter: 1"

With the same high performance and reliability as the CDX1-1445, this version of the popular compact and lightweight compression driver features an industry-standard 35mm/1.38” diameter screw fi more→tting. Provides 40 W continuous power handling (20 W RMS AES standard) and 106dB sensitivity, includes a number of proprietary Celestion technologies to ensure a low distortion performance time after time. Diameter (inch): 1.0 Magnet Type: Ferrite Frequency Range: 1500 Hz - 20 kHz Made in: China Power (Watt): 40.0 Impedance: 8 Ohm Power: 40 W Power RMS (Watt): 20.0 Sensitivity: 106 dB Diameter: 1" Type: PA Power RMS: 20 W Weight: 1,5 kg

1" exit ferrite magnet compression driver.Single piece polyamide diaphragm and surroundIntegrated diaphragm and rear cover for ease of replacement2,200Hz recommended min. crossover freq (12dB/oct) Pow more→er (Watt): 70.0 Frequency Range: 1500 Hz - 20 kHz Weight: 1,5 kg Power RMS: 35 W Type: PA Diameter (inch): 1.0 Sensitivity: 106 dB Diameter: 1" Made in: China Magnet Type: Ferrite Power RMS (Watt): 35.0 Power: 70 W Impedance: 8 Ohm

Repair kit for Celestion G12T-75/G12K-100 speaker, 8 Ohm. Instructions and glue not included. Package Contents: Voice Coil;Dust Cap;Cone;Spider;Suspention Diameter: 12" Compatible with: Celestion G12K more→-100;Celestion G12T-75 Made in: China Type: Repair Kit;Speaker unit Suitable for Brand: Celestion Impedance: 8 Ohm